We demonstrate an original method -- based on controlled oxidation -- to create high-quality tunnel junctions between superconducting Al reservoirs and InAs semiconductor nanowires. We show clean tunnel characteristics with a current suppression by over $4$ orders of magnitude for a junction bias well below the Al gap $Δ_0 \approx 200\,μ{\rm eV}$. The experimental data are in close agreement with the BCS theoretical expectations of a superconducting tunnel junction. The studied devices combine small-scale tunnel contacts working as thermometers as well as larger electrodes that provide a proof-of-principle active {\em cooling} of the electron distribution in the nanowire. A peak refrigeration of about $δT = 10\,{\rm mK}$ is achieved at a bath temperature $T_{bath}\approx250-350\,{\rm mK}$ in our prototype devices. This method opens important perspectives for the investigation of thermoelectric effects in semiconductor nanostructures and for nanoscale refrigeration.
We apply noise thermometry to characterize charge and thermoelectric transport in single InAs nanowires (NWs) at a bath temperature of 4.2 K. Shot noise measurements identify elastic diffusive transport in our NWs with negligible electron-phonon interaction. This enables us to set up a measurement of the diffusion thermopower. Unlike in previous approaches, we make use of a primary electronic noise thermometry to calibrate a thermal bias across the NW. In particular, this enables us to apply a contact heating scheme, which is much more efficient in creating the thermal bias as compared to conv…
We have studied thermal gradients in thin Cu and AlMn wires, both experimentally and theoretically. In the experiments, the wires were Joule heated non-uniformly at sub-Kelvin temperatures, and the resulting temperature gradients were measured using normal metal-insulator-superconducting tunnel junctions. The data clearly shows that even in reasonably well conducting thin wires with a short ($\sim 10 μ$m) non-heated portion, significant temperature differences can form. In most cases, the measurements agree well with a model which includes electron-phonon interaction and electronic thermal con…
We describe the concept and experimental demonstration of primary thermometry based on a four probe measurement of a single tunnel junction embedded within four arrays of junctions. We show that in this configuration random sample specific and environment-related errors can be avoided. This method relates temperature directly to Boltzmann constant, which will form the basis of the definition of temperature and realization of official temperature scales in the future.
The impact of junction transparency in driving phase-coherent charge transfer across diffusive semiconductor-superconductor junctions is demonstrated. We present conductivity data for a set of Nb-InAs junctions differing only in interface transparency. Our experimental findings are analyzed within the quasi-classical Green-function approach and unambiguously show the physical processes giving rise to the observed excess zero-bias conductivity.
We have fabricated superconductor-quantum dot-superconductor (SC-QD-SC) junctions by using SC aluminum electrodes with narrow gaps laterally contacting a single self-assembled InAs QD. The fabricated junctions exhibited clear Coulomb staircases and Coulomb oscillations at 40 mK. Furthermore, clear suppression in conductance was observed for the source-drain voltage $|V_{\rm SD}| < 2Δ/e$, where $Δ$ is the SC energy gap of Al. The absence of Josephson current that flows through QDs is due to the strong Coulomb interaction and non-negligible thermal fluctuation in our measurement system.
We report on fabrication of single-electron transistors using InAs nanowires with epitaxial aluminium with fixed tunnel barriers made of aluminium oxide. The devices exhibit a hard superconducting gap induced by the proximized aluminium cover shell and they behave as metallic single-electron transistors. In contrast to the typical few channel contacts in semiconducting devices, our approach forms opaque multichannel contacts to a semiconducting wire and thus provides a complementary way to study them. In addition, we confirm that unwanted extra quantum dots can appear at the surface of the nan…
We have investigated theoretically the effects of the charging energy to the normal metal--insulator--superconductor (NIS) tunnel junction used as a thermometer. We demonstrate by numerical calculations how the charging effects modify NIS thermometry, and how the voltage--to--temperature response and the responsivity $|dV/dT|$ of a current biased thermometer are affected. In addition, we show that the responsivity of the thermometer can be modulated with an additional gate electrode. The maximum responsivity is achieved when the Coulomb blockade is maximal, i.e. with a closed gate.
