We consider a wireless sensor network, consisting of N heterogeneous sensors and a fusion center (FC), that is tasked with solving a binary distributed detection problem. Each sensor is capable of harvesting randomly arrived energy and storing it in a finite capacity battery. Sensors are informed of their fading channel states, via a bandwidth-limited feedback channel from the FC. Each sensor has the knowledge of its current battery state and its channel state (quantized channel gain). Our goal is to study how sensors should choose their transmit powers such that J-divergence of the received signal densities under two hypotheses at the FC is maximized, subject to certain (battery and power) constraints. We derive the optimal power map, which depends on the energy arrival rate, the battery capacity, and the battery states probabilities at the steady state. Using the optimal power map, each sensor optimally adapts its transmit power, based on its battery state and its channel state. Our simulation results demonstrate the performance of our proposed power adaptation scheme for different system parameters.
We consider a network, tasked with solving binary distributed detection, consisting of N sensors, a fusion center (FC), and a feedback channel from the FC to sensors. Each sensor is capable of harvesting energy and is equipped with a finite size battery to store randomly arrived energy. Sensors process their observations and transmit their symbols to the FC over orthogonal fading channels. The FC fuses the received symbols and makes a global binary decision. We aim at developing adaptive channel-dependent transmit power control policies such that J-divergence based detection metric is maximize…
Traditional Internet of Things (IoT) sensors rely on batteries that need to be replaced or recharged frequently which impedes their pervasive deployment. A promising alternative is to employ energy harvesters that convert the environmental energy into electrical energy. Kinetic Energy Harvesting (KEH) converts the ambient motion/vibration energy into electrical energy to power the IoT sensor nodes. However, most previous works employ KEH without dynamically tracking the optimal operating point of the transducer for maximum power output. In this paper, we systematically analyse the relation bet…
Historically, battery is the power source for mobile, embedded and remote system applications. However, the development of battery techniques does not follow the Moore's Law. The large physical size, limited electric quantity and high-cost replacement process always restrict the performance of the application such as embedded systems, wireless sensors networks and lower-power electronics. Energy harvesting, a technique which enables the applications to scavenge energy from RF signal from TV towers, solar energy, piezoelectric driven by motion of people and thermal energy from the temperature d…
We consider an energy harvesting information update system where a sensor is allowed to choose a transmission mode for each transmission, where each mode consists of a transmission power-error pair. We also incorporate the battery phenomenon called battery recovery effect where a battery replenishes the deliverable energy if kept idle after discharge. For an energy-limited age of information (AoI) system, this phenomenon gives rise to the interesting trade-off of recovering energy after transmissions, at the cost of increased AoI. Considering two metrics, namely peak-age hitting probability an…
Indoor beacon system is a cornerstone of internet of things. Until now, most of the research effort has focused on achieving various applications based on beacon communication. However, the power consumption on beacon devices becomes the bottleneck for the large-scale deployments of indoor networks. On one hand, the size of beacon devices is required to be small enough for easy deployment, which further limits the size of battery. On the other hand, replacing the batteries of the beacon devices could lead to high maintenance costs. It is important to provide them with full energy autonomy. To …
This paper proposes a received signal strength (RSS) based localization framework for energy harvesting underwater optical wireless sensor networks (EH-UOWSNs), where the optical noise sources and channel impairments of seawater pose significant challenges on range estimation. In UOWSNs energy limitation is another major problem due to the limited battery power and difficulty to replace or recharge the battery of an underwater sensor node. In the proposed framework, sensor nodes with insufficient battery harvest ambient energy and start communicating once they have sufficient storage of energy…
Energy harvesting (EH) is a promising technique to fulfill the long-term and self-sustainable operations for Internet of things (IoT) systems. In this paper, we study the joint access control and battery prediction problems in a small-cell IoT system including multiple EH user equipments (UEs) and one base station (BS) with limited uplink access channels. Each UE has a rechargeable battery with finite capacity. The system control is modeled as a Markov decision process without complete prior knowledge assumed at the BS, which also deals with large sizes in both state and action spaces. First, …
The concept of sensor networks (WSNs) has become an important component of the recently proposed cyber-physical systems (CPSs) and Internet of Things which can connect the physical world with embedded software systems. Energy- harvesting (EH) as an enabling technology applied in SNs can heavily reduce the installation and maintenance cost as well as increase system life, flexibility, and scalability as the EH is subject to the important "energy interruption" problem where system tasks can be significantly disrupted by the EH outputs. This problem not only affects the system modeling but also r…
We consider an energy harvesting sensor that is sending measurement updates regarding some physical phenomenon to a destination. The sensor relies on energy harvested from nature to measure and send its updates, and is equipped with a battery of finite size to collect its harvested energy. The energy harvesting process is Poisson with unit rate, and arrives in amounts that fully recharge the battery. Our setting is online in the sense that the times of energy arrivals are revealed causally to the sensor after the energy is harvested; only the statistics of the arrival process is known a priori…
We consider status updating under inexact knowledge of the battery level of an energy harvesting (EH) sensor that sends status updates about a random process to users via a cache-enabled edge node. More precisely, the control decisions are performed by relying only on the battery level knowledge captured from the last received status update packet. Upon receiving on-demand requests for fresh information from the users, the edge node uses the available information to decide whether to command the sensor to send a status update or to retrieve the most recently received measurement from the cache…
We consider a wireless sensor network, consisting of N heterogeneous sensors and a fusion center (FC), tasked with detecting a known signal in uncorrelated Gaussian noises. Each sensor can harvest randomly arriving energy and store it in a finite-size battery. Sensors communicate directly with the FC over orthogonal fading channels. Each sensor adapts its transmit symbol power, such that the larger its stored energy and its quantized channel gain are, the higher its transmit symbol power is. To strike a balance between energy harvesting and energy consumption, we formulate two constrained opti…
