arXivDaily arXiv每日学术速递 周一至周五更新
arXiv周末暂无论文更新,休息一下吧,周末愉快~~
arXiv 1004.2273physics.flu-dyn
收藏

同向双螺杆挤出机中新型斜尖捏合机的熔体混合

Melt-Mixing by Novel Pitched-Tip Kneading Disks in a Co-Rotating Twin-Screw Extruder

Yasuya Nakayama, Eiji Takeda, Takashi Shigeishi, Hideki Tomiyama, Toshihisa Kajiwara

摘要:

双螺杆挤出机中的熔融混合是聚合物复合材料开发的关键过程。基于捏合元件内部的物理过程来量化捏合元件的混合性能是一个具有挑战性的问题。我们讨论了熔融混合的新型捏合元件称为“倾斜的尖端捏合盘(ptKD)”。齿盘交错角和齿尖角是ptKD的主要几何参数。我们研究了四种典型的ptKD的安排,这是向前和向后的磁盘交错与向前和向后的提示相结合。在一定的进给量和螺杆转速下进行了数值模拟,并采用拉格朗日统计量对混合过程进行了研究。结果表明,这4种类型的混合特性不同,其混合过程可以用阻力流、错列流、斜尖流和压力流的耦合作用来解释,而这些耦合作用受操作条件的控制。采用倾斜的喷嘴,有效地控制了增压和混合能力的平衡。

英文摘要:

Melt-mixing in twin-screw extruders is a key process in the development of polymer composites. Quantifying the mixing performance of kneading elements based on their internal physical processes is a challenging problem. We discuss melt-mixing by novel kneading elements called "pitched-tip kneading disk (ptKD)". The disk-stagger angle and tip angle are the main geometric parameters of the ptKDs. We investigated four typical arrangements of the ptKDs, which are forward and backward disk-staggers combined with forward and backward tips. Numerical simulations under a certain feed rate and screw revolution speed were performed, and the mixing process was investigated using Lagrangian statistics. It was found that the four types had different mixing characteristics, and their mixing processes were explained by the coupling effect of drag flow with the disk staggering and pitched-tip and pressure flows, which are controlled by operational conditions. The use of a pitched-tip effectively to controls the balance of the pressurization and mixing ability.

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