arXivDaily arXiv每日学术速递 周一至周五更新
arXiv 1603.06644cond-mat.mes-hall
收藏

单层和少层MoS2的成像光谱椭偏术

Imaging Spectroscopic Ellipsometry of Mono- and Few-layer MoS2

S. Funke, B. Miller, E. Parzinger, P. Thiesen, A. W. Holleitner, U. Wurstbauer

摘要:

用椭圆偏振光谱成像技术研究了二硫化钼(MoS2)单层和多层膜的微机械剥离。结合刀口照明,可以在任意平面和透明基材上检测和分类MoS2薄片,横向分辨率低至1至2 μ m。从单层和三层二硫化钼的复介电函数。它们是从多层膜模型中提取的,以适合采用各向异性和各向同性拟合方法测得的椭偏角。我们发现,光学常数的临界点的能量可以被视为是独立的所使用的模型,而光学常数的大小与所使用的模型。各向异性模型表明,蓝宝石支撑的MoS2片的最大吸收率对于单层为约14%,对于三层MoS2为10%。此外,单层MoS2的复介电函数的横向均匀性进行了研究,空间分辨率为2 μ m。仅观察到微小波动。没有证据的应变,为大量的无序或晶格缺陷,可以发现在二硫化钼单层从互补的拉曼光谱测量的无裂纹区域。我们假设,在光学常数的微小的横向变化所造成的范德华相互作用的横向修改,大概是由使用微机械剥离和粘弹性冲压制备。

英文摘要:

Micromechanically