We realize a potential platform for an efficient spin-photon interface, namely negatively-charged silicon-vacancy centers in a diamond membrane coupled to the mode of a fully-tunable, fiber-based, optical resonator. We demonstrate that introducing the thin ($\sim 200 \, \text{nm}$), single crystal diamond membrane into the mode of the resonator does not change the cavity properties, which is one of the crucial points for an efficient spin-photon interface. In particular, we observe constantly high Finesse values of up to $3000$ and a linear dispersion in the presence of the membrane. We observe cavity-coupled fluorescence froman ensemble of SiV$^{-}$ centers with an enhancement factor of $\sim 1.9$. Furthermore from our investigations we extract the ensemble absorption and extrapolate an absorption cross section of $(2.9 \, \pm \, 2) \, \cdot \, 10^{-12} \, \text{cm}^{2}$ for a single SiV$^{-}$ center, much higher than previously reported.
We designed a nanoscale light extractor (NLE) for efficient outcoupling and beaming of broadband light emitted by shallow, negatively charged nitrogen-vacancy (NV) centers in bulk diamond. The NLE consists of a patterned silicon layer on diamond and requires no etching of the diamond surface. Our design process is based on adjoint optimization using broadband time-domain simulations and yields structures that are inherently robust to positioning and fabrication errors. Our NLE functions like a transmission antenna for the NV center, enhancing the optical power extracted from an NV center posit…
Phosphorus-doped diamond is relevant for applications in sensing, optoelectronics and quantum photonics, since the unique optical properties of color centers in diamond can be combined with the n-type conductivity attained by the inclusion of phosphorus. Here, we investigate the photoluminescence signal of the nitrogen-vacancy and silicon-vacancy color centers in phosphorus-doped diamond as a function of temperature starting from ambient conditions up to about 100$^\circ$ Celsius, focusing on the zero-phonon line (ZPL). We find that the wavelength and width of the ZPL of the two color centers …
We show that nitrogen-vacancy (NV) centers in diamond can produce a novel quantum hyperbolic metamaterial. We demonstrate that a hyperbolic dispersion relation in diamond with NV centers can be engineered and dynamically tuned by applying a magnetic field. This quantum hyperbolic metamaterial with a tunable window for the negative refraction allows for the construction of a superlens beyond the diffraction limit. In addition to subwavelength imaging, this NV-metamaterial can be used in spontaneous emission enhancement, heat transport and acoustics, analogue cosmology, and lifetime engineering.…
The nitrogen vacancy (NV) center in diamond has emerged as a leading solid-state quantum sensor for applications including magnetometry, electrometry, thermometry, and chemical sensing. However, an outstanding challenge for practical applications is that existing NV-based sensing techniques require bulky and discrete instruments for spin control and detection. Here, we address this challenge by integrating NV based quantum sensing with complementary metal-oxide-semiconductor (CMOS) technology. Through tailored CMOS-integrated microwave generation and photodetection, this work dramatically redu…
The fast development of radio-frequency (RF) technologies increases the need for compact, low consumption and broadband real-time RF spectral analyser. To overcome the electronic bottleneck encountered by electronic solutions, which limits the real time bandwidth to hundreds of MHz, we propose a new approach exploiting the quantum properties of the nitrogen-vacancy (NV) center in diamond. Here we describe a Quantum Diamond Signal Analyser (Q-DiSA) platform and characterize its performances. We successfully detect RF signals over a large tunable frequency range (25 GHz), a wide instantaneous ba…
Single crystal, nanoscale diamond membranes are highly sought after for a variety of applications including nanophotonics, nanoelectronics and quantum information science. However, so far, the availability of conductive diamond membranes remained an unreachable goal. In this work we present a complete nanofabrication methodology for engineering high aspect ratio, electrically active single crystal diamond membranes. The membranes have large lateral directions, exceeding 500x500 um2 and are only several hundreds of nanometers thick. We further realize vertical single crystal p-n junctions, made…
We demonstrate two-dimensional photonic crystal cavities operating at telecommunication wavelengths in a single-crystal diamond membrane. We use a high-optical-quality and thin (~ 300 nm) diamond membrane, supported by a polycrystalline diamond frame, to realize fully suspended two-dimensional photonic crystal cavities with a high theoretical quality factor of ~ $8\times10^6$ and a relatively small mode volume of ~2$(λ/n)^3$. The cavities are fabricated in the membrane using electron-beam lithography and vertical dry etching. We observe cavity resonances over a wide wavelength range spanning t…
Color centers in diamond are widely explored as qubits in quantum technologies. However, challenges remain in the effective and efficient integration of these diamond-hosted qubits in device heterostructures. Here, nanoscale-thick uniform diamond membranes are synthesized via "smart-cut" and isotopically (12C) purified overgrowth. These membranes have tunable thicknesses (demonstrated 50 nm to 250 nm), are deterministically transferable, have bilaterally atomically flat surfaces (Rq <= 0.3 nm), and bulk-diamond-like crystallinity. Color centers are synthesized via both implantation and in-situ…
The controlled creation of color centers in phosphorus-doped (n-type) diamond can facilitate the electronics integration of quantum photonics devices, such as single-photon sources operating upon electrical injection. Silicon vacancy (SiV) color centers are promising candidates, but so far the conditions for single-photon emission in phosphorus-doped diamond have not been investigated. In this study, we create SiV color centers in diamond samples with different phosphorus concentrations and show that the fluorescence background due to doping, nitrogen-impurities and ion implantation induced de…
We operate a fiberbased cavity with an inserted diamond membrane containing ensembles of silicon vacancy centers (SiV$^-$) at cryogenic temperatures $ \geq4~$K. The setup, sample fabrication and spectroscopic characterization is described, together with a demonstration of the cavity influence by the Purcell effect. This paves the way towards solid state qubits coupled to optical interfaces as long-lived quantum memories.
