Block copolymer are ideal matrices to control the localisation of colloids. Furthermore, anisotropic nanoparticles such as Janus nanoparticles possess an additional orientational degree of freedom that can play a crucial role in the formation of highly ordered materials made of block copolymers. This work presents a mesoscopic simulation method to assert the co-assembly of Janus nanoparticles in a block copolymer mixture, finding numerous instances of aggregation and formation of ordered configurations which can be related to dispersions of pure Janus colloids. Comparison with chemically homogeneous neutral nanoparticles determines that Janus nanoparticles are less prone to induce bridging along lamellar domains, thus being a less destructive way to segregate nanoparticles at interfaces. The combination of asymmetric block copolymer and asymmetric Janus nanoparticles can result in assembly of colloids in an even number of layers within one of the block domains.
We report on the structural properties of mixed aggregates made from rare-earth inorganic nanoparticles (radius 20 Angstroms) and polyelectrolyte-neutral block copolymers in aqueous solutions. Using scattering experiments and Monte Carlo simulations, we show that these mixed aggregates have a hierarchical core-shell microstructure. The core is made of densely packed nanoparticles and it is surrounded by a corona of neutral chains. This microstructure results from a process of controlled association and confers to the hybrid aggregates a remarkable colloidal stability.
A novel type of hybrid colloids is presented, based on the association of several polymeric systems and ferrofluids. On the one hand, we use inorganic nanoparticles made of magnetic iron oxide prepared at the LI2C, which response to a magnetic field of low intensity. On the other hand the organic part is made either of long linear polyacrylamide chains or of mesoscopic structures (vesicles and micelles) self-assembled from amphiphile polybutadiene-b-poly(glutamic acid) di-block copolymers, which conformation is pH-sensitive.
We explore the pressure versus temperature phase diagram of dimeric Janus nanoparticles using Molecular Dynamics simulations. The nanoparticle was modeled as a dumbbells particle, and have one monomer that interacts by a standard Lennard Jones potential and another monomer that is modeled using a two-length scale shoulder potential. Monomeric and dimeric systems modeled by this shoulder potential show waterlike anomalies, and we investigate if a Janus nanoparticle composed by one anomalous monomer will exhibit anomalous behavior and self-assembly structures. The influence of the non-anomalous …
During the past years we have investigated the complexation between nanocolloids and oppositely charged polymers. The nanocolloids examined were ionic surfactant micelles and inorganic oxide nanoparticles. For the polymers, we used homopolyelectrolytes and block copolymers with linear and comb architectures. In general, the attractive interactions between oppositely charged species are strong and as such, the simple mixing of solutions containing dispersed constituents yield to a precipitation, or to a phase separation. We have developed means to control the electrostatically-driven attraction…
In this article, we study the thermodynamic behavior of anisotropic shape (rod and disk) nanoparticle within the block copolymer matrix by using self-consistent field theory (SCFT) simulation. In particular, we introduce various defect structures of block copolymers to precisely control the location of anisotropic particles. Different from the previous studies using spherical nanoparticles within the block copolymer model defects, anisotropic particles are aligned with preferred orientation near the defect center due to the combined effects of stretching and interfacial energy of block copolym…
A static light scattering (SLS) study of bovine serum albumin (BSA) mixtures with two anionic graft copolymers of poly (sodium acrylate-co-sodium 2-acrylamido-2-methyl-1-propanesulphonate)-graft-poly (N, N-dimethylacrylamide), with a high composition in poly (N, N-dimethylacrylamide) (PDMAM) side chains, revealed the formation of oppositely charged complexes, at pH lower than 4.9, the isoelectric point of BSA. The core-corona nanoparticles formed at pH = 3.00, were characterized. Their molecular weight and radius of gyration were determined by SLS, while their hydrodynamic radius was determine…
We use Molecular Dynamics simulations to explore the properties of dimmeric Janus nanoparticles. The nanoparticles are modeled as dumbbells. One kind of monomer interacts by a Lennard-Jones potential, while the other specie of monomer interacts though a two length scale potential. This specific two length scale potential do not present waterlike anomalies in bulk. However, our results shows that, when combined in a dimmer, the Janus nanoparticle will have waterlike anomalies. The self-assembly properties were also explored. We observe several kinds of micelles, and a liquid-crystal phase. This…
