Due to their great potential in electronics, optoelectronics and piezoelectronics, Janus transition metal dichalcogenide (TMD) monolayers have attracted increasing research interest, the MoSSe of which with sandwiched S-Mo-Se structure has been synthesized experimentally. In this work, the biaxial strain dependence of electronic structures and transport properties of Janus PtSSe monolayer is systematically investigated by using generalized gradient approximation (GGA) plus spin-orbit coupling (SOC). Calculated results show that SOC has a detrimental effect on power factor of PtSSe monolayer, which can be understood by considering SOC effects on energy bands near the Fermi level. With $a/a_0$ from 0.94 to 1.06, the energy band gap firstly increases, and then decreases, which is due to the position change of conduction band minimum (CBM). It is found that compressive strain can increase the strength of conduction bands convergence by changing relative position of conduction band extrema (CBE), which can enhance n-type $ZT_e$ values. Calculated results show that compressive strain can also induce the flat valence bands around the $Γ$ point near the Fermi level, which can lead to high Seebeck coefficient due to large effective masses, giving rise to better p-type $ZT_e$ values. The calculated elastic constants with $a/a_0$ from 0.94 to 1.06 all satisfy the mechanical stability criteria, which proves that the PtSSe monolayer is mechanically stable in the considered strain range. Our works further enrich studies of Janus TMD monolayers, and can motivate farther experimental works.
The discrepancy between the bright theoretical projections for two-dimensional (2D) Janus structures and the lack of experimental realisation of these structures motivated us to study the effect of structural disorder on the stability of MoSSe, SnSSe, PtSSe, In2SSe and GaInSe2. The calculation results demonstrate that the difference between metal-sulfur and metal-selenium bonds makes Janus structures frustrated and less energetically favourable than less ordered allotropes of the same compounds. This result explains the difficulties encountered in experimental fabrication of these materials. I…
The valley degrees of freedom of carriers in crystals is useful to process information and perform logic operations, and it is a key factor for valley application to realize the valley polarization. Here, we propose a model that the valley polarization transition at different valley points (-K and K points) is produced by biaxial strain. By the first-principle calculations, we illustrate our idea with a concrete example of Janus $\mathrm{GdClF}$ monolayer. The predicted $\mathrm{GdClF}$ monolayer is dynamically, mechanically and thermally stable, and is a ferromagnetic (FM) semiconductor with …
Tuning physical properties of transition metal dichalcogenide (TMD) monolayers by strain engineering have most widely studied, and recently Janus TMD monolayer MoSSe has been synthesized. In this work, we systematically study biaxial strain dependence of electronic structures and transport properties of Janus TMD MXY (M = Mo or W, X/Y = S, Se, or Te) monolayer by using generalized gradient approximation (GGA) plus spin-orbit coupling (SOC). It is found that SOC has a noteworthy detrimental influence on power factor in p-type MoSSe, WSSe, n-type WSTe, p-type MoSeTe and WSeTe, and has a negligib…
The compositional as well as structural asymmetries in Janus transition metal dichalcogenides (J-TMDs) and their van der Waals heterostructures (vdW HSs) induce an intrinsic Rashba spin-splitting. We investigate the variation of band-gaps and the Rashba parameter in three different Janus heterostructures having AB-stacked Mo$XY$/W$XY$ ($X$, $Y$ = S, Se, Te; $X\neq Y$) geometry with a $Y-Y$ interface, using first-principles calculations. We consider the effect of external electric field and in-plane biaxial strain in tuning the strength of the intrinsic electric field, which leads to remarkable…
Inspired by the successful synthesis of two-dimensional (2D) V-based Janus dichloride monolayers with intrinsic ferromagnetism and high Curie temperature (T$_{c}$), the electronic structure, spin-valley splitting and magnetic anisotropy of Janus 2H-VSeS monolayers are investigated in detailed using first-principles calculations. The results show that the Janus 2H-VSeS monolayer exhibits a large valley splitting of 105meV, high T$_{c}$ of 278K and good magnetocrystalline anisotropy (0.31meV) contributed by the in-plane d$_{x^{2}-y^{2}}$/d$_{xy}$ orbitals of V atoms. The biaxial strain ($-$8%<$\…
First-principles discovery of stable, anisotropic, semiconducting Sb2X2O (X = S, Se) and Janus Sb2SSeO nanosheets for optoelectronics and photocatalysis