We have measured current-voltage characteristics of two-dimensional arrays of small tunnel junctions at temperatures from 1.5 K to 4.2 K. This corresponds to thermal energies larger than the charging energy. We show that 2D-arrays can be used as primary thermometers in the same way as 1D-arrays, and even have some advantages over 1D-arrays. We have carried out Monte Carlo simulations, which agree with our experimental results.
Using self-consistent quantum transport simulation on realistic devices, we show that InAs band-to-band Tunneling Field Effect Transistors (TFET) with a heavily doped pocket in the gate-source overlap region can offer larger ON current and steeper subthreshold swing as compared to conventional tunneling transistors. This is due to an additional tunneling contribution to current stemming from band overlap along the body thickness. However, a critical thickness is necessary to obtain this advantage derived from 'vertical' tunneling. In addition, in ultra small InAs TFET devices, the subthreshold…
We have investigated one and two dimensional (1D and 2D) arrays of tunnel junctions in partial Coulomb blockade regime. The absolute accuracy of the Coulomb blockade thermometer is influenced by the external impedance of the array, which is not the same in the different topologies of 1D and 2D arrays. We demonstrate, both by experiment and by theoretical calculations in simple geometries, that the 1D structures are better in this respect. Yet in both 1D and 2D, the influence of the environment can be made arbitrarily small by making the array sufficiently large.
We present a simple on-chip electronic thermometer with the potential to operate down to 1 mK. It is based on transport through a single normal-metal - superconductor tunnel junction with rapidly widening leads. The current through the junction is determined by the temperature of the normal electrode that is efficiently thermalized to the phonon bath, and it is virtually insensitive to the temperature of the superconductor, even when the latter is relatively far from equilibrium. We demonstrate here the operation of the device down to 7 mK and present a systematic thermal analysis.
Tunneling spectroscopy of InAs nanocrystals deposited on graphite was measured using scanning tunneling microscopy, in a double-barrier tunnel-junction configuration. The effect of the junction symmetry on the tunneling spectra is studied experimentally and modeled theoretically. When the tip is retracted, we observe resonant tunneling through the nanocrystal states without charging. This is in contrast to previous measurements on similar nanocrystals anchored to gold by linker molecules, where charging took place. Charging is regained upon reducing the tip-nanocrystal distance, making the jun…
With downscaling of electronic circuits, components based on semiconductor quantum dots are assuming increasing relevance for future technologies. Their response under external stimuli intrinsically depend on their quantum properties. Here we investigate single-electron tunneling in hard-wall InAs/InP nanowires in the presence of an off-resonant microwave drive. Our heterostructured nanowires include InAs quantum dots (QDs) and exhibit different tunnel-current regimes. In particular, for source-drain bias up to few mV Coulomb diamonds spread with increasing contrast as a function of microwave …
GaSb/InAs heterojunction tunnel field-effect transistors are strong candidates in building future low-power integrated circuits, as they could provide both steep subthreshold swing and large ON-state current ($I_{\rm{ON}}$). However, at short channel lengths they suffer from large tunneling leakage originating from the small band gap and small effective masses of the InAs channel. As proposed in this article, this problem can be significantly mitigated by reducing the channel thickness meanwhile retaining a thick source-channel tunnel junction, thus forming a design with a non-uniform body thi…
We report measurements of the nonlinear conductance of InAs nanowire quantum dots coupled to superconducting leads. We observe a clear alternation between odd and even occupation of the dot, with sub-gap-peaks at $|V_{sd}|=Δ/e$ markedly stronger(weaker) than the quasiparticle tunneling peaks at $|V_{sd}|=2Δ/e$ for odd(even) occupation. We attribute the enhanced $Δ$-peak to an interplay between Kondo-correlations and Andreev tunneling in dots with an odd number of spins, and substantiate this interpretation by a poor man's scaling analysis.