Block copolymer melts self-assemble in the bulk into a variety of nanostructures, making them perfect candidates to template the position of nanoparticles. The morphological changes of block copolymers are studied in the presence of a considerable filling fraction of colloids. Furthermore, colloids can be found to assemble into ordered hexagonally close-packed structures in a defined number of layers when softly confined within the phase-separated block copolymer. A high concentration of interface-compatible nanoparticles leads to complex block copolymer morphologies depending on the polymeric…
We present a systematic investigation of static and dynamic properties of block copolymer micelles with crosslinked cores, representing model polymer-grafted nanoparticles, over a wide concentration range from dilute regime to an arrested (crystalline) state, by means of light and neutron scattering, complemented by linear viscoelasticity. We have followed the evolution of their scattering intensity and diffusion dynamics throughout the non-ergodicity transition and the observed results have been contrasted against appropriately coarse-grained Langevin Dynamics simulations. These stable model …
Molecular dynamics simulations are carried out to study the translational and rotational diffusion of a single Janus particle immersed in a dense Lennard-Jones fluid. We consider a spherical particle with two hemispheres of different wettability. The analysis of the particle dynamics is based on the time-dependent orientation tensor, particle displacement, as well as the translational and angular velocity autocorrelation functions. It was found that both translational and rotational diffusion coefficients increase with decreasing surface energy at the nonwetting hemisphere, provided that the w…
We present a systematic investigation of static and dynamic properties of block copolymer micelles with crosslinked cores, representing model polymer-grafted nanoparticles, over a wide concentration range from dilute regime to an arrested (crystalline) state, by means of light and neutron scattering, complemented by linear viscoelasticity. We have followed the evolution of their scattering intensity and diffusion dynamics throughout the non-ergodicity transition and the observed results have been contrasted against appropriately coarse-grained Langevin Dynamics simulations. These stable model …
In this review, we address the issue of the electrostatic complexation between charged-neutral diblock copolymers and oppositely charged nanocolloids. We show that nanocolloids such as surfactant micelles and iron oxide magnetic nanoparticles share similar properties when mixed with charged-neutral diblocks. Above a critical charge ratio, core-shell hierarchical structures form spontaneously under direct mixing conditions. The core-shell structures are identified by a combination of small-angle scattering techniques and transmission electron microscopy. The formation of multi-level objects is …
The presence of nanoparticles in a diblock copolymer leads to changes in the morphology and properties of the matrix and can produce highly organized hybrid materials. The resulting material properties depend not only on the polymer composition but also on the size, shape, and surface properties of the colloids. The dynamics of this kind of systems using a hybrid mesoscopic approach has been studied in this work. A continuum description for the polymer is used, while colloids are individually resolved. The method allows for a variable preference of the colloids, which can have different sizes,…
The self-assembly of copolymeric vesicles and micelles in micromixers is studied by External Potential Dynamics (EPD) simulations -- a dynamic density functional approach that explicitly accounts for the polymer architecture both at the level of thermodynamics and dynamics. Specifically, we focus on the co-solvent method, where nanoparticle precipitation is triggered by mixing a poor co-solvent into a homogeneous copolymer solution in a micromixer. Experimentally, it has been reported that the flow rate in the micromixers influences the size of the resulting particles as well as their morpholo…
Nanocomposite materials made of block copolymer and nanoparticles display properties which can be different from the purely polymeric matrix. The resulting material is a crossover of the original properties of the block copolymer and the presence of the assembled nanoparticles. We propose a mesoscopic study via cell dynamic simulations to quantitatively assert the properties of such hybrid materials. The most relevant parameters are identified to be the fraction of nanoparticles in the system and its chemical affinity, while the nanoparticle size with respect to the block copolymer length scal…
This work presents a general and unified theory describing block copolymer self-assembly in the presence of free surfaces and nanoparticles in the context of Self-Consistent Filed Theory. Specifically, the derived theory applies to free and tethered polymer chains, nanoparticles of any shape, arbitrary non-uniform surface energies and grafting densities, and takes into account a possible formation of triple-junction points (e.g., polymer-air-substrate). One of the main ingredients of the proposed theory is a simple procedure for a consistent imposition of boundary conditions on surfaces with n…
