Modern society is increasingly surrounded by, and accustomed to, a wide range of Cyber-Physical Systems (CPS), Internet-of-Things (IoT), and smart devices. They often perform safety-critical functions, e.g., personal medical devices, automotive CPS and industrial automation (smart factories). Some devices are small, cheap and specialized sensors and/or actuators. They tend to run simple software and operate under control of a more sophisticated central control unit. The latter is responsible for the decision-making and orchestrating the entire system. If devices are left unprotected, consequences of forged sensor readings or ignored actuation commands can be catastrophic, particularly, in safety-critical settings. This prompts the following three questions: (1) How to trust data produced by a simple remote embedded device? and (2) How to ascertain that this data was produced via execution of expected software? Furthermore, (3) Is it possible to attain (1) and (2) under the assumption that all software on the remote device could be modified or compromised?
In this paper we answer these questions by designing, proving security of, and formally verifying, VAPE: Verified Architecture for Proofs of Execution. To the best of our knowledge, this is the first of its kind result for low-end embedded systems. Our work has a range of applications, especially, to authenticated sensing and trustworthy actuation, which are increasingly relevant in the context of safety-critical systems. VAPE architecture is publicly available and our evaluation demonstrates that it incurs low overhead, affordable even for lowest-end embedded devices, e.g., those based on MSP430 or ARV ATMega processors.
In this work, we take the first step towards formal verification of Remote Attestation (RA) by designing and verifying an architecture called VRASED: Verifiable Remote Attestation for Simple Embedded Devices. VRASED instantiates a hybrid (HW/SW) RA co-design aimed at low-end embedded systems, e.g., simple IoT devices. VRASED provides a level of security comparable to HW-based approaches, while relying on SW to minimize additional HW costs. Since security properties must be jointly guaranteed by HW and SW, verification is a challenging task, which has never been attempted before in the context …
Remote Attestation (RA) allows a trusted entity (verifier) to securely measure internal state of a remote untrusted hardware platform (prover). RA can be used to establish a static or dynamic root of trust in embedded and cyber-physical systems. It can also be used as a building block for other security services and primitives, such as software updates and patches, verifiable deletion and memory resetting. There are three major classes of RA designs: hardware-based, software-based, and hybrid, each with its own set of benefits and drawbacks. This paper presents the first hybrid RA design, call…
Remote services and applications that users access via their local clients (laptops or desktops) usually assume that, following a successful user authentication at the beginning of the session, all subsequent communication reflects the user's intent. However, this is not true if the adversary gains control of the client and can therefore manipulate what the user sees and what is sent to the remote server. To protect the user's communication with the remote server despite a potentially compromised local client, we propose the concept of continuous visual supervision by a second device equipped …
We live in a time when billions of IoT devices are being deployed and increasingly relied upon. This makes ensuring their availability and recoverability in case of a compromise a paramount goal. The large and rapidly growing number of deployed IoT devices make manual recovery impractical, especially if the devices are dispersed over a large area. Thus, there is a need for a reliable and scalable remote recovery mechanism that works even after attackers have taken full control over devices, possibly misusing them or trying to render them useless. To tackle this problem, we present Lazarus, a s…
To keep a system secure, all devices in the system need to be benign. To avoid malicious and/or compromised devices, network access control such as authentication using a credential and remote attestation based on trusted hardware has been used. These techniques ensure the authenticity and integrity of the devices, but do not mitigate risks of a backdoor embedded in the devices by the developer. To tackle this problem, we propose a novel architecture that integrates remote attestation and backdoor inspection. Specifically, the backdoor inspection result is stored in a server and the verifier r…
We present Phrase-Verified Voting, a voter-verifiable remote voting system assembled from commercial off-the-shelf software for small private elections. The system is transparent and enables each voter to verify that the tally includes their ballot selection without requiring any understanding of cryptography. This paper describes the system and its use in fall 2020, to vote remotely in promotion committees in a university. Each voter fills out a form in the cloud with their vote V (YES, NO, ABSTAIN) and a passphrase P-two words entered by the voter. The system generates a verification prompt …
Remote attestation is a security technique through which a remote trusted party (i.e., Verifier) checks the trustworthiness of a potentially untrusted device (i.e., Prover). In the Internet of Things (IoT) systems, the existing remote attestation protocols propose various approaches to detect the modified software and physical tampering attacks. However, in an interoperable IoT system, in which IoT devices interact autonomously among themselves, an additional problem arises: a compromised IoT service can influence the genuine operation of other invoked service, without changing the software of…
Guaranteeing runtime integrity of embedded system software is an open problem. Trade-offs between security and other priorities (e.g., cost or performance) are inherent, and resolving them is both challenging and important. The proliferation of runtime attacks that introduce malicious code (e.g., by injection) into embedded devices has prompted a range of mitigation techniques. One popular approach is Remote Attestation (RA), whereby a trusted entity (verifier) checks the current software state of an untrusted remote device (prover). RA yields a timely authenticated snapshot of prover state th…
