基于相位运动估计和运动放大的风力机叶片振动损伤检测
Vibration-Based Damage Detection in Wind Turbine Blades using Phase-Based Motion Estimation and Motion Magnification
摘要:
基于振动的结构健康监测(SHM)技术是结构损伤识别的最常用方法之一。结构损伤的存在可以通过监测受外部载荷的动态行为的变化来识别,并且通常通过使用实验模态分析(EMA)或操作模态分析(OMA)来执行。这些用于SHM的工具通常需要有限数量的物理连接的换能器(例如加速度计),以便记录结构的响应以用于进一步分析。信号调节器、电线、无线接收器和数据采集系统(DAQ)也是基于振动的SHM中使用的传统传感系统的典型组件。然而,使用接触式传感器(如加速度计)对轻质结构进行检测可能会引起质量加载效应,对于大型结构,检测是劳动密集型和耗时的。实现高空间测量分辨率的大型结构并不总是可行的,而与传统的接触式传感器的工作,也有可能缺乏可靠性与固定的接触式传感器寿命超过主机结构的寿命。在最先进的非接触式测量中,数字摄像机能够从远程结构快速收集高密度的空间信息。本文采用基于相位的运动估计(PME)方法从视频(即一系列图像)中提取出细微的运动信息,并利用提取的信息对2.3m长的Skystream风力发电机叶片(WTB)进行损伤识别。PME和基于相位的运动放大方法从风力涡轮机叶片上的基线和受损测试用例的捕获图像序列估计结构运动。
英文摘要:
Vibration-based Structural Health Monitoring (SHM) techniques are among the most common approaches for structural damage identification. The presence of damage in structures may be identified by monitoring the changes in dynamic behavior subject to external loading, and is typically performed by using experimental modal analysis (EMA) or operational modal analysis (OMA). These tools for SHM normally require a limited number of physically attached transducers (e.g. accelerometers) in order to record the response of the structure for further analysis. Signal conditioners, wires, wireless receivers and a data acquisition system (DAQ) are also typical components of traditional sensing systems used in vibration-based SHM. However, instrumentation of lightweight structures with contact sensors such as accelerometers may induce mass-loading effects, and for large-scale structures, the instrumentation is labor intensive and time consuming. Achieving high spatial measurement resolution for a large-scale structure is not always feasible while working with traditional contact sensors, and there is also the potential for a lack of reliability associated with fixed contact sensors in outliving the life-span of the host structure. Among the state-of-the-art non-contact measurements, digital video cameras are able to rapidly collect high-density spatial information from structures remotely. In this paper, the subtle motions from recorded video (i.e. a sequence of images) are extracted by means of Phase-based Motion Estimation (PME) and the extracted information is used to conduct damage identification on a 2.3-meter long Skystream wind turbine blade (WTB). The PME and phased-based motion magnification approach estimates the structural motion from the captured sequence of images for both a baseline and damaged test cases on a wind turbine blade.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。