Achieving combination of spin and valley polarized states with topological insulating phase is pregnant to promote the fantastic integration of topological physics, spintronics and valleytronics. In this work, a spin-valley-coupled quantum spin Hall insulator (svc-QSHI) is predicted in Janus monolayer $\mathrm{CSb_{1.5}Bi_{1.5}}$ with dynamic, mechanical and thermal stabilities. The inequivalent valleys have opposite Berry curvature and spin moment, which can produce a spin-valley Hall effect. In the center of Brillouin zone, a Rashba-type spin splitting can be observed due to missing horizont…
Two-dimensional (2D) Janus materials hold a great importance in spintronic and valleytronic applications due to their unique lattice structures and emergent properties. They intrinsically exhibit both an in-plane inversion and out-of-plane mirror symmetry breakings, which offer a new degree of freedom to electrons in the material. One of the main limitations in the multifunctional applications of these materials is, however, that, they are usually non-magnetic in nature. Here, using first-principles calculations, we propose to induce magnetic degree of freedom in non-magnetic WSTe via doping w…
We present first-principles results on the structural, electronic, and magnetic properties of a new family of two-dimensional antiferromagnetic (AFM) manganese chalcogenides, namely monolayer MnX and Janus XMnY (X, Y= S, Se, Te), among which monolayer MnSe was recently synthesized in experiments [\href{https://pubs.acs.org/doi/abs/10.1021/acsnano.1c05532}{ACS Nano 15 (8),13794 (2021)}]. By carrying out calculations of the phonon dispersion and \textit{ab-initio} molecular dynamics simulations, we first confirmed that these systems, characterized by an unconventional strongly coupled bilayer at…
In this computational work based on density functional theory we study the electronic and electron transport properties of asymmetric multi-layer MoSSe junctions, known as Janus junctions. Focusing on 4-layer systems, we investigate the influence of electric field, electrostatic doping, strain, and interlayer stacking on the electronic structure. We discover that a metal to semiconductor transition can be induced by an out-of-plane electric field. The critical electric field for such a transition can be reduced by in-plane biaxial compressive strain. Due to an intrinsic electric field, a 4-lay…
A two-dimensional (2D) material with piezoelectricity, topological and ferromagnetic (FM) orders, namely 2D piezoelectric quantum anomalous hall insulator (PQAHI), may open new opportunities to realize novel physics and applications. Here, by first-principles calculations, a family of 2D Janus monolayer $\mathrm{Fe_2IX}$ (X=Cl and Br) with dynamic, mechanical and thermal stabilities is predict to be room-temperature PQAHI. At the absence of spin-orbit coupling (SOC), monolayer $\mathrm{Fe_2IX}$ (X=Cl and Br) is a half Dirac semimetal state. When the SOC is included, these monolayers become qua…
First-principles calculations on the mechanical, electronic, magnetic and optical properties of two-dimensional Janus Cr$_2$TeX (X= P, As, Sb) monolayers
Recently, great effort has been devoted to the search for two-dimensional (2D) ferromagnetic materials with inherent strong Dzyaloshinskii--Moriya interaction (DMI). Here, through a first-principles approach, we systematically investigate the effect of biaxial strain on the DMI, the Heisenberg exchange interaction, and the magnetic anisotropy energy (MAE) of Janus Cr$_{2}$X$_{3}$Y$_{3}$ (X, Y = Cl, Br, I, X $\neq$ Y) monolayers. Both DMI and MAE can be significantly enhanced by tensile strain, while a reversal of the chirality of DMI in Cr$_{2}$Cl$_{3}$Br$_{3}$ and a switch of MAE from off-pla…
Two-dimensional rare-earth Janus 2$\textit{H}$-Gd$\textit{XY}$ ($\textit{X}$,$\textit{Y}$=Cl, Br, I, $\textit{X}$$\neq$$\textit{Y}$) monolayers: Bipolar ferro-magnetic semiconductors with high Curie temperature and large valley polarization
Recently, the quantum anomalous Hall (QAH) insulators are predicted in Lithium-decorated iron-based superconductor monolayer materials (LiFeX (X=S, Se and Te)) with very high Curie temperature (\textcolor[rgb]{0.00,0.00,1.00}{PRL 125, 086401 (2020)}), which combines the topological and ferromagnetic (FM) orders. It is interesting and useful to achieve coexistence of intrinsic piezoelectricity, ferromagnetism and nontrivial band topology in single two-dimensional (2D) material, namely 2D piezoelectric quantum anomalous hall insulator (PQAHI). In this work, 2D Janus monolayer $\mathrm{Li_2Fe_2SS…