We present a comprehensive electrical characterization of an InAs/InP nanowire heterostructure, comprising two InP barriers forming a quantum dot (QD), two adjacent lead segments (LSs) and two metallic contacts, and demonstrate how to extract valuable quantitative information of the QD. The QD shows very regular Coulomb blockade (CB) resonances over a large gate voltage range. By analyzing the resonance line shapes, we map the evolution of the tunnel couplings from the few to the many electron regime, with electrically tunable tunnel couplings from <1 $μ$eV to >600 $μ$eV, and a transition from…
We have investigated electrical spin injection from Ni81Fe19 into an InAs quantum well through MgO tunneling barrier for potential application to InAs-based spin field effect transistor. Injected spin polarized current were detected in both nonlocal and local spin valve set-ups and the spin diffusion length and spin injection efficiency were analyzed. The spin diffusion length was estimated to be 1.6 μm in nonlocal set-up at 1.4 K. The spin polarization of Ni81Fe19/MgO/InAs as-deposited sample was relealed to be 6.9 %, while increased spin polarization of 8.9 % was observed by additional therm…
We investigate a wafer scale tunnel junction fabrication method, where a plasma etched via through a dielectric layer covering bottom Al electrode defines the tunnel junction area. The ex-situ tunnel barrier is formed by oxidation of the bottom electrode in the junction area. Room temperature resistance mapping over a 150 mm wafer give local deviation values of the tunnel junction resistance that fall below 7.5 % with an average of 1.3 %. The deviation is further investigated by sub-1 K measurements of a device, which has one tunnel junction connected to four arrays consisting of N junctions (…
We report on linewidth analysis of optical transitions in InAs/GaAs coupled quantum dots as a function of bias voltage, temperature, and tunnel coupling strength. A significant line broadening up to 100 $μ$eV is observed at hole tunneling resonances where the coherent tunnel coupling between spatially direct and indirect exciton states is maximized, corresponding to a phonon-assisted transition rate of 150 ns${}^{-1}$ at 20 K. With increasing temperature, the linewidth shows broadening characteristic of single-phonon transitions. The linewidth as a function of tunnel coupling strength tracks t…
We have successfully fabricated micron-scale Cu-AlO$_{x} $-Al-NbN normal metal-insulator-superconductor (NIS) tunnel junction devices, using pulsed laser deposition (PLD) for NbN film growth, and electron-beam lithography and shadow evaporation for the final device fabrication. The subgap conductance of these devices exhibit a strong temperature dependence, rendering them suitable for thermometry from $\sim$ 0.1 K all the way up to the superconducting transition temperature of the NbN layer, which was here $\sim 11$ K, but could be extended up to $\sim 16$ K in our PLD chamber. Our data fits w…
Indium arsenide nanowires grown by selective-area vapor phase epitaxy are used as tips for scanning tunneling microscopy (STM). The STM tips are realized by positioning the wires manually on the corner of a double cleaved gallium arsenide wafer with submicrometer precision and contacting them lithographically, which is fully compatible with further integrated circuitry on the GaAs wafer. STM images show a z-noise of 2 pm and a lateral stability of, at least, 0.5 nm on a Au(111) surface. I(z) spectroscopy reveals an exponential decay indicating tunneling through vacuum. Subsequent electron micr…
The electrical performance of a tunnel field-effect transistor depends critically on the band offset at their semiconductor heterojunction interface. Historically, it has been difficult to experimentally determine how the electronic bands align at the heterojunction interface. We report here on experimental methods to ascertain a complete energy band alignment of a broken-gap tunnel field-effect transistor based on an InAs/GaSb hetero-junction. By using graphene as an optically transparent electrode in a traditional internal photoemission measurement, both the electron and hole barrier heights…
We report results on the control of barrier transparency in InAs/InP nanowire quantum dots via the electrostatic control of the device electron states. Recent works demonstrated that barrier transparency in this class of devices displays a general trend just depending on the total orbital energy of the trapped electrons. We show that a qualitatively different regime is observed at relatively low filling numbers, where tunneling rates are rather controlled by the axial configuration of the electron orbital. Transmission rates versus filling are further modified by acting on the radial configura…
We use simultaneous electronic transport and optical characterization measurements to reveal new information about electronic and optical processes in nanoscale junctions fabricated by electromigration. Comparing electronic tunneling and photocurrents allows us to infer the optical frequency potential difference produced by the plasmon response of the junction. Together with the measured tunneling conductance, we can then determine the locally enhanced electric field within the junction. In similar structures containing molecules, anti-Stokes and Stokes Raman emission allow us to infer the eff…
The charge character of Andreev bound states (ABSs) in a three-terminal semiconductor-superconductor hybrid nanowire was measured using local and nonlocal tunneling spectroscopy. The device is fabricated using an epitaxial InAs/Al two-dimensional heterostructure with several gate-defined side probes. ABSs are found to oscillate around zero as a function of gate voltage, with modifications of their charge consistent with theoretical expectations for the total Bardeen-Cooper- Schrieffer (BCS) charge of ABSs.
