arXivDaily arXiv每日学术速递 周一至周五更新
arXiv 1804.08644physics.app-phcond-mat.mes-hallcond-mat.mtrl-sci
收藏

基于最小残余应力准则的硅-玻璃阳极键合方式的计算与选择

Calculation and selection of silicon to glass anodic bonding modes based on the criterion of minimum residual stress

Leonid S. Sinev

摘要:

这项工作的目标是一个科学合理的选择有效的工艺参数的阳极键合硅玻璃,确保最低水平的残余应力。本论文的相关性是由不断努力减少在电子设备中联合使用不同材料的负面影响所决定的。理论和实践结果:获得了在-100 °C至500 °C温度范围内常用玻璃品牌的热膨胀系数的真实值的温度依赖性;计算了使硅表面上的残余应力最小化的硅和玻璃的厚度比;开发了使硅阳极键合到玻璃中的残余应力最小化的技术。研究结果可应用于MEMS器件的设计和仿真。第一章分析了阳极键合技术应用领域的研究现状。第二章是玻璃线性热膨胀系数随温度变化的实验研究。测量了以下玻璃品牌的热机械性能和组成:LK 5、Schott Borofloat 33、Corning 7740、Hoya SD-2。第三章介绍了硅玻璃键合中残余应力的现有估算模型。两个模型的基础上的理论强度的材料和经典的层压理论与一个额外的温度依赖性的热膨胀系数提出了进一步使用。硅玻璃键的残余应力估计与这些模型和数据从前一章。第四章描述了为证实前几章的观点而进行的实验。所提出的技术,最大限度地减少残余应力描述为设备设计者的步骤。

英文摘要:

The goal of this work is a scientifically justified choice of efficient technological parameters of anodic bonding of silicon to glass, ensuring a minimum level of residual stresses. The relevance of this dissertation is determined by the continuous efforts to reduce the negative effects of the joint use of dissimilar materials in electronic devices. Theoretical and practical results: the temperature dependence of the true values of the coefficient of thermal expansion of popular glass brands in the temperature range from minus 100 °C to 500 °C were obtained; the ratio of thicknesses of silicon and glass that minimizes residual stress on the silicon surface was calculated; the technique of minimizing the residual stresses in silicon anodically bonded to glass was developed. Results of this research are applicable to MEMS devices design and simulations. The first chapter provides the analysis of the current state of research in the field of anodic bonding technology application. The second chapter is devoted to the experimental study of temperature dependence of the linear thermal expansion coefficient of the glass. Thermomechanical properties and composition of the following glass brands: LK5, Schott Borofloat 33, Corning 7740, Hoya SD-2 were measured. The third chapter describes the existing models of estimating the residual stresses in the silicon-glass bonds. Two models based on a theory of strength of materials and the classical lamination theory with an additional temperature dependence of coefficients of thermal expansion are proposed for further use. Residual stresses in silicon-glass bonds are estimated with these models and data from the preceding chapter. The fourth chapter describes the experiments carried out to confirm claims from the previous chapters. The proposed technique of minimizing residual stresses is described as steps for a device designer.

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