We propose an on-chip Si photonics optical phased array based on a serial grating design which eliminates the use of directional couplers in previous designs. It significantly reduces overall phased array size especially when the number of the antenna is small which is often demanded in practice. The simulation results show our design reduces overall phased array size, increases optical power utilization while maintains comparable far field performance.
Optical phased arrays (OPAs) which beam-steer in 2D have so far been unable to pack emitting elements at $λ/2$ spacing, leading to grating lobes which limit the field-of-view, introduce signal ambiguity, and reduce optical efficiency. Vernier schemes, which use paired transmitter and receiver phased arrays with different periodicity, deliberately misalign the transmission and receive patterns so that only a single pairing of transmit/receive lobes permit a signal to be detected. A pair of OPAs designed to exploit this effect thereby effectively suppress the effects of grating lobes and recover…
We demonstrate an optical phased-array (OPA) equipped with a 3D-printed facet-attached element for shaping and deflection of the emitted beam. The beam shaper combines freeform refractive surfaces with total-internal-reflection (TIR) mirrors and is in-situ printed to edge-emitting waveguide facets using high-resolution multi-photon lithography, thereby ensuring precise alignment with respect to on-chip waveguide structures. In a proof-of-concept experiment, we achieve a grating-lobe free steering range of $\pm 30°$ and a full-width-halfmaximum (FWHM) beam divergence of approximately $2°$. The …
In this paper, we demonstrate a radiation-strength-chirped metasurface centimeter-long grating antenna, whose beam quality is approaching the diffraction limit in its footprint with 90 percent efficiency.Instead of chirping the duty cycle to tune radiation strength, which calls for non-scalable fabrication resolution, we design a 2D fish-bone surface grating with apodized width of the bone.The meta surface is made by silicon nitride on top of silicon waveguide to weakly perturb the mode. Moreover, a Monte Carlo Markov Chain(MCMC) algorithm is implemented to design the radiation strength profil…
Beam steering device such as optical phased array (OPA) is a key component in applications of solid-state Lidar and wireless communication. The traditional single-layer optical phased array (OPA) results in a significant energy loss due to the substrate leakage caused by the downward coupling from the grating coupler structure. In this work we have investigated a structure based on multi-layers Si3N4/SiO2 platform that can form a 3-D OPA to emit the light from the edge of the device with high efficiency, a 2-D converged out-coupling beam will be end-fired to the air. The high efficiency and wi…
A two-dimensional optical-phased array is demonstrated by using a multiple-input star coupler, compatible with FMCW LiDAR. Previous approach using a single-input design achieves two-dimensional beam-steering by relying on a tunable laser source, taking advantage of grating coupler radiation angle wavelength dependance and variation of the waveguide refractive index. While implementing a convenient way to distribute power in a single step, star coupler architecture is inefficient in terms of employed waveguide length and thus, optical loss and footprint. Multi-input approach partially alleviate…
Optical phased arrays (OPAs) implemented in integrated photonic circuits could enable a variety of 3D sensing, imaging, illumination, and ranging applications, and their convergence in new LIDAR technology. However, current integrated OPA approaches do not scale - in control complexity, power consumption, and optical efficiency - to the large aperture sizes needed to support medium to long range LIDAR. We present the serpentine optical phased array (SOPA), a new OPA concept that addresses these fundamental challenges and enables architectures that scale up to large apertures. The SOPA is based…
Compressive sensing has been used to demonstrate scene reconstruction and source localization in a wide variety of devices. To date, optical compressive sensors have not been able to achieve significant volume reduction relative to conventional optics of equivalent angular resolution. Here, we adapt silicon-photonic optical phased array technology to demonstrate, to our knowledge, the first application of compressive imaging in a photonic-integrated device. Our novel sensor consists of an $8\times 8$ grid of grating couplers with a spacing of $100~μ$m. Path-matched waveguides route to a single…
Metasurface antenna arrays, formed by tiling multiple metasurface subapertures, offer an alternative architecture to electrically large beamsteering arrays often used in radar and communications. The advantages offered by metasurfaces are enabled by the use of passive, tunable radiating elements. While these metamaterial elements do not exhibit the full range of phase tuning as can be obtained with phase shifters, they can be engineered to provide a similar level of performance with much lower power requirements and circuit complexity. Due to the limited phase and magnitude control, however, l…
Compact and efficient optical antennas are fundamental components for many applications, including high-density fiber-chip coupling and optical phased arrays. Here we present the design of grating-based micro-antennas with perfectly vertical emission in the 300-nm silicon-on-insulator platform. We leverage a methodology combining adjoint optimization and machine learning dimensionality reduction to efficiently map the multiparameter design space of the antennas, analyse a large number of relevant performance metrics, carry out the required multi-objective optimization, and discover high perfor…
We present the design of a phased, modulated, power distribution network for metasurface array antennas. The specific metasurface array design comprises a series of waveguides, each feeding a sub-array of dynamically tunable metamaterial elements that radiate at microwave (X-band) frequencies. To remain a one-port device, the composite array requires a power divider that can excite each branch waveguide with equal power. Further, the power divider must also apply a prescribed phase shift to each branch waveguide to mitigate metasurface-specific grating lobes. The presented design features holl…
