Due to the increasing dimension, complexity and cost of the future astronomical surveys, new technologies enabling more compact and simpler systems are required. The development of curved detectors allows to enhance the performances of the optical system used (telescope or astronomical instrument), while keeping the system more compact. We describe here a set of five curved CMOS detectors developed within a collaboration between CEA-LETI and CNRS-LAM. These fully-functional detectors 20 Mpix (CMOSIS CMV20000) have been curved to different radii of curvature and spherical shapes (both convex and concave) over a size of 24x32 mm^2. Before being able to use them for astronomical observations, we assess the impact of the curving process on their performances. We perform a full electro-optical characterization of the curved detectors, by measuring the gain, the full well capacity, the dynamic-range and the noise properties, such as dark current, readout noise, pixel-relative-non-uniformity. We repeat the same process for the flat version of the same CMOS sensor, as a reference for comparison. We find no significant difference among most of the characterization values of the curved and flat samples. We obtain values of readout noise of 10e$^-$ for the curved samples compared to the 11e$^-$ of the flat sample, which provides slightly larger dynamic ranges for the curved detectors. Additionally we measure consistently smaller values of dark current compared to the flat CMOS sensor. The curving process for the prototypes shown in this paper does not significantly impact the performances of the detectors. These results represent the first step towards their astronomical implementation.
Many astronomical optical systems have the disadvantage of generating curved focal planes requiring flattening optical elements to project the corrected image on flat detectors. The use of these designs in combination with a classical flat sensor implies an overall degradation of throughput and system performances to obtain the proper corrected image. With the recent development of curved sensor this can be avoided. This new technology has been gathering more and more attention from a very broad community, as the potential applications are multiple: from low-cost commercial to high impact scie…
This work verifies the instrumental characteristics of the CCD detector which is part of the UNI astronomical observatory. We measured the linearity of the CCD detector of the SBIG STXL6303E camera, along with the associated gain and readout noise. The linear response to the incident light of the detector is extremely linear (R2 =99.99%), its effective gain is 1.65 +/- 0.01 e-/ADU and its readout noise is 12.2 e-. These values are in agreement with the manufacturer. We confirm that this detector is extremely precise to make measurements for astronomical purposes.
One of the major challenges of mid-infrared astronomical heterodyne interferometry is its sensitivity limitations. Detectors capable of handling several 10 GHz bandwidths have been identified as key building blocks of future instruments. Intersubband detectors based on heterostructures have recently demonstrated their ability to provide such performances. In this work we characterize a Quantum Well Infrared Photodetector in terms of noise, dynamic range and bandwidth in a non-interferometric heterodyne set-up. We discuss the possibility to use them on astronomical systems to measure the beatin…
In the present paper we consider a family of unobscured telescope designs with curved detectors. They are based on classical two-mirror schemes -- Ritchey-Chretien, Gregorian and Couder telescopes. It is shown that all the designs provide nearly diffraction limited image quality in the visible domain for $.4^\circ \times .4^\circ$ field of view with the f-number of 7. We also provide a brief ghost analysis and point on special features of the systems with curved detectors. Finally, the detector surface shape obtained in each case is analyzed and its' technological feasibility is demonstrated.
