双螺杆挤出机捏合元件中的斜尖改善混合特性
Improving mixing characteristics with a pitched tip in kneading elements in twin-screw extrusion
摘要:
在双螺杆挤出中,混合元件的几何形状主要决定了基本流型,这最终影响混合能力以及混合元件的分散能力。本文讨论了在传统的前向捏合盘元件(FKD)的基础上,采用前向和后向两种倾斜的桨尖,对倾斜桨尖捏合盘元件中的流型和混合特性进行几何修改的效果。采用数值模拟方法,对聚合物熔体在熔体混合区的非等温流动进行了研究,分析了其流型结构和示踪剂轨迹。倾斜的尖端在很大程度上影响盘间流体输送,这是主要负责混合。局部流型的这些变化通过应变率状态的分布来分析。有限时间李雅普诺夫指数的分布揭示了FKD中混合的大的不均匀性被向前和向后的尖端抑制。通过FKD上的向前尖端,与FKD相比,混合能力相对受到抑制,而对于FKD上的向后尖端,混合能力得到增强,同时保持与FKD相同的分散效率水平。从这些结果来看,传统KD上的倾斜尖端在减少混合的不均匀性和调整整体混合性能方面是有效的。
英文摘要:
In twin-screw extrusion, the geometry of a mixing element mainly determines the basic flow pattern, which eventually affects the mixing ability as well as the dispersive ability of the mixing element. The effects of geometrical modification, with both forward and backward pitched tips, of a conventional forwarding kneading disks element (FKD) in the pitched-tip kneading disks element on the flow pattern and mixing characteristics are discussed. Numerical simulations of fully-filled, non-isothermal polymer melt flow in the melt-mixing zone were performed, and the flow pattern structure and the tracer trajectories were investigated. The pitched tips largely affects the inter-disc fluid transport, which is mainly responsible for mixing. These changes in the local flow pattern are analyzed by the distribution of the strain-rate state. The distribution of the finite-time Lyapunov exponent reveals a large inhomogeneity of the mixing in FKD is suppressed both by the forward and backward tips. By the forward tips on FKD, the mixing ability is relatively suppressed compared to FKD, whereas for the backward tips on FKD, the mixing ability is enhanced while maintaining the same level of dispersion efficiency as FKD. From these results, the pitched tips on the conventional KD turns out to be effective at reducing the inhomogeneity of the mixing and tuning the overall mixing performance.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。