We consider a wireless sensor network, consisting of N heterogeneous sensors and a fusion center (FC), tasked with solving a binary distributed detection problem. Sensors communicate directly with the FC over orthogonal fading channels. Each sensor can harvest randomly arriving energy and store it in a battery. Also, it knows its quantized channel state information (CSI), acquired via a limited feedback channel from the FC. We propose a transmit power control strategy such that the J-divergence based detection metric is maximized, subject to an average transmit power per sensor constraint. The…
Internet of things (IoT) is a revolutionizing technology which aims to create an ecosystem of connected objects and embedded devices and provide ubiquitous connectivity between trillions of not only smart devices but also simple sensors and actuators. Although recent advancements in miniaturization of devices with higher computational capabilities and ultra-low power communication technologies have enabled the vast deployment of sensors and actuators everywhere, such an evolution calls for fundamental changes in hardware design, software, network architecture, data analytic, data storage and p…
Advances in low-power electronics and machine learning techniques lead to many novel wearable IoT devices. These devices have limited battery capacity and computational power. Thus, energy harvesting from ambient sources is a promising solution to power these low-energy wearable devices. They need to manage the harvested energy optimally to achieve energy-neutral operation, which eliminates recharging requirements. Optimal energy management is a challenging task due to the dynamic nature of the harvested energy and the battery energy constraints of the target device. To address this challenge,…
A sensor node that is sending measurement updates regarding some physical phenomenon to a destination is considered. The sensor relies on energy harvested from nature to transmit its updates, and is equipped with a finite $B$-sized battery to save its harvested energy. Energy recharges the battery incrementally in units, according to a Poisson process, and one update consumes one energy unit to reach the destination. The setting is online, where the energy arrival times are revealed causally after the energy is harvested. The goal is to update the destination in a timely manner, namely, such t…
Wireless Sensor Networks (WSNs) are extensively used in monitoring applications such as humidity and temperature sensing in smart buildings, industrial automation, and predicting crop health. Sensor nodes are deployed in remote places to sense the data information from the environment and to transmit the sensing data to the Base Station (BS). When a sensor is drained of energy, it can no longer achieve its role without a substituted source of energy. However, limited energy in a sensor's battery prevents the long-term process in such applications. In addition, replacing the sensors' batteries …
An energy-harvesting sensor node that is sending status updates to a destination is considered. The sensor is equipped with a battery of finite size to save its incoming energy, and consumes one unit of energy per status update transmission, which is delivered to the destination instantly over an error-free channel. The setting is online in which the harvested energy is revealed to the sensor causally over time, and the goal is to design status update transmission policy such that the long term average age of information (AoI) is minimized. AoI is defined as the time elapsed since the latest u…
With the growing number of deployments of Internet of Things (IoT) infrastructure for a wide variety of applications, the battery maintenance has become a major limitation for the sustainability of such infrastructure. To overcome this problem, energy harvesting offers a viable alternative to autonomously power IoT devices, resulting in a number of battery-less energy harvesting IoTs (or EH-IoTs) appearing in the market in recent years. Standards activities are also underway, which involve wireless protocol design suitable for EH-IoTs as well as testing procedures for various energy harvesting…
We study power control for an energy harvesting communication system with independent and identically distributed Bernoulli energy arrivals. It is assumed that the transmitter is equipped with a finite-sized rechargeable battery and is able to look ahead to observe a fixed number of future arrivals. A complete characterization is provided for the optimal power control policy that achieves the maximum long-term average throughput over an additive white Gaussian noise channel.
The time average expected age of information (AoI) is studied for status updates sent from an energy-harvesting transmitter with a finite-capacity battery. The optimal scheduling policy is first studied under different feedback mechanisms when the channel and energy harvesting statistics are known. For the case of unknown environments, an average-cost reinforcement learning algorithm is proposed that learns the system parameters and the status update policy in real time. The effectiveness of the proposed methods is verified through numerical results.
Intensive research on energy harvested sensor nodes with traditional battery powered devices has been driven by the challenges in achieving the stringent design goals of battery lifetime, information accuracy, transmission distance, and cost. This challenge is further amplified by the inherent power intensive nature of long-range communication when sensor networks are required to span vast areas such as agricultural fields and remote terrain. Solar power is a common energy source is wireless sensor nodes, however, it is not reliable due to fluctuations in power stemming from the changing seaso…
Magnetic field energy harvesting (MFEH) is a method by which a system can harness an ambient, alternating magnetic field in order to scavenge energy. Presented in this article is a novel application of the concept aimed at the magnetic fields surrounding the rail current in electrified railway. Due to its non-invasive nature, the approach has the potential to be widely deployed as part of low-cost trackside condition monitoring systems in order to increase lifetime and reduce maintenance requirements. In this work, the viability of MFEH in railway is substantiated experimentally -- two differe…
To sustain communication reliability and use the harvested energy effectively, it is crucial to consider energy sharing between energy harvesting tags (EHT) in a multiple access network, which are basic building blocks for the internet of things (IoT) applications. This technique also achieves higher throughput compared with the non-cooperative strategies despite energy losses occurred during energy transfer. We propose an energy cooperative communication strategy for a multiple access network of tags that depends on the harvested battery energy. We develop an optimal transmission policy for E…
Federated Learning With Energy Harvesting Devices: An MDP Framework
Department of Electronic and Computer Engineering, The Hong Kong University of Science and Technology（香港科技大学电子与计算机工程系）；School of Electrical Engineering and Computer Science, Washington State University（华盛顿州立大学电气与计算机科学学院）
