Pr $_{0.7}$ Ca $_{0.3}$ MnO $_3$基阻性RAM开关瞬态的反应漂移模型
Reaction-Drift Model for Switching Transients in Pr$_{0.7}$Ca$_{0.3}$MnO$_3$ Based Resistive RAM
摘要:
早些时候,通过漂移扩散(DD)(包括TCAD中的自加热(SH))(但没有离子传输)对PCMO RRAM进行直流空穴电流建模,能够解释在电阻开关之前实验观察到的SCLC特性。此外,使用DD+SH模型的瞬态分析能够再现在电阻切换之前在约100 ns时间尺度下实验观察到的快速电流增加,随后是饱和增加。然而,阻变需要包括离子传输。我们提出了一个反应漂移(RD)模型的氧化物离子,这是结合DD+SH模型。在实验上,SET操作由3个阶段组成,而SET操作由4个阶段组成。DD+SH+RD模型能够在一定范围的偏置、温度下,在10 $^{-8}$-1 s的时间尺度范围内再现SET和RESET操作的整个瞬态行为。值得注意的是,再现了$log(I)\propto m*log(t)$的普遍的聚合行为,其中$m\approx -1/10$。定量不同的电压时间的困境,设置和浪涌也复制了一系列的环境温度。这展示了基于PCMO的RRAM中的电阻切换的综合模型。
英文摘要:
Earlier, the DC hole-current modeling of PCMO RRAM by drift-diffusion (DD) including self-heating (SH) in TCAD (but without ionic transport) was able to explain the experimentally observed SCLC characteristics, prior to resistive switching. Further, transient analysis using DD+SH model was able to reproduce the experimentally observed fast current increase at ~100ns timescale followed by saturation increases, prior to resistive switching. However, resistive switching requires the inclusion of ionic transport. We propose a Reaction-Drift (RD) model of oxide ions, which is combined with the DD+SH model. Experimentally, SET operations consist of 3 stages and RESET operations consists of 4 stages. The DD+SH+RD model is able to reproduce the entire transient behavior over 10$^{-8}$-1s range in timescale for both SET and RESET operations for a range of bias, temperature. Remarkably, a universal RESET behaviour of $log(I)\propto m*log(t)$, where $m\approx -1/10$, is reproduced. The quantitatively different voltage time dilemma for SET and RESET is also replicated for a range of ambient temperature. This demonstrates a comprehensive model for resistance switching in PCMO based RRAM.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。