Temperature is a fundamental parameter in the study of physical phenomena. At the nanoscale, local temperature differences can be harnessed to design novel thermal nanoelectronic devices or test quantum thermodynamical concepts. Determining temperature locally is hence of particular relevance. Here, we present a primary electron thermometer that allows probing the local temperature of a single electron reservoir in single-electron devices. The thermometer is based on cyclic electron tunneling between a system with discrete energy levels and a single electron reservoir. When driven at a finite …
We investigate temperature errors of Coulomb blockade thermometer (CBT) arising from inevitable non-uniformities in tunnel junction arrays. The errors are proportional to the junction resistance variance in the universal operation regime and this result holds approximately also beyond this originally studied high temperature range. We present both analytical and numerical results, and discuss briefly their implications on achievable uniformity based on state-of-the-art fabrication of sensors.
Half a century ago Brian Josephson made a series of striking predictions related to a tunnelling barrier sandwiched between two superconductors. One particular prediction, later became known as the a.c.-Josephson effect, said that under a finite d.c. bias the tunnelling current contains an a.c. supercurrent component, oscillating at microwave frequency. This prediction was experimentally verified through observation of the junction current-voltage characteristics modified by the interaction with the electromagnetic radiation, and direct detection of the microwave radiation emitted from the jun…
We report the occurrence of the zero-bias conductance peak (ZBCP) in an InAs nanowire coupled to PbIn superconductors with varying temperature, bias voltage, and magnetic field. The ZBCP is suppressed with increasing temperature and bias voltage above the Thouless energy of the nanowire. Applying a magnetic field also diminishes the ZBCP when the resultant magnetic flux reaches the magnetic flux quantum h/2e. Our observations are consistent with theoretical expectations of reflectionless tunneling, in which the phase coherence between an electron and its Andreev-reflected hole induces the ZBCP…
We report on large thermoelectric effects in superconductor-ferromagnet tunnel junctions in proximity contact with the ferromagnetic insulator europium sulfide. The combination of a spin-splitting field and spin-polarized tunnel conductance in these systems breaks the electron-hole symmetry and leads to spin-dependent thermoelectric currents. We show that the exchange splitting induced by the europium sulfide boosts the thermoelectric effect in small applied fields and can therefore eliminate the need to apply large magnetic fields, which might otherwise impede applications in thermometry or c…
We measure the non-dissipative supercurrent in a single InAs self-assembled quantum dot (QD) coupled to superconducting leads. The QD occupation is both tuned by a back-gate electrode and lateral side-gate. The geometry of the side-gate allows tuning of the QD-lead tunnel coupling in a region of constant electron number with appropriate orbital state. Using the side-gate effect we study the competition between Kondo correlations and superconducting pairing on the QD, observing a decrease in the supercurrent when the Kondo temperature is reduced below the superconducting energy gap in qualitati…
InAs/GaSb and similar materials systems have generated great interest as a heterojunction for tunnel field effect transistors (TFETs) due to favorable band alignment. However, little is currently understood about how such TFETs are affected by materials defects and nonidealities. We present measurements of the conductance slope for various InAs/GaSb heterojunctions via two-terminal electrical measurements, which removes three-terminal parasitics and enables direct study on the effect of microstructure on tunnelling. Using this, we can predict how subthreshold swings in TFETs can depend on micr…
Using a tight-binding mode-space NEGF technique, we explore the essential physics, design and performance potential of the III-V core-shell (CS) nanowire (NW) heterojunction TFET. The CS TFET line-tunneling current increases significantly with the core diameter $d_{C}$ and outperforms the best III-V axial point-tunneling NW heterojunction TFET $I_{ON}$ by up to 6x for $d_{C}$ = 6.6 nm. Reaching such a high level of current at low supply voltage, however, requires and involves specific and sometime unanticipated optimizations and physics that are thoroughly investigated here. In spite of the co…
We have fabricated a lateral double barrier magnetic tunnel junction (MTJ) which consists of a single self-assembled InAs quantum dot (QD) with ferromagnetic Co leads. The MTJ shows clear hysteretic tunnel magnetoresistance (TMR) effect, which is evidence for spin transport through a single semiconductor QD. The TMR ratio and the curve shapes are varied by changing the gate voltage.
