arXivDaily arXiv每日学术速递 周一至周五更新
arXiv周末暂无论文更新,休息一下吧,周末愉快~~
arXiv 1707.04304cs.CE
收藏

周期复合结构的多尺度代理建模与不确定性量化

Multiscale Surrogate Modeling and Uncertainty Quantification for Periodic Composite Structures

Charilaos Mylonas, Valentin Bemetz, Eleni Chatzi

摘要:

连续纤维复合材料结构行为的计算建模通常考虑底层微观结构的周期性。一种处理周期性微结构的结构行为的成熟方法是所谓的渐近展开均匀化(AEH)。通过考虑材料位移的周期性扰动,可以导出尺度桥接函数(也称为弹性校正器),以便将宏观结构水平的应变与微观结构应变连接。对于复杂的非均匀微结构,这些函数的推导通常通过PDE问题的数值解来执行-通常使用有限元法。此外,当处理不确定的微观结构的几何形状和材料参数,有相当大的不确定性引入的材料所经历的实际应力。由于计算弹性校正的高计算成本,选择一个纯粹的蒙特卡罗方法来处理不可避免的材料和几何不确定性显然是计算上棘手的。当考虑微尺度损伤的影响时,这个问题甚至更加突出,其中对于每一个发生的损伤都需要重新评估微结构代表性体积元。本文的新颖之处在于,采用了一种非侵入性的替代建模方法,其目的是直接将结构的宏观行为与微观尺度上的材料行为联系起来,从而减少了昂贵的校正函数评估的数量,从而为将来在复合材料结构部件分析中纳入疲劳或静态损伤的发展提供了可能。

英文摘要:

Computational modeling of the structural behavior of continuous fiber composite materials often takes into account the periodicity of the underlying micro-structure. A well established method dealing with the structural behavior of periodic micro-structures is the so- called Asymptotic Expansion Homogenization (AEH). By considering a periodic perturbation of the material displacement, scale bridging functions, also referred to as elastic correctors, can be derived in order to connect the strains at the level of the macro-structure with micro- structural strains. For complicated inhomogeneous micro-structures, the derivation of such functions is usually performed by the numerical solution of a PDE problem - typically with the Finite Element Method. Moreover, when dealing with uncertain micro-structural geometry and material parameters, there is considerable uncertainty introduced in the actual stresses experienced by the materials. Due to the high computational cost of computing the elastic correctors, the choice of a pure Monte-Carlo approach for dealing with the inevitable material and geometric uncertainties is clearly computationally intractable. This problem is even more pronounced when the effect of damage in the micro-scale is considered, where re-evaluation of the micro-structural representative volume element is necessary for every occurring damage. The novelty in this paper is that a non-intrusive surrogate modeling approach is employed with the purpose of directly bridging the macro-scale behavior of the structure with the material behavior in the micro-scale, therefore reducing the number of costly evaluations of corrector functions, allowing for future developments on the incorporation of fatigue or static damage in the analysis of composite structural components.

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