arXivDaily arXiv每日学术速递 周一至周五更新
arXiv周末暂无论文更新,休息一下吧,周末愉快~~
arXiv 1612.01749cs.ITmath.IT
收藏

FoCUS:基于傅立叶编码的超声

FoCUS: Fourier-based Coded Ultrasound

Almog Lahav, Tanya Chernyakova, Yonina C. Eldar

摘要:

现代成像系统通常使用单载波短脉冲用于换能器激励。编码信号与脉冲压缩一起成功地用于雷达和通信,以增加传输的能量。先前的研究证实,编码信号的超声成像在信噪比和成像深度方面有显著改善。由于需要在每个换能器元件处施加脉冲压缩,因此在阵列成像中实现编码激励(CE)在计算上是复杂的。在波束形成器输出上应用脉冲压缩减少了计算负载,但也降低了轴向和横向点扩散函数(PSF),从而损害图像质量。在这项工作中,我们提出了一种有效的实施脉冲压缩的方法,将其集成到频域波束形成。该方法在不影响轴向分辨率的情况下,显著减少了计算量。横向分辨率取决于计算负荷的节省因子。我们验证了我们的方法在Verasonics成像系统上的性能,并将所得图像与时域处理进行比较。我们表明,高达77倍的减少计算复杂性可以实现在一个典型的成像设置。该算法的有效实现为提高阵列成像的信噪比、成像深度和帧频提供了一种可行的方法。

英文摘要:

Modern imaging systems typically use single-carrier short pulses for transducer excitation. Coded signals together with pulse compression are successfully used in radar and communication to increase the amount of transmitted energy. Previous research verified significant improvement in SNR and imaging depth for ultrasound imaging with coded signals. Since pulse compression needs to be applied at each transducer element, the implementation of coded excitation (CE) in array imaging is computationally complex. Applying pulse compression on the beamformer output reduces the computational load but also degrades both the axial and lateral point spread function (PSF) compromising image quality. In this work we present an approach for efficient implementation of pulse compression by integrating it into frequency domain beamforming. This method leads to significant reduction in the amount of computations without affecting axial resolution. The lateral resolution is dictated by the factor of savings in computational load. We verify the performance of our method on a Verasonics imaging system and compare the resulting images to time-domain processing. We show that up to 77 fold reduction in computational complexity can be achieved in a typical imaging setups. The efficient implementation makes CE a feasible approach in array imaging paving the way to enhanced SNR as well as improved imaging depth and frame-rate.

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