When polyelectrolyte-neutral block copolymers are mixed in aqueous solutions with oppositely charged species, stable complexes are found to form spontaneously. The mechanism is based on electrostatics, and on the compensation between the opposite charges. Electrostatic complexes exhibit a core-shell microstructure. In the core, the polyelectrolyte blocks and the oppositely charged species are tightly bound and form a dense coacervate microphase. The shell is made of the neutral chains and surrounds the core. In this paper, we report on the structural and magnetic properties of such complexes m…
We investigate by scattering techniques the structure of water-based soft composite materials comprising a crystal made of Pluronic block-copolymer micelles arranged in a face-centered cubic lattice and a small amount (at most 2% by volume) of silica nanoparticles, of size comparable to that of the micelles. The copolymer is thermosensitive: it is hydrophilic and fully dissolved in water at low temperature (T ~ 0°C), and self-assembles into micelles at room temperature, where the block-copolymer is amphiphilic. We use contrast matching small-angle neuron scattering experiments to probe indepen…
The diffusion of a Janus rod-shaped nanoparticle in a dense Lennard-Jones fluid is studied using molecular dynamics (MD) simulations. The Janus particle is modeled as a rigid cylinder whose atoms on each half-side have different interaction energies with fluid molecules, thus comprising wetting and nonwetting surfaces. We found that both rotational and translational diffusion coefficients are larger for Janus particles with higher wettability contrast, and these values are bound between the two limiting cases of uniformly wetting and nonwetting particles. It was also shown that values of the d…
Confinement has been suggested as a tool to tune the self-assembly properties of nanoparticles, surfactants, polymers and colloids. In this way, we explore the phase diagram of Janus nanoparticles using Molecular Dynamics simulations. The nanoparticle was modeled as a dimer made by one monomer that interacts by a standard Lennard Jones potential and another monomer that is modeled using a two-length scale shoulder potential. This specific design of nanoparticle exhibits in bulk distinct self-assembled structures and water-like diffusion anomaly. Our results indicate that besides the aggregates…
Surface Block Identity Controls Transport of Symmetric Diblock Copolymer Through Nanopores
University of Pennsylvania（宾夕法尼亚大学）；Université de Lyon, CNRS, Université Claude Bernard Lyon 1, INSA Lyon, Université Jean Monnet（里昂大学、法国国家科学研究中心、里昂第一大学、里昂国立应用科学学院、让·莫内大学）；KU-KIST Graduate School of Converging Science and Technology, Korea University（高丽大学-韩国科学技术院融合科学与技术研究生院）
When polyelectrolyte-neutral block copolymers are mixed in solutions to oppositely charged species (e.g. surfactant micelles, macromolecules, proteins etc), there is the formation of stable supermicellar aggregates combining both components. The resulting colloidal complexes exhibit a core-shell structure and the mechanism yielding to their formation is electrostatic self-assembly. In this contribution, we report on the structural properties of supermicellar aggregates made from yttrium-based inorganic nanoparticles (radius 2 nm) and polyelectrolyte-neutral block copolymers in aqueous solution…
Simulations and experiments of nanorods (NRs) show that co-assembly with block copolymer (BCP) melts leads to the formation of a superstructure of side-to-side NRs perpendicular to the lamellar axis. A mesoscopic model is validated against scanning electron microscopy (SEM) images of CdSe NRs mixed with polystyrene-block-poly(methyl methacrylate). It is then used to study the co-assembly of anisotropic nanoparticles (NPs) with a length in the same order of magnitude as the lamellar spacing. The phase diagram of BCP/NP is explored as well as the time evolution of the NR. NRs that are slightly l…
While alloy, core-shell and Janus binary nanoclusters are found in more and more technological applications, their formation mechanisms are still poorly understood, especially during synthesis methods involving physical approaches. In this work, we employ a very simple model of such complex systems using Lennard-Jones interactions and inert gas quenching. After demonstrating the ability of the model to well reproduce the formation of alloy, core-shell or Janus nanoparticles, we studied their temporal evolution from the gas via droplets to nanocrystalline particles. In particular, we showed tha…
A hybrid block copolymer(BCP) nanocomposite computational model is proposed to study nanoparticles(NPs) with a generalised shape including squares, rectangles and rhombus. Simulations are used to study the role of anisotropy in the assembly of colloids within BCPs, ranging from NPs that are compatible with one phase, to neutral NPs. The ordering of square-like NPs into grid configurations within a minority BCP domain was investigated, as well as the alignment of nanorods in a lamellar-forming BCP, comparing the simulation results with experiments of mixtures of nanoplates and PS-\textit{b}-PMM…