We characterize a high-density sample of negatively charged silicon-vacancy (SiV$^-$) centers in diamond using collinear optical multidimensional coherent spectroscopy. By comparing the results of complementary signal detection schemes, we identify a hidden population of \ce{SiV^-} centers that is not typically observed in photoluminescence, and which exhibits significant spectral inhomogeneity and extended electronic $T_2$ times. The phenomenon is likely caused by strain, indicating a potential mechanism for controlling electric coherence in color-center-based quantum devices.
We demonstrate the super-resolution localization of the nitrogen vacancy centers in diamond by a novel fluorescence photoswitching technique based on coherent quantum control. The photoswitching is realized by the quantum phase encoding based on pulsed magnetic field gradient. Then we perform super-resolution imaging and achieve a localizing accuracy better than 1.4 nm under a scanning confocal microscope. Finally, we show that the quantum phase encoding plays a dominant role on the resolution, and a resolution of 0.15 nm is achievable under our current experimental condition. This method can …
We demonstrate microwave-free eddy-current imaging using nitrogen-vacancy centers in diamond. By detecting the eddy-current induced magnetic field of conductive samples, we can distinguish between different materials and shapes and identify structural defects. Our technique allows for the discrimination of different materials according to their conductivity. The sensitivity of the measurements is calculated as 8$\times 10 ^{5}$\,S/m\,$\sqrt[]{\textrm{Hz}}$ at 3.5\,MHz, for a cylindrical sample with radius $r_0$\,=\,1\,mm and height $h$\,=\,0.1\,mm (volume $\sim$\,0.3\,mm$^3$), at a distance of…
We demonstrate a robust, scale-factor-free vector magnetometer, which uses a closed-loop frequency-locking scheme to simultaneously track Zeeman-split resonance pairs of nitrogen-vacancy (NV) centers in diamond. Compared with open-loop methodologies, this technique is robust against fluctuations in temperature, resonance linewidth, and contrast; offers a three-order-of-magnitude increase in dynamic range; and allows for simultaneous interrogation of multiple transition frequencies. By directly detecting the resonance frequencies of NV centers aligned along each of the diamond's four tetrahedra…
Electrochemically switchable selective membranes play an important role in selective filtration processes such as water desalination, industrial waste treatment and hemodialysis. Currently, membranes for these purposes need to be optimized in terms of electrical conductivity and stability against fouling and corrosion. In this paper, we report the fabrication of boron-doped diamond membrane by template diamond growth on quartz fiber filters. The morphology and quality of the diamond coating are characterized via SEM and Raman spectroscopy. The membrane is heavily boron doped (> 1021 cm-3) with…
Powered by the mutual developments in instrumentation, materials andtheoretical descriptions, sensing and imaging capabilities of quantum emitters insolids have significantly increased in the past two decades. Quantum emitters insolids, whose properties resemble those of atoms and ions, provide alternative waysto probing natural and artificial nanoscopic systems with minimum disturbance andultimate spatial resolution. Among those emerging quantum emitters, the nitrogen-vacancy (NV) color center in diamond is an outstanding example due to its intrinsicproperties at room temperature (highly-lumi…
Efficiently excite nitrogen-vacancy (NV) centers in diamond and collect their fluorescence significantly benefit the fiber-optic-based NV sensors. Here, using a tapered optical fiber (TOF) tip, we significantly improve the efficiency of the laser excitation and fluorescence collection of the NV, thus enhance the sensitivity of the fiber-optic based micron-sized diamond magnetic sensor. Numerical calculation shows that the TOF tip delivers a high numerical aperture (NA) and has a high fluorescence excitation and collection efficiency. Experiments demonstrate that using such TOF tip can obtain u…
Silicon-vacancy (SiV) color centers in diamond have great potential for optical sensing and bio-imaging applications. However, the fabrication of large-scale high-density SiV centers in diamond remains difficult. Here, we report a promising method for the fabrication of high-density SiV- centers in a low-cost polycrystalline diamond film grown on an inches-scale Si wafer. Our method utilizes the nucleation surface of the diamond film which initially interfaces with the Si wafer. Benefited from the diamond seeding substrate of silicon, the nucleation surface has originally been incorporated wit…
The application of imaging techniques based on ensembles of nitrogen-vacancy (NV) sensors in diamond to characterise electrical devices has been proposed, but the compatibility of NV sensing with operational gated devices remains largely unexplored. Here we fabricate graphene field-effect transistors (GFETs) directly on the diamond surface and characterise them via NV microscopy. The current density within the gated graphene is reconstructed from NV magnetometry under both mostly p- and n-type doping, but the exact doping level is found to be affected by the measurements. Additionally, we obse…
