arXivDaily arXiv每日学术速递 周一至周五更新
arXiv 1609.01803cond-mat.soft
收藏

交联聚电多肽的非线性

Nonlinearity In A Crosslinked Polyelectric Polypeptide

Jorge Monreal, John Schreiber, Donald T. Haynie

摘要:

测定了不同条件下交联合成多肽软固体的杨氏模量。以聚L-赖氨酸(PLK)和1-乙基-3-(3-二甲氨基丙基)碳二亚胺盐酸盐(EDC)为交联剂,制备了聚L-谷氨酸$_4$,L-酪氨酸$_1$ [PLEY(4:1)]共聚物。通过使样品经受压缩应变来评估弹性。交联材料在高相对湿度,RH 75- 85%下表现出非线性弹性。应力-应变响应在低应变下近似线性,但在阈值应变以上为非线性。割线模量的分析表明,在低应变和硬化在高应变,在生物软组织的样品明显软化。用neo-Hookean模型拟合应力-应变数据,在高RH下得到约40 $\le E \le$ 300 kPa。在低相对湿度下,粘弹性呈非线性。平均粘度驱动松弛时间为13分钟,在高应变和6分钟,在低应变。非线性弹性材料的割线模量的导数的分析揭示了高达$\varepsilon \approx$ 0.18-0.20的应变的瞬态响应。超过这个范围,振荡趋于零。非线性粘弹性材料表现出较低的振幅振荡比样品在高RH高达$\varepsilon \approx$ 0.06和强阻尼之后。这些数据表明,它将是可能的工程多肽材料的机械性能。

英文摘要:

Youngs modulus of soft solids composed of crosslinked synthetic polypeptides has been determined under different conditions. Co-poly-(L-glutamic acid$_4$, L-tyrosine$_1$) [PLEY (4:1)] was crosslinked with poly-L-lysine (PLK) and 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide hydrochloride (EDC). Elasticity was assessed by subjecting samples to a compressive strain. Cross-linked material at high relative humidity, RH 75-85%, exhibited non-linear elasticity. Stress-strain response was approximately linear at low strain but nonlinear above a threshold strain. Analysis of the secant modulus revealed apparent softening of samples at low strain and hardening at high strain, as in biological soft tissues. Fitting stress-strain data with a neo-Hookean model yielded approximately 40 $\le E \le$ 300 kPa at high RH. Viscoelasticity was nonlinear at low RH. The average viscosity-driven relaxation time was 13 min at high strain and 6 min at low strain. Analysis of the derivative of the secant modulus for non-linear elastic materials revealed a transient response up to a strain of $\varepsilon \approx$ 0.18-0.20. Above this range, oscillations tended to zero. Non-linear viscoelastic materials showed lower-amplitude oscillations than samples at high RH up to $\varepsilon \approx$ 0.06 and strong damping thereafter. The data suggest that it will be possible to engineer mechanical properties of polypeptide materials.

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