Mid-infrared (IR) array detectors have been used for astronomical observations in space. However, the uniformities of their spectral response curves have not been investigated in detail, the understanding of which is important for spectroscopic observations using large array formats. We characterize the spectral responses of all the pixels in IR array detectors using a Fourier transform infrared spectrometer and cryogenic optics for measurements at high signal-to-noise ratios. We measured the spectral responses of the Si:As impurity band conduction (IBC) array, a flight back-up detector for AK…
MAIA, a three-channel imager targeting fast cadence photometry, was recently installed on the Mercator telescope (La Palma, Spain). This instrument observes a 9.4 x 14.1 arcmin field of view simultaneously in three color bands ($u$, $g$ and $r$), using three of the largest (un-) available frame-transfer CCDs, namely the 2k x 6k CCD42-C0 from e2v. As these detectors are housed in three separate cryostats, compact cooling devices are required that offer sufficient power to cool the large chips to a temperature of 165K. We explored a broad spectrum of cooling options and technologies to cool the …
In the present paper we consider quantitative estimation of the tolerances widening in optical systems with curved detectors. The gain in image quality allows to loosen the margins for manufacturing and assembling errors. On another hand, the requirements for the detector shape and positioning become more tight. We demonstrate both of the effects on example of two optical designs. The first one is a rotationally-symmetrical lens with focal length of 25 mm, f-ratio of 3.5 and field of view equal to 72$^\circ$, working in the visible domain. The second design is a three-mirror anastigmat telesco…
We consider using toroidal curved detectors to improve the performance of imaging optical systems. We demonstrate that some optical systems have an anamorphic field curvature. We consider an unobscured re-imaging three-mirror anastigmat as an example (f'=960 mm, F/5.3, FoV 4x4 degrees). By assuming that the image is focused on a toroidal detector surface and perform re-optimization, it becomes possible to obtain a notable gain in the image quality - up to 40 % in terms of the spot RMS radius. Through analytic computations and finite-element analysis, we demonstrate that this toroidal shape can…
BlueMUSE (Blue Multi Unit Spectroscopic Explorer) is a blue-optimised, medium spectral resolution, panoramic integral field spectrograph proposed for the Very Large Telescope (VLT) and based on the MUSE concept. BlueMUSE will open up a new range of galactic and extragalactic science cases allowed by its specific capabilities in the 350 - 580 nm range: an optimised end-to-end transmission down to 350 nm, a larger FoV (up to $1.4 \times 1.4$ arcmin$^2$) sampled at 0.3 arcsec, and a higher spectral resolution ($λ/Δλ\sim 3500$) compared to MUSE. To our knowledge, achieving such capabilities with a…
As astronomical observations from space benefit from improved sensitivity, the effectiveness of scientific programs is becoming limited by systematics that often originate in poorly understood image sensor behavior. Traditional, bottom-up detector characterization methods provide one way to model underlying detector physics, and generate ever more faithful numerical simulations, but this approach is vulnerable to preconceptions and over-simplification. The alternative top-down approach is laboratory emulation, which enables observation, calibration, and analysis scenarios to be tested without …
We present the design of an all-reflective, bi-folded Schmidt telescope aimed at surveys of extended astronomical objects with extremely-low surface brightness. The design leads to a high image quality without any diffracting spider, along with a large aperture and field of view, with a small central obstruction which barely alters the PSF. As an example, we present the design of a high-quality, 36 cm diameter, fast ( f /2.5) telescope working in the visible with a large field of view (1.6°x 2.6°). The telescope can operate with a curved detector (or with a flat detector with a field flattener…
In the recent years a significant progress was achieved in the field of design and fabrication of optical systems based on freeform optical surfaces. They provide a possibility to build fast, wide-angle and high-resolution systems, which are very compact and free of obscuration. However, the field of freeform surfaces design techniques still remains underexplored. In the present paper we use the mathematical apparatus of orthogonal polynomials defined over a square aperture, which was developed before for the tasks of wavefront reconstruction, to describe shape of a mirror surface. Two cases, …
ASTRONIRCAM is an infrared camera-spectrograph installed at the 2.5-meter telescope of the CMO SAI. The instrument is equipped with the HAWAII-2RG array. A bad pixels classification of the ASTRONIRCAM detector is proposed. The classification is based on histograms of the difference of consecutive non-destructive readouts of a flat field. Bad pixels are classified into 5 groups: hot (saturated on the first readout), warm (the signal accumulation rate is above the mean value by more than 5 standard deviations), cold (the rate is under the mean value by more than 5 standard deviations), dead (no …
We present the method of multiplexed imaging designed for astronomical observations of large sky areas in the IR, visible and UV frequencies. Our method relies on the sparse nature of astronomical observations. The method consists of an optical system that directs light from different locations on the focal plane of a telescope onto the same detector area and an algorithm that reconstructs the original wide-field image. In this way we can use a physically small detector to cover a wide field of view. We test our reconstruction algorithm using public space telescope data. Our tests demonstrate …
