吸收带热可调谐的水基可重构频率选择吸收器
Water-based Reconfigurable Frequency Selective Rasorber with Thermally Tunable Absorption Band
摘要:
本文提出了一种新型的基于水的可重构微波选频吸收器(FSR),它具有一个高于透射带的可热调谐吸收带。水基FSR由带通型频率选择表面(FSS)和3D打印容器组成。将水基质填充到由上述两种结构构成的密封空间中。数值模拟结果表明,FSR在8.3 ~ 15.2GHz范围内都能实现高吸收率的吸收,并获得5.2 ~ 7.0GHz的传输带宽。在6.14 GHz处,传输带的最小插入损耗为0.72 dB。此外,FSR具有通过填充水或不填充水来吸收或反射电磁波的可重构特性。所提出的水基FSR在不同偏振和倾斜入射角下显示出良好的透射/吸收性能。由于水的德拜模型,吸收带可以通过水温调节,而通带保持稳定。最后,制作了基于水的FSR样机,并给出了实验结果,证明了所提出的结构的有效性。
英文摘要:
In this paper, a novel water-based reconfigurable frequency selective rasorber (FSR) at microwave band is proposed, which has a thermally tunable absorption band above the transmission band. The water-based FSR consists of a bandpass type frequency selective surface (FSS) and a 3D printing container. The water substrate is filled into the sealed space constructed by the above two structures. The numerical simulation results show that the FSR can achieve absorption with high absorptivity from 8.3 to 15.2 GHz, and obtain a transmission band of 5.2 to 7.0 GHz. The minimum insertion loss of the transmission band reaches 0.72 dB at 6.14 GHz. In addition, the FSR has the reconfigurable characteristics of absorbing or reflecting electromagnetic waves by filling with water or not. The proposed water-based FSR shows its good transmission/absorption performance under different polarizations and oblique incident angles. Due to the Debye model of water, the absorption band can be adjusted by water temperature, while the passband remains stable. At last, prototype of the FSR based on water has been fabricated, and the experimental results are presented to demonstrate the validity of the proposed structure.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。