Bound states in superconductor-nanowire hybrid devices play a central role, carrying informationon the ground states properties (Shiba or Andreev states) or on the topological properties of thesystem (Majorana states). The spectroscopy of such bound states relies on the formation of well-defined tunnel barriers, usually defined by gate electrodes, which results in smooth tunnel barriers.Here we used thin InP segments embedded into InAs nanowire during the growth process to forma sharp built-in tunnel barrier. Gate dependence and thermal activation measurements have beenused to confirm the pres…
The properties of InAs (110) surfaces have been investigated by means of low-temperature scanning tunneling microscopy and spectroscopy. A technique for ex-situ sulphur passivation has been developed to form an accumulation layer on such a surface. Tunneling spectroscopy at 4.2 K shows the presence of 2D subbands in the accumulation layer. Measurements in high-magnetic field demonstrate Landau quantization of the energy spectrum, both in the 2D subbands and the 3D bulk conduction band.
In the current paper a set of experiments dedicated to investigations of local electronic transport in undoped InAs nanowires at helium temperatures in the presence of a charged atomic-force microscope tip is presented. Both nanowires without defects and with internal tunneling barriers were studied. The measurements were performed at various carrier concentrations in the systems and opacity of contact-to-wire interfaces. The regime of Coulomb blockade is investigated in detail including negative differential conductivity of the whole system. The situation with open contacts with one tunneling…
Dispersive sensing is a powerful technique that enables scalable and high-fidelity readout of solid-state quantum bits. In particular, gate-based dispersive sensing has been proposed as the readout mechanism for future topological qubits, which can be measured by single electrons tunneling through zero-energy modes. The development of such a readout requires resolving the coherent charge tunneling amplitude from a quantum dot in a Majorana-zero-mode host system faithfully on short time scales. Here, we demonstrate rapid single-shot detection of a coherent single-electron tunneling amplitude be…
Implementing superconductors capable of proximity-inducing a large energy-gap in semiconductors in the presence of strong magnetic fields is a major goal towards applications of semiconductor/superconductor hybrid materials in future quantum information technologies. Here, we study the performance of devices consisting of InAs nanowires in electrical contact to molybdenum-rhenium (MoRe) superconducting alloys. The MoRe thin films exhibit transition temperatures ~10 K and critical fields exceeding 6 T. Normal/superconductor devices enabled tunnel spectroscopy of the corresponding induced superc…
Tunneling of electrons through the barriers in heterostructures devices is investigated by using the unified Transfer Matrix Method. The effect of barrier width on electron transmission coefficients has also been examined for different pairs of semiconductor devices of significant research interest in current years. Such Pairs involve AlxGa1-xAs/GaAs, AlSb/InAs, and CdS/CdSe quantum barriers with varying dimensions reduced from 20 nm to 5nm to observe how tunneling properties are affected by scaling. The effective electron masses in the well and barrier regions typically vary with constituent …
The results of experimental and theoretical studies of zero-bias anomaly (ZBA) in the Pb-oxide-n-InAs tunnel structures in magnetic field up to 6T are presented. A specific feature of the structures is a coexistence of the 2D and 3D states at the Fermi energy near the semiconductor surface. The dependence of the measured ZBA amplitude on the strength and orientation of the applied magnetic field is in agreement with the proposed theoretical model. According to this model, electrons tunnel into 2D states, and move diffusively in the 2D layer, whereas the main contribution to the screening comes…
Dispersive charge sensing is realized in hybrid semiconductor-superconductor nanowires in gate-defined single- and double-island device geometries. Signal-to-noise ratios (SNRs) were measured both in the frequency and time domain. Frequency-domain measurements were carried out as a function of frequency and power and yield a charge sensitivity of $1 \times 10^{-3} e/\sqrt{\rm Hz}$ for an 11 MHz measurement bandwidth. Time-domain measurements yield SNR > 1 for 20 $μ$s integration time. At zero magnetic field, photon-assisted tunneling was detected dispersively in a double-island geometry, indic…
We combine electron beam lithography and masked anodization of epitaxial aluminium to define tunnel junctions via selective oxidation, alleviating the need for wet-etch processing or direct deposition of dielectric materials. Applying this technique to define Josephson junctions in proximity induced superconducting Al-InAs heterostructures, we observe multiple Andreev reflections in transport experiments, indicative of a high quality junction. We further compare the mobility and density of Hall-bars defined via wet etching and anodization. These results may find utility in uncovering new fabri…
