While the ongoing search to discover new high-entropy systems is slowly expanding beyond metals, a rational and effective method for predicting "in silico" the solid solution forming ability of multi-component systems remains yet to be developed. In this article, we propose a novel high-throughput approach, called "LTVC", for estimating the transition temperature of a solid solution: ab-initio energies are incorporated into a mean field statistical mechanical model where an order parameter follows the evolution of disorder. The LTVC method is corroborated by Monte Carlo simulations and the results from the current most reliable data for binary, ternary, quaternary and quinary systems (96.6%; 90.7%; 100% and 100%, of correct solid solution predictions, respectively). By scanning through the many thousands of systems available in the AFLOW consortium repository, it is possible to predict a plethora of previously unknown potential quaternary and quinary solid solutions for future experimental validation.
Investigating the grain boundary energies of pure fcc metals and their surface energies obtained from ab initio modeling, we introduce a robust method to estimate the grain boundary energies for complex multicomponent alloys. The input parameter is the surface energy of the alloy, which can easily be accessed by modern ab initio calculations based on density functional theory. The method is demonstrated in the case of paramagnetic Fe-Cr-Ni alloys for which reliable grain boundary data is available.
A density-functional-theory based approach to efficiently compute numerically exact vibrational free energies - including anharmonicity - for chemically complex multicomponent alloys is developed. It is based on a combination of thermodynamic integration and a machine-learning potential. We demonstrate the performance of the approach by computing the anharmonic free energy of the prototypical five-component VNbMoTaW refractory high entropy alloy.
We present a new modeling scheme for ion self-diffusion coefficient, which broadens the applicable scope of ab initio approach. The essential concepts of the scheme are `domain division' and `coarse graining' of the diffusion network based on the barrier energies predicted by the ab initio calculation. The scheme was applied to evaluate Cu ion self-diffusion coefficient in ε-Cu3Sn phase of Cu-Sn alloy, which is a typical system having long-range periodicity. The model constructed with the scheme successfully reproduces the experimental values in a wide temperature range.
We present the ab initio results of the structural and magnetic properties of the Pd host matrix implanted with Fe solute atoms at various concentrations. By means of density functional theory we confirm that iron impurities are able to initialize significant magnetization of the Pd atoms, when the impurity consentation exceeds 3 at.%. Besides, we demonstrate that the imposed magnetization depends on impurity positions in the host matrix, in particular, there is a maximum of magnetization for a uniform distribution of the iron impurity.
Neutron diffraction and ab initio studies were carried out on Mn2V1-xCoxGa (x=0, 0.25, 0.5, 0.75, 1) Heusler alloys which exhibits high TC fully compensated ferrimagnetic characteristic for x=0.5. A combined analysis of neutron diffraction and ab initio calculations revealed the crystal structure and magnetic configuration which could not be determined from the X-ray diffraction and magnetic measurements. As reported earlier, Rietveld refinement of neutron diffraction data confirmed L21 structure for Mn2VGa and Xa structure for Mn2CoGa. The alloys with x=0.25 and 0.5 possess L21 structure with…
The design of corrosion-resistant high entropy alloys (CR-HEAs) is challenging due to the alloys' virtually astrological composition space. To facilitate this, efficient and reliable high-throughput exploratory approaches are needed. Toward this end, the current work reports a first-principles-based approach exploiting the correlations between work function, surface energy, and corrosion resistance (i.e., work function and surface energy are, by definitions, proportional and inversely proportional to an alloy's inherent corrosion resistance, respectively). Two Bayesian CALPHAD models (or datab…
We present a comprehensive first-principles investigation of optical, transport, and thermoelectric properties of pure and doped hexagonal Si$_x$Ge$_{1-x}$ alloys based on density-functional theory calculations, the Boltzmann transport equation, and the generalized quasi-chemical approximation to obtain alloy averages of electronic properties. At low temperature, phase decomposition into the hexagonal elementary crystals is thermodynamically favored, but around and above room temperature random alloys are predicted to be stable. While hexagonal Si has an indirect band gap, the gap of hexagonal…
In this work we developed a practical and general modeling approach for thermal conductivity of metals and metal alloys that integrates ab initio and semiempirical physics-based models to maximize the strengths of both techniques. The approach supports creation of highly accurate, mechanistic, and extensible thermal conductivity modeling of alloys. The model was demonstrated on α-U and U-rich U-Zr and U-Mo alloys, which are potential fuels for advanced nuclear reactors. The safe use of U-based fuels requires quantitative understanding of thermal transport characteristics of the fuel. The model…
Evaluation of microstructure and mechanical property variations in AlxCoCrFeNi high entropy alloys produced by a high-throughput laser deposition method
Since the pioneering efforts of Duwez and coworkers in 1965, when a solid amorphous phase of Pd-Si ($a$-PdSi) was obtained in the vicinity of the eutectic concentration, much work has been done. However, some points related to the atomic structures remain to be systematized. In this work, 8 amorphous Pd$_{100-c}$Si$_{c}$ alloys (c = 2.5, 5, 10, 13.34, 15, 17.5, 20, and 22 at %) were generated by molecular dynamics $ab$ $initio$ simulations; the short-range structure is analyzed using several correlation functions, like Pair Distribution Functions, reduced Pair Distribution Functions, Plane Ang…
