Multi-phase material are frequently applied in a wide variety of products, as they posses a unique set of properties by combining two or more distinct phases at the level of the microstructure. Although the macroscopic stiffness and hardening are reasonably well understood, questions remain about the dominant failure mechanism(s). We identify the role of the microstructural topology (the distribution of phases) on damage "hot-spot" in the microstructure, by performing a numerical study on a large set of randomly generated topologies. The result identifies a distinct probability distribution of phases around a typical damage "hot-spot". This work is focused on assessing the sensitivity of the result to the assumptions made on the microstructural geometry.
Phase-Field Modeling of Coupled Brittle-Ductile Fracture in Aluminum Alloys
含析出相铝合金的断裂至少涉及两种机制,即富铝基体的韧性断裂和析出相的脆性断裂。在这项工作中,耦合晶体塑性相场模型的混合韧脆破坏模式的制定和使用的影响,在铝合金中的损伤演化的沉淀形态和尺寸分布的调查。在断裂过程区的弹性和塑性功耗散的一致性框架被用来制定脆性和韧性损伤的耦合本构行为,分别。产生具有不同颗粒形态和取向的代表性体积元(RVE),并模拟其单轴载荷以评估不同模型微结构的抗损伤性。对于铝基体的临界能量释放率$G_c$值范围为4至8 Jm $^{-2}$的单晶和10至16 Jm $^{-2}$的多晶体,该模型预测的变化,从颗粒脱粘到开裂,然后韧性基体失效。观察到颗粒失效机制的变化,作为增加$G_c$的结果,单,多晶模型微观结构。对于颗粒脱粘的情况下,与其他研究的情况相比,具有圆形或椭圆形颗粒(主轴垂直于加载方向)的微观结构显示出更高的延展性和断裂功。在颗粒开裂的情况下,与平行于加载轴排列的椭球形颗粒的显微组织显示出较高的延展性和断裂功之间的调查的情况下。模拟定性再现实验观察到的颗粒失效机制(开裂和脱粘)的两个不同的基体合金类(商业纯和2xxx合金)与陶瓷颗粒增强。
Strengthening and toughening mechanisms in heterostructured laminates revealed by a phase field-enhanced crystal plasticity simulation
Sichuan Province Key Laboratory of Advanced Structural Materials Mechanical Behavior and Service Safety, School of Mechanics and Aerospace Engineering, Southwest Jiaotong University(西南交通大学力学与航空航天学院);School of Materials Science and Engineering, Southwest Jiaotong University(西南交通大学材料科学与工程学院);Department of Engineering Mechanics, School of Aeronautics and Astronautics, Zhejiang University(浙江大学航空航天学院工程力学系);WW8-Materials Simulation, Department of Materials Science, Friedrich-Alexander Universität Erlangen-Nürnberg(埃尔朗根-纽伦堡大学材料科学系)
Exploration of the Microstructure Space in TiAlZrN Ultra-Hard Nanostructured Coatings
Ti $_{1-x-y}$ Al $_{x}$ Zr $_{y}$ N立方合金在25-70\% Al成分范围内由于高温下的亚稳相变途径而具有高的时效硬化能力。因此,它们是超硬纳米涂层材料的理想候选者。越来越多的证据表明,这种效果与弹性化学场诱导的相分离成成分分离的纳米立方氮化物相有关。在这里,我们研究了在1200 $^\circ$ C的调幅区域内的伪三元系的微观结构的演变,通过使用弹性化学相场模型。我们的模拟表明,氮化物纳米畴之间的弹性相互作用不仅极大地影响微观结构的形态,而且局部化学相平衡。在富铝区域的组合物空间中,我们进一步观察到富AlN相转变成其平衡纤锌矿晶体结构的发病。这项工作指出了这些氮化物系统可能获得的广泛的微观结构,并且它们的定制可能导致过渡金属氮化物基涂层材料的性能的显着改善。
Evaluation of microstructure and mechanical property variations in AlxCoCrFeNi high entropy alloys produced by a high-throughput laser deposition method
Exploring the microstructural origins of conductivity and hysteresis in metal halide perovskites via active learning driven automated scanning probe microscopy