We demonstrate radiofrequency thermometry on a micrometer-sized metallic island below 100 mK. Our device is based on a normal metal-insulator-superconductor tunnel junction coupled to a resonator with transmission readout. In the first generation of the device, we achieve 90 μK/Hz^1/2 noise-equivalent temperature with 10 MHz bandwidth. We measure the thermal relaxation time of the electron gas in the island, which we find to be of the order of 100 μs. Such a calorimetric detector, upon optimization, can be seamlessly integrated into superconducting circuits, with immediate applications in quan…
We study the electronic structure of a single self-assembled InAs quantum dot by probing elastic single-electron tunneling through a single pair of weakly coupled dots. In the region below pinch-off voltage, the non-linear threshold voltage behavior provides electronic addition energies exactly as the linear, Coulomb blockade oscillation does. By analyzing it, we identify the s and p shell addition spectrum for up to six electrons in the single InAs dot, i.e. one of the coupled dots. The evolution of shell addition spectrum with magnetic field provides Fock-Darwin spectra of s and p shell.
The spectrum of a segment of InAs nanowire, confined between two superconducting leads, was measured as function of gate voltage and superconducting phase difference using a third normal-metal tunnel probe. Sub-gap resonances for odd electron occupancy---interpreted as bound states involving a confined electron and a quasiparticle from the superconducting leads, reminiscent of Yu-Shiba-Rusinov states---evolve into Kondo-related resonances at higher magnetic fields. An additional zero bias peak of unknown origin is observed to coexist with the quasiparticle bound states.
We show how resonant laser spectroscopy of the trion optical transitions in a self-assembled quantum dot can be used to determine the temperature of a nearby electron reservoir. At finite magnetic field the spin-state occupation of the Zeeman-split quantum dot electron ground states is governed by thermalization with the electron reservoir via co-tunneling. With resonant spectroscopy of the corresponding excited trion states we map out the spin occupation as a function of magnetic field to establish optical thermometry for the electron reservoir. We demonstrate the implementation of the techni…
A triple-heterojunction (3HJ) design is employed to improve p-type InAs/GaSb heterojunction (HJ) tunnel FETs. The added two HJs (AlInAsSb/InAs in the source and GaSb/AlSb in the channel) significantly shorten the tunnel distance and create two resonant states, greatly improving the ON state tunneling probability. Moreover, the source Fermi degeneracy is reduced by the increased source (AlInAsSb) density of states and the OFF state leakage is reduced by the heavier channel (AlSb) hole effective masses. Quantum ballistic transport simulations show, that with V_{DD} = 0.3V and I_{OFF} = 10^{-3}A/…
We have successfully fabricated Cu/AlOx-Al/Nb normal-metal/insulator/superconductor tunnel junction devices with a high value of the superconducting gap (up to $\sim 1$ mV), using electron-beam lithography and angle evaporation techniques in the sub-micron scale. The subgap conductance of these junctions shows the expected strong temperature dependence, rendering them suitable for thermometry all the way from 100 mK to 6 K. In addition, some direct electronic cooling of the normal metal was also seen at bias values near the gap edge. The device performance was strongly influenced by the detail…
We present a study of Andreev Quantum Dots (QDots) fabricated with small-diameter (30 nm) Si-doped InAs nanowires where the Fermi level can be tuned across a mobility edge separating localized states from delocalized states. The transition to the insulating phase is identified by a drop in the amplitude and width of the excited levels and is found to have remarkable consequences on the spectrum of superconducting SubGap Resonances (SGRs). While at deeply localized levels, only quasiparticles co-tunneling is observed, for slightly delocalized levels, Shiba bound states form and a parity changin…
We report tunneling spectroscopy measurements of the Zeeman spin splitting in InAs few-electron quantum dots. The dots are formed between two InP barriers in InAs nanowires with a wurtzite crystal structure grown by chemical beam epitaxy. The values of the electron g-factors of the first few electrons entering the dot are found to strongly depend on dot size and range from close to the InAs bulk value in large dots |g^*|=13 down to |g^*|=2.3 for the smallest dots. These findings are discussed in view of a simple model.