We perform molecular dynamics simulations to understand the translational and rotational diffusion of Janus nanoparticles at the interface between two immiscible fluids. Considering spherical particles with different affinity to fluid phases, both their dynamics as well as the fluid structure around them are evaluated as a function of particle size, amphiphilicity, fluid density, and interfacial tension. We show that as the particle amphiphilicity increases due to enhanced wetting of each side with its favorite fluid, the rotational thermal motion decreases. Moreover, the in-plane diffusion of…
In this feature article, we provide an overview of our research on statistical copolymers as a coating material for metal oxide nanoparticles and surfaces. These copolymers contain functional groups enabling non-covalent binding to oxide surfaces and poly(ethylene glycol) (PEG) polymers for colloidal stability and stealthiness. The functional groups are organic derivatives of phosphorous acid compounds R-H$_2$PO$_3$, also known as phosphonic acids that have been screened for their strong affinity to metals and their ability to build multidentate binding. Herein we develop a polymer-based coati…
The effect of silica nanoparticles on transient microemulsion networks made of microemulsion droplets and telechelic copolymer molecules in water is studied, as a function of droplet size and concentration, amount of copolymer, and nanoparticle volume fraction. The phase diagram is found to be affected, and in particular the percolation threshold characterized by rheology is shifted upon addition of nanoparticles, suggesting participation of the particles in the network. This leads to a peculiar reinforcement behaviour of such microemulsion nanocomposites, the silica influencing both the modul…
We study the effects of heterogeneity on interfacial pinning and hydrodynamic drag using molecular dynamics (MD) simulations of Janus nanospheres at a liquid/vapor interface. We construct the free energy landscape for this system, both in the continuum approximation using surfaces tensions and the flat-interface approximation and atomistically using MD and thermodynamic integration. The results of the two methods differ in detail due to interfacial distortion and finite width, as well as thermal fluctuations, and only the MD landscape is consistent with simulations of a nanosphere approaching …
Self-assembly of nanoparticles at fluid-fluid interfaces is a promising route to fabricate functional materials from the bottom-up. However, directing and controlling particles into highly tunable and predictable structures -- while essential -- is a challenge. We present a liquid interface assisted approach to fabricate nanoparticle structures with tunable properties. To demonstrate its feasibility, we study magnetic Janus particles adsorbed at the interface of a spherical droplet placed on a substrate. With an external magnetic field turned on, a single particle moves to the location where i…
Nanostructured polymer-metal oxide composites are a current research area of great importance due to its highlight applications in sensors, optics, catalysts and drug delivery. Particularly the use of thermoresponsive polymers gives more flexibilities and possibilities in the design and construction of polymer templates. In the present investigation, the structure and magnetic properties of hybrid metal oxide/DBC films composed of two kinds of polystyrene-block-poly (N-isopropylacrylamide)(PS-b-PNIPAM) diblock copolymers (DBCs) with PS and PNIPAM as the major polymer domains respectively, and …
We explore the shape and internal structure of diblock copolymer (di-BCP) nanoparticles (NPs) by using the Ginzburg-Landau free-energy expansion. The self-assembly of di-BCP lamellae confined in emulsion droplets can form either ellipsoidal or onion-like NPs. The corresponding inner structure is a lamellar phase that is either perpendicular to the long axis of the ellipsoids (L$_\perp$) or forms a multi-layer concentric shell (C$_\parallel$), respectively. We focus on the effects of the interaction parameter between the A/B monomers $τ$, and the polymer/solvent $χ$, as well as the NP size on t…
We report a novel class of polymer nanocomposite composed of organic nanoparticles dispersed in polymer matrix, with the particle sizes of 30-120 nm in radius. The organic nanoparticles were formed by the self-assembly of protonated poly(4-vinyl-pyridine)-r-poly(acrylonitrile) and amphiphilic metanil yellow dye molecules through electrostatic interactions in aqueous solution. A strongly broadened Raman shift band was probed, suggesting the presence of enhanced optoelectronic property from the polymer nanocomposite. Here, using random-copolymer polyelectrolytes and mesogenic amphiphiles as the …
We use computer simulation to investigate the self-assembly of Janus-like amphiphilic peanut-shaped nanoparticles, finding phases of clusters, bilayers and micelles in accord with ideas of packing familiar from the study of molecular surfactants. However, packing arguments do not explain the hierarchical self-assembly dynamics that we observe, nor the coexistence of bilayers and faceted polyhedra. This coexistence suggests that experimental realizations of our model can achieve multipotent assembly of either of two competing ordered structures.