With the rising number of IoT devices, the security of such devices becomes increasingly important. Remote attestation (RA) is a distinct security service that allows a remote verifer to reason about the state of an untrusted remote prover (device). Paradigms of remote attestation span from exclusively software, in software-based attestation, to exclusively hardware-based. In between the extremes are hybrid attestation that utilize the enhanced security of secure hardware components in combination with the lower cost of purely software-based implementations. Traditional remote attestation prot…
We propose Remote Attestation with TOCTOU Avoidance (RATA): a provably secure approach to address the RA TOCTOU problem. With RATA, even malware that erases itself before execution of the next RA, can not hide its ephemeral presence. RATA targets hybrid RA architectures (implemented as Hardware/Software co-designs), which are aimed at low-end embedded devices. We present two alternative techniques - RATAa and RATAb - suitable for devices with and without real-time clocks, respectively. Each is shown to be secure and accompanied by a publicly available and formally verified implementation. Our …
Interconnected embedded devices are increasingly used invarious scenarios, including industrial control, building automation, or emergency communication. As these systems commonly process sensitive information or perform safety critical tasks, they become appealing targets for cyber attacks. A promising technique to remotely verify the safe and secure operation of networked embedded devices is remote attestation. However, existing attestation protocols only protect against software attacks or show very limited scalability. In this paper, we present the first scalable attestation protocol for i…
The design of tiny trust anchors has received significant attention over the past decade, to secure low-end MCU-s that cannot afford expensive security mechanisms. In particular, hardware/software (hybrid) co-designs offer low hardware cost, while retaining similar security guarantees as (more expensive) hardware-based techniques. Hybrid trust anchors support security services, such as remote attestation, proofs of software update/erasure/reset, proofs of remote software execution, in resource-constrained MCU-s, e.g., MSP430 and AVR AtMega32. Despite these advances, detection of control-flow a…
In this paper, we study the security posture of the EV charging ecosystem against a new type of remote that exploits vulnerabilities in the EV charging mobile applications as an attack surface. We leverage a combination of static and dynamic analysis techniques to analyze the security of widely used EV charging mobile applications. Our analysis was performed on 31 of the most widely used mobile applications including their interactions with various components such as cloud management systems. The attack, scenarios that exploit these vulnerabilities were verified on a real-time co-simulation te…
Remote attestation (RA) is a popular means of detecting malware in embedded and IoT devices. RA is usually realized as an interactive protocol, whereby a trusted party -- verifier -- measures integrity of a potentially compromised remote device -- prover. Early work focused on purely software-based and fully hardware-based techniques, neither of which is ideal for low-end devices. More recent results have yielded hybrid (SW/HW) security architectures comprised of a minimal set of features to support efficient and secure RA on low-end devices. All prior RA techniques require on-demand operation…
Remote attestation is an emerging technology for establishing trust in a remote computing system. Copland is a domain-specific language for specifying layered attestation protocols, characterizing attestation-relevant system events, and describing evidence bundling. In this work we formally define and verify a Copland Compiler and Copland Virtual Machine for executing Copland protocols. The compiler translates Copland into instructions that are executed on the virtual machine. The compiler and virtual machine are implemented as monadic, functional programs in the Coq proof assistant and verifi…
Recent IoT applications gradually adapt more complicated end systems with commodity software. Ensuring the runtime integrity of these software is a challenging task for the remote controller or cloud services. Popular enforcement is the runtime remote attestation which requires the end system (prover) to generate evidence for its runtime behavior and a remote trusted verifier to attest the evidence. Control-flow attestation is a kind of runtime attestation that provides diagnoses towards the remote control-flow hijacking at the prover. Most of these attestation approaches focus on small or emb…
There are many well-known techniques to secure sensed data in IoT/CPS systems, e.g., by authenticating communication end-points, encrypting data before transmission, and obfuscating traffic patterns. Such techniques protect sensed data from external adversaries while assuming that the sensing device itself is secure. Meanwhile, both the scale and frequency of IoT-focused attacks are growing. This prompts a natural question: how to protect sensed data even if all software on the device is compromised? Ideally, in order to achieve this, sensed data must be protected from its genesis, i.e., from …
Hardware Security Modules (HSMs) are trusted machines that perform sensitive operations in critical ecosystems. They are usually required by law in financial and government digital services. The most important feature of an HSM is its ability to store sensitive credentials and cryptographic keys inside a tamper-resistant hardware, so that every operation is done internally through a suitable API, and such sensitive data are never exposed outside the device. HSMs are now conveniently provided in the cloud, meaning that the physical machines are remotely hosted by some provider and customers can…