Optical intensity interferometry, developed in the 1950s, is a simple and inexpensive method for achieving angular resolutions on microarcsecond scales. Its low sensitivity has limited intensity interferometric observations to bright stars so far. Substantial improvements are possible by using avalanche photodiodes (APDs) as light detectors. Several recent experiments used APDs in single-photon detection mode; however, these either provide low electronic bandwidths (few MHz) or require very narrow optical bandpasses. We present here the results of laboratory measurements with a prototype astro…
We present a machine learning based information retrieval system for astronomical observatories that tries to address user defined queries related to an instrument. In the modern instrumentation scenario where heterogeneous systems and talents are simultaneously at work, the ability to supply with the right information helps speeding up the detector maintenance operations. Enhancing the detector uptime leads to increased coincidence observation and improves the likelihood for the detection of astrophysical signals. Besides, such efforts will efficiently disseminate technical knowledge to a wid…
Protons that are trapped in the Earth's magnetic field are one of the main threats to astronomical X-ray observatories. Soft protons, in the range from tens of keV up to a few MeV, impinging on silicon X-ray detectors can lead to a significant degradation of the detector performance. Especially in low earth orbits an enhancement of the soft proton flux has been found. A setup to irradiate detectors with soft protons has been constructed at the Van-de-Graaff accelerator of the Physikalisches Institut of the University of Tübingen. Key advantages are a high flux uniformity over a large area, to …
We have been developing monolithic active pixel sensors series, named "XRPIX," based on the silicon-on-insulator (SOI) pixel technology, for future X-ray astronomical satellites. The XRPIX series offers high coincidence time resolution ({\rm \sim}1 {\rm μ}s), superior readout time ({\rm \sim}10 {\rm μ}s), and a wide energy range (0.5--40 keV). In the previous study, we successfully demonstrated X-ray detection by event-driven readout of XRPIX2b. We here report recent improvements in spectroscopic performance. We successfully increased the gain and reduced the readout noise in XRPIX2b by decrea…
This article presents a novel type of very long baseline astronomical interferometer that uses the fluctuations, as a function of time, of the intensity measured by a quadratic detector, which is a common type of astronomical detector. The theory on which the technique is based is validated by laboratory experiments. Its outstanding principal advantages comes from the fact that the angular structure of an astronomical object is simply determined from the visibility of the minima of the spectrum of the intensity fluctuations measured by the detector, as a function of the frequency of the fluctu…
This paper summarizes the introductory presentation for a workshop that explored the challenges of making precision astronomical measurements using deeply depleted (thick) CCDs. While thick CCDs provide definite advantages in terms of increased quantum efficiency at NIR wavelengths, and reduced fringing from atmospheric emission lines, these devices also exhibit undesirable features that pose a challenge to precision determination of the positions, fluxes, and shapes of astronomical objects, and features in astronomical spectra. Many of the effects seen in these devices arise from lateral elec…
Kinetic inductance detectors (KID) have great potential in astronomical observation, such as searching for exoplanets, because of their low noise, fast response and photon counting characteristics. In this paper, we present the design process and simulation results of a microstrip line coupled KIDs array for near-infrared astronomical observation. Compared with coplanar waveguide (CPW) feedlines, microstrip feedlines do not require air bridges, which simplify fabrication process. In the design part, we mainly focus on the impedance transforming networks, the KID structure, and the frequency cr…
The waveform of a compact binary coalescence is predicted by general relativity. It is therefore possible to directly constrain the response of a gravitational-wave (GW) detector by analyzing a signal's observed amplitude and phase evolution as a function of frequency. GW signals alone constrain the relative amplitude and phase between different frequencies within the same detector and between different detectors. We analyze GW170817's ability to calibrate the LIGO/Virgo detectors, finding a relative amplitude calibration precision of approximately $\pm20\%$ and relative phase precision of $\p…
A substantial amount of important scientific information is contained within astronomical data at the submillimeter and far-infrared (FIR) wavelengths, including information regarding dusty galaxies, galaxy clusters, and star-forming regions; however, these wavelengths are among the least-explored fields in astronomy because of the technological difficulties involved in such research. Over the past 20 years, considerable efforts have been devoted to developing submillimeter- and millimeter-wavelength astronomical instruments and telescopes. The number of detectors is an important property of s…