Self-assembly and dynamical properties of Janus nanoparticles have been studied by molecular dynamic simulations. The nanoparticles are modeled as dimers and they are confined between two flat parallel plates to simulate a thin film. One monomer from the dumbbells interacts by a standard Lennard Jones potential and the other by a two-length scales shoulder potential, typically used for anomalous fluids. Here, we study the effects of remove the Brownian effects, typical from colloidal systems immersed in aqueous solution, and consider a molecular system, without the drag force and the random co…
The unique physical and optical properties of nanoparticles make their reliable and rapid assembly an important goal for nanotechnology. To this end, many competing driving forces have been targeted to control the self-assembly, though issues with reliability and efficiency indicate that interfaces on the nanoscale are not yet fully understood. In this letter we report for the first time that the flow of water media from the interface between chemically nanopatterned hydrophobic surfaces and adjacent hydrophilic regions (a Janus interface) can effectively be employed for rapid nanoparticle ass…
Particle-Mediated Tuning of Defect Stability in Lamellar Block Copolymer Systems
Institute of Physics, Johannes Gutenberg University Mainz（美因茨约翰内斯·古腾堡大学物理研究所）；Instituto de Física del Sur (IFISUR), Consejo Nacional de Investigaciones Científicas y Técnicas (CONICET), Universidad Nacional del Sur（南方物理研究所（IFISUR），阿根廷国家科学研究委员会（CONICET），南方国立大学）
The generation of nanoscale square and stripe patterns is of major technological importance since they are compatible with industry-standard electronic circuitry. Recently, a blend of diblock copolymer interacting via hydrogen-bonding was shown to self-assemble in square arrays. Motivated by those experiments we study, using Monte Carlo simulations, the pattern formation in a two-dimensional binary mixture of colloidal particles interacting via isotropic core-corona potentials. We find a rich variety of patterns that can be grouped mainly in aggregates that self-assemble in regular square latt…
We report the results from a computational study of the self-assembly of amphiphilic di-tethered nanospheres using molecular simulation. As a function of the interaction strength and directionality of the tether-tether interactions, we predict the formation of four highly ordered phases not previously reported for nanoparticle systems. We find a double diamond structure comprised of a zincblende (binary diamond) arrangement of spherical micelles with a complementary diamond network of nanoparticles (ZnS/D); a phase of alternating spherical micelles in a NaCl structure with a complementary simp…
Co-assembly of inorganic nanoparticles (NPs) and nanostructured polymer matrix represents an intricate interplay of enthalpic or entropic forces. Particle size largely affects the phase behavior of the nanocomposite. Theoretical studies indicate that new morphologies would emerge when the particles become comparable to the soft matrix's size, but this has rarely been supported experimentally. By designing a multicomponent blend composed of NPs, block copolymer-based supramolecules, and small molecules, a 3-D ordered lattice beyond the native BCP's morphology was recently reported when the part…
A paradigm proposed recently by Boal et al. (A.K. Boal et al., Nature 404, 746-748, 2000) deals with the possibility to use inorganic nanoparticles as building blocks for the design and fabrication of colloidal and supracolloidal assemblies. It is anticipated that these constructs could be made of different shapes, patterns and functionalities and could constitute the components of future nanodevices including sensors, actuators or nanocircuits. Here we report a protocol that allowed us to fabricate such nanoparticle aggregates. The building blocks of the constructs were anionically coated iro…
We report the formation of stable nanoparticle-polymer clusters obtained by electrostatic complexation. The nanoparticles placed under scrutiny are nanoceria (CeO2) coated by short poly(acrylic acid) moieties, whereas the polymers are cationic-neutral block copolymers. The cluster formation was monitored using different formulation pathways, including direct mixing, dialysis, dilution and quenching. In the first process, the hybrids were obtained by mixing stock solutions of polymers and nanoparticles. Dialysis and dilution were based on controlled desalting kinetics according to methods devel…
The fabrication of versatile building blocks that are reliably self-assemble into desired ordered and disordered phases is amongst the hottest topics in contemporary material science. To this end, microscopic units of varying complexity, aimed at assembling the target phases, have been thought, designed, investigated and built. Such a path usually requires laborious fabrication techniques, especially when a specific funcionalisation of the building blocks is required. Telechelic star polymers, i.e., star polymers made of a number $f$ of di-block copolymers consisting of solvophobic and solvoph…
We report the co-assembly and adsorption properties of coacervate complexes made from polyelectrolyte-neutral block copolymers and oppositely charged nanocolloids. The nanocolloids put under scrutiny were ionic surfactant micelles and highly charged 7 nm cerium oxide (CeO2) nanoparticles. Static and dynamic light scattering was used to investigate the microstructure and stability of the organic and hybrid complexes. The microstructure of the CeO2-based complexes was resolved using cryogenic transmission electronic microscopy (Cryo-TEM), and it revealed that the cores were clusters made from de…