In the framework of density functional theory, the structural and magnetic properties of Fe$_{100-x}$Al$_x$ alloys (${5 \leq x \leq 25}$~at.\%) with the different structural order are investigated. Using the Korringa-Kohn-Rostoker Green's function method with a coherent potential approximation, the equilibrium lattice parameters, ground-state energy, and shear moduli for D0$_3$, B2, and A2 structures are calculated. For all structures, the optimized lattice constant increases while the shear modulus demonstrates a decreasing behavior with increasing Al content. The tetragonal magnetostriction …
The effect of Mg content on the natural ageing of Al-Cu-Li-(Mg) alloys has been investigated on a compositionally graded material made by linear friction welding, allowing to probe Mg contents between 0 and 0.4 at.%. High throughput time-and space-resolved characterization of natural ageing kinetics has been achieved using small-angle X-ray scattering, supplemented by differential scanning calorimetry. Natural ageing results mainly in the formation of Cu-rich clusters whose characteristics strongly depend on the presence of Mg. Larger precipitates of 2 nm size also form to a lesser extent abov…
This paper presents a detailed investigation of FeCr-based quaternary Heusler alloys. By using ultrasoft pseudopotential, electronic and magnetic properties of the compounds are studied within the framework of Density Functional Theory (DFT) by using the Quantum Espresso package. The thermodynamic, mechanical, and dynamical stability of the compounds is established through the comprehensive study of different mechanical parameters and phonon dispersion curves. The meticulous study of elastic parameters such as bulk, Young's, shear moduli, etc. is done to understand different mechanical propert…
Body-centered cubic (bcc) Fe-Mn systems are known to exhibit a complex and atypical magnetic behaviour from both experiments and 0 K electronic-structure calculations, which is due to the half-filled 3d-band of Mn. We propose effective interaction models for these alloys, which contain both atomic spin and chemical variables. They were parameterized on a set of key density functional theory (DFT) data, with the inclusion of non-collinear magnetic configurations being indispensable. Two distinct approaches, namely a knowledge-driven and a machine-learning approach have been employed for the fit…
The cubic $Ia\bar{3}$ (BC8) and tetragonal $P4_32_12$ (ST12) high pressure modifications of Si and Ge are attractive candidates for applications in optoelectronic, thermoelectric or plasmonic devices. Si$_x$Ge$_{1-x}$ alloys in BC8/ST12 modifications could help overcome the indirect and narrow band gaps of the pure phases and enable tailoring for specific use-cases. Such alloys have experimentally been found to be stable at ambient conditions after release from high pressure synthesis, however their fundamental properties are not known. In this work, we employ {\it ab initio} calculations base…
Ab initio calculation of structural and electronic properties of Al$_x$Ga$_{1-x}$N and In$_x$Ga$_{1-x}$N alloys
采用密度泛函理论（DFT）和广义梯度近似（GGA）方法，计算了纤锌矿结构的AlN、GAN、InN及其相关合金Al $_x$ Ga $_{1-x}$ N和In $_x$ Ga $_{1-x}$ N的结构和电子性质.我们用全势线性缀加平面波（FP-LAPW）方法进行了精确的{ \it ab initio}总能量计算，研究了结构和电子性质.在这两种合金中，我们发现基本参数不遵循Vegard定律。发现Al $_x$ Ga $_{1-x}$ N合金的晶格参数$a, c,$和$u$表现出向下弯曲，而In $_x$ Ga $_{1-x}$ N的$a$和$c$参数存在向上弯曲，内部参数$u$存在向下弯曲。此外，我们发现，对于这两种合金，带隙值不遵循Vegard定律。作为电子能带计算的副产品，计算了二元化合物及其相关合金的有效质量。我们表明，计算的二元化合物，以及所研究的合金的性能，显示出良好的协议与大多数以前报道的结果。最后，利用冻结声子方法计算了不同体系的A $_1(TO)$模。我们的计算结果显示出良好的协议与实验值报告的二元化合物。对于三元合金，我们的计算再现实验值为Al $_x$ Ga $_{1-x}$ N以及理论预测为In $_x$ Ga $_{1-x}$ N。
Effect of 3d Transition Metal Doping (Mn, Fe, Co, Ni) on the Electronic and Magnetic Properties of Pd Alloys at Low Impurity Concentrations: An Ab initio Study
In traditional body-centered cubic (bcc) metals, the core properties of screw dislocations play a critical role in plastic deformation at low temperatures. Recently, much attention has been focused on refractory high-entropy alloys (RHEAs), which also possess bcc crystal structures. However, unlike face-centered cubic high-entropy alloys (HEAs), there have been far fewer investigations on bcc HEAs, specifically on the possible effects of chemical short-range order (SRO) in these multiple principal element alloys on dislocation mobility. Here, using density functional theory, we investigate the…
In the present work, the aspects of magnetic and structural properties of Ni-Mn-Ga alloys are described in the framework of fist-principles approach and mapped into ternary composition diagrams. The stable atomic arrangement and magnetic alignment for compositions with cubic austenite and tetragonal martensite structures across phase diagrams are predicted. It is shown that Ni- and Ga-rich compositions possess the regular Heusler structure in contrast to Mn-rich compositions with inverse Heusler structure as favorable one. Compositions with unstable austenite structure are concentrated in the …
Lattice parameter, bulk modulus, formation energy and magnetism equilibrium structure in all-d transition metals $Ni_2XMn$ (X=Co,Cr,Fe) for Full and Inverse Heusler structure are studied by first-principles calculations. Tetragonal distortion is calculated for the equilibrium volume of each alloy and possible new equilibrium structures are reported. Density of electronic states are analyzed and the results lead to half-metallicity for this type of alloys.
Determination of the vibrational contribution to the entropy change at the martensitic transformation in Ni-Mn-Sn metamagnetic shape memory alloys: A combined approach of time-of-flight neutron spectroscopy and ab-initio calculations