We observe a series of sharp resonant features in the tunnelling differential conductance of InAs quantum dots. We found that dissipative quantum tunnelling has a strong influence on the operation of nano-devices. Because of such tunnelling the current-voltage characteristics of tunnel contact created between atomic force microscope tip and a surface of InAs/GaAs quantum dots display many interesting peaks. We found that the number, position, and heights of these peaks are associated with the phonon modes involved. To describe the found effect we use a quasi-classical approximation. There the …
Quantum dots realized in InAs are versatile systems to study the effect of spin-orbit interaction on the spin coherence, as well as the possibility to manipulate single spins using an electric field. We present transport measurements on quantum dots realized in InAs nanowires. Lithographically defined top-gates are used to locally deplete the nanowire and to form tunneling barriers. By using three gates, we can form either single quantum dots, or two quantum dots in series along the nanowire. Measurements of the stability diagrams for both cases show that this method is suitable for producing …
A gate-defined quantum dot in an InAs nanowire is fabricated on top of a quantum point contact realized in a two-dimensional electron gas. The strong coupling between these two quantum devices is used to perform time-averaged as well as time-resolved charge detection experiments for electron flow through the quantum dot. We demonstrate that the Fano factor describing shot noise or time-correlations in single-electron transport depends in the theoretically expected way on the asymmetry of the tunneling barriers even in a regime where the thermal energy $k_\mathrm{B}T$ is comparable to the singl…
We report growth and characterization of a coupled quantum dot structure that utilizes nanowire templates for selective epitaxy of radial heterostructures. The starting point is a zinc blende InAs nanowire with thin segments of wurtzite structure. These segments have dual roles: they act as tunnel barriers for electron transport in the InAs core, and they also locally suppress growth of a GaSb shell, resulting in coaxial InAs-GaSb quantum dots with integrated electrical probes. The parallel quantum dot structure hosts spatially separated electrons and holes that interact due to the type-II bro…
Coupling individual atoms via tunneling fundamentally changes the state of matter: electrons bound to atomic cores become delocalized resulting in a change from an insulating to a metallic state, as it is well known from the canonical example of solids. A chain of atoms could lead to more exotic states if the tunneling takes place via the superconducting vacuum and can induce topologically protected excitations like Majorana or parafermions. Toward the realization of such artificial chains, coupling a single atom to the superconducting vacuum is well studied, but the hybridization of two sites…
We present magnetoresistance (MR) experiments on an InAs nanowire quantum dot device with two ferromagnetic sidegates (FSGs) in a split-gate geometry. The wire segment can be electrically tuned to a single dot or to a double dot regime using the FSGs and a backgate. In both regimes we find a strong MR and a sharp MR switching of up to 25\% at the field at which the magnetizations of the FSGs are inverted by the external field. The sign and amplitude of the MR and the MR switching can both be tuned electrically by the FSGs. In a double dot regime close to pinch-off we find {\it two} sharp trans…
In this report, we study electromechanical properties of a suspended InAs nanowire (NW) resonator. At low temperatures, the NW acts as the island of a single electron transistor (SET) and we observe a strong coupling between electrons and mechanical modes at resonance; the rate of electron tunneling is approximately 10 times the resonant frequency. Above and below the mechanical resonance, the magnitude of Coulomb peaks is different and we observe Fano resonance in conductance due to the interference between two contributions to potential of the SET. The quality factor ($Q$) of these devices i…
