arXivDaily arXiv每日学术速递 周一至周五更新
arXiv周末暂无论文更新,休息一下吧,周末愉快~~
arXiv 1805.07529physics.app-ph
收藏

毛细驱动流在圆形微通道内液-气界面位置的理论与数值研究

Theoretical and Numerical Investigation of Liquid-Gas Interface Location of Capillary Driven Flow During the Time Throughout Circular Microchannels

Arshya Bamshad, Alireza Nikfarjam, Mohammad Hossein Sabour, Hassan Raji

摘要:

本研究的主要目的是找到最好的,最快速的,最准确的数值方法来找到液-气界面的毛细驱动流动在圆形微通道内的时间使用COMSOL Multiphysics软件。通过消除微泵或任何物理压力梯度发生器的毛细管驱动流动可以使微流体装置更便宜且更可用。因此,通过使用这种两相流,可以显着降低许多微流体装置和芯片实验室的最终成本,并帮助它们商业化。在这些装置中采用毛细流动的第一步是模拟微通道内的这种流动。COMSOL Multiphysics是这项工作中最常用和最有效的软件之一;这一事实表明了这项研究的重要性。在这项研究中,通过使用该软件中的两种可能的数值方法获得的模拟结果,在两个不同的圆形微通道中的水和乙醇的毛细流动,验证和比较与其他四种方法,实验验证之前。最后,将指定该软件的最准确和最省时的数值方法。该方法可以在COMSOL Multiphysics软件中选择最佳的模拟方法,对由不同机械和电气部件组成的微流控和芯片实验室器件进行模拟。

英文摘要:

The main aim of this study is to find the best, most rapid, and the most accurate numerical method to find the liquid-gas interface of capillary driven flow during the time in circular Microchannels by using COMSOL Multiphysics software. Capillary driven flow by eliminating micropumps or any physical pressure gradient generators can make the microfluidic devices cheaper and more usable. Hence, by using this two-phase flow, the final costs of lots of microfluidic devices and lab-on-a-chip can significantly be decreased and help them to be commercialized. The first step to employing the capillary flow in these devices is the simulation of this flow inside the microchannels. One of the most common and valid software for this work is COMSOL Multiphysics; this fact reveals the importance of this study. In this research study, simulation results obtained by using two possible numerical methods in this software, for capillary flows of water and ethanol in two different circular microchannels, verified and compared with four other methods, which verified experimentally before. Finally, the most accurate and time-saving numerical method of this software will be specified. This appropriate technique can contribute to simulate microfluidic and lab-on-a-chip devices, which are made of different mechanical and electrical parts, in COMSOL Multiphysics software by choosing the best method.

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