Janus two-dimensional (2D) materials have attracted much attention due to possessing unique properties caused by their out-of-plane asymmetry, which have been achieved in many 2D families. In this work, the Janus monolayers are predicted in new 2D $\mathrm{MA_2Z_4}$ family by means of first-principles calculations, $\mathrm{MoSi_2N_4}$ and $\mathrm{WSi_2N_4}$ of which have been synthesized in experiment(\textcolor[rgb]{0.00,0.00,1.00}{Science 369, 670-674 (2020)}). The predicted $\mathrm{MSiGeN_4}$ (M=Mo and W) monolayers exhibit dynamic, thermodynamical and mechanical stability, and they are …
The realization of multifunctional two-dimensional (2D) materials is fundamentally intriguing, such as combination of piezoelectricity with topological insulating phase or ferromagnetism. In this work, a Janus monolayer $\mathrm{SrAlGaSe_4}$ is built from 2D $\mathrm{MA_2Z_4}$ family with dynamic, mechanical and thermal stabilities, which is piezoelectric due to lacking inversion symmetry. The unstrained $\mathrm{SrAlGaSe_4}$ monolayer is a narrow gap normal insulator (NI) with spin orbital coupling (SOC). However, the NI to topological insulator (TI) phase transition can be induced by the bia…
Coexistence of intrinsic ferromagnetism and piezoelectricity, namely piezoelectric ferromagnetism (PFM), is crucial to advance multifunctional spintronic technologies. In this work, we demonstrate that Janus monolayer YBrI is a PFM, which is dynamically, mechanically and thermally stable. Electronic correlation effects on physical properties of YBrI are investigated by using generalized gradient approximation plus $U$ (GGA+$U$) approach. For out-of-plane magnetic anisotropy, YBrI is a ferrovalley (FV) material, and the valley splitting is larger than 82 meV in considered $U$ range. The anomalo…
For two-dimensional (2D) materials, a pure large out-of-plane piezoelectric response, compatible with the nowadays bottom/top gate technologies, is highly desired. In this work, the piezoelectric properties of penta-graphene (CCC) monolayer are studied with pure out-of-plane piezoelectric effect by density functional theory (DFT). However, the $d_{36}$ is very small, and only -0.065 pm/V. Two strategies are proposed to enhance piezoelectric properties of CCC monolayer. Firstly, both biaxial and uniaxial strains are applied, but the enhancement is very small, and at -2\% biaxial (-4\% uniaxial)…
Photocatalytic water splitting is an effective way to obtain renewable clean energy. The challenge is to design tunable photocatalyst to meet the needs in different environments. At the same time, the oxygen and hydrogen evolution reactions (OER and HER) on the photocatalyst should be separated, which will be conducive to the separation of products. The electronic, optical and photocatalytic properties of Janus X2PAs (X = Si, Ge and Sn) monolayers are explored by first-principles calculation. All the strain-free X2PAs monolayers exhibit excellent photocatalytic properties with suitable band ed…
The combination of piezoelectricity with nontrivial topological insulating phase in two-dimensional (2D) systems, namely piezoelectric quantum spin Hall insulator (PQSHI), is intriguing for exploring novel topological states toward the development of high-speed and dissipationless electronic devices. In this work, we predict a PQSHI Janus monolayer VCClBr constructed from $\mathrm{VCCl_2}$, which is dynamically, mechanically and thermally stable. In the absence of spin orbital coupling (SOC), VCClBr is a narrow gap semiconductor with gap value of 57 meV, which is different from Dirac semimetal…
The combination of piezoelectricity with other unique properties (like topological insulating phase and intrinsic ferromagnetism) in two-dimensional (2D) materials is much worthy of intensive study. In this work, the piezoelectric properties of 2D topological insulators InXO (X=Se and Te) from monolayer InX (X=Se and Te) with double-side oxygen functionalization are studied by density functional theory (DFT). The large piezoelectric strain coefficients (e.g. $d_{11}$=-13.02 pm/V for InSeO and $d_{11}$=-9.64 pm/V for InTeO) are predicted, which are comparable and even higher than ones of many o…
For two-dimensional (2D) material, piezoelectric ferromagnetism (PFM) with large out-of-plane piezoresponse is highly desirable for multifunctional ultrathin piezoelectric device application. Here, we predict that Janus monolayer CrSCl is an out-of-plane ferromagnetic (FM) semiconductor with large vertical piezoelectric response and high Curie temperature. The predicted out-of-plane piezoelectric strain coefficient $d_{31}$ is -1.58 pm/V, which is higher than ones of most 2D materials (compare absolute values of $d_{31}$). The large out-of-plane piezoelectricity is robust against electronic co…