This paper describes the near-infrared detector system noise generator (NG) that we wrote for the James Webb Space Telescope (JWST) Near Infrared Spectrograph (NIRSpec). NG simulates many important noise components including; (1) white "read noise," (2) residual bias drifts, (3) pink $1/f$ noise, (4) alternating column noise, and (5) picture frame noise. By adjusting the input parameters, NG can simulate noise for Teledyne's H1RG, H2RG, and H4RG detectors with and without Teledyne's SIDECAR ASIC IR array controller. NG can be used as a starting point for simulating astronomical scenes by addin…
For ExAO instruments for the Giant Segmented Mirror Telescopes (GSMTs), alternative architectures of WFS are under consideration because there is a tradeoff between detector size, speed, and noise that reduces the performance of GSMT-ExAO wavefront control. One option under consideration for a GSMT-ExAO wavefront sensor is a three-sided PWFS (3PWFS). The 3PWFS creates three copies of the telescope pupil for wavefront sensing, compared to the conventional four-sided PWFS (4PWFS) which uses four pupils. The 3PWFS uses fewer detector pixels than the 4PWFS and should therefore be less sensitive to…
Due to their high frame rates, high sensitivity, low noise, and low dark current, SAPHIRA detectors provide new capabilities for astronomical observations. The SAPHIRA detector is a 320x256@24 $μ$m pixel HgCdTe linear avalanche photodiode array manufactured by Leonardo. It is sensitive to 0.8-2.5 $μ$m light. Unlike other near-infrared arrays, SAPHIRA features a user-adjustable avalanche gain, which multiplies the photon signal but has minimal impact on the read noise. This enables the equivalent of sub-electron read noise and therefore photon-counting performance, which has not previously been…
Conventional CCD detectors have two major disadvantages: they are slow to read out and they suffer from read noise. These problems combine to make high-speed spectroscopy of faint targets the most demanding of astronomical observations. It is possible to overcome these weaknesses by using electron-multiplying CCDs (EMCCDs). EMCCDs are conventional frame-transfer CCDs, but with an extended serial register containing high-voltage electrodes. An avalanche of secondary electrons is produced as the photon-generated electrons are clocked through this register, resulting in signal amplification that …
BGRem: A background noise remover for astronomical images based on a diffusion model
Radboud University Nijmegen（奈梅亨拉德堡德大学）；Nikhef（荷兰国家核子与粒子物理研究所）；University of Oxford（牛津大学）；University of Nova Gorica（新戈里察大学）；Instituto de Física Corpuscular (IFIC), CSIC-UV（瓦伦西亚-西班牙国家科学研究委员会粒子物理研究所）；University of Cape Town（开普敦大学）；South African Astronomical Observatory（南非天文台）
In recent years, detectors with sub-electron readout noise have been used very effectively in astronomical adaptive optics systems. Here, we compare readout noise models for the two key faint flux level detector technologies that are commonly used: EMCCD and scientific CMOS (sCMOS) detectors. We find that in almost all situations, EMCCD technology is advantageous, and that the commonly used simplified model for EMCCD readout is appropriate. We also find that the commonly used simple models for sCMOS readout noise are optimistic, and recommend that a proper treatment of the sCMOS rms readout no…
Curving X-ray detectors for astrophysics applications
Kavli Institute for Astrophysics and Space Research, Massachusetts Institute of Technology（麻省理工学院卡弗里天体物理学与空间研究学院）；Lincoln Laboratory, Massachusetts Institute of Technology（麻省理工学院林肯实验室）
This Letter of Intent (LoI) describes the outline and plan for the Neutrino Telescope Array (NTA) project. High-energy neutrinos provide unique and indisputable evidence for hadronic acceleration. Recently, IceCube has reported astronomical neutrino candidates in excess of expectation from atmospheric secondaries, but is limited by the water Cherenkov detection method. A next generation high-energy neutrino telescope should be capable of establishing indisputable evidence for cosmic high-energy neutrinos. It should not only have orders-of-magnitude larger sensitivity, but also enough pointing …
The sensitivity of the gravitational-wave detector KAGRA, presently under construction, will be limited by quantum noise in a large fraction of its spectrum. The most promising technique to increase the detector sensitivity is the injection of squeezed states of light, where the squeezing angle is dynamically rotated by a Fabry-Pérot filter cavity. One of the main issues in the filter cavity design and realization is the optical losses due to the mirror surface imperfections. In this work we present a study of the specifications for the mirrors to be used in a 300 m filter cavity for the KAGRA…
Gravitational wave is a propagation of space-time distortion, which is predicted by Einstein in general relativity. Strong gravitational waves will come from some drastic astronomical objects, e.g. coalescence of neutron star binaries, black holes, supernovae, rotating pulsars and pulsar glitches. Detection of the gravitational waves from these objects will open a new door of \textit{`gravitational wave astronomy'}. Gravitational wave will be a probe to study the physics and astrophysics. To search these gravitational waves, large-scale laser interferometers will compose a global network of de…
Optimal Photon Counting with Fast, Low Noise Astronomical Imagers
Stanford University（斯坦福大学）；Kavli Institute for Particle Astrophysics and Cosmology, Stanford University（斯坦福大学粒子天体物理与宇宙学 Kavli 研究所）；Massachusetts Institute of Technology（麻省理工学院）；Kavli Institute for Astrophysics and Space Research, Massachusetts Institute of Technology（麻省理工学院天体物理与空间研究 Kavli 研究所）；The Observatories of the Carnegie Institution for Science（卡内基科学机构天文台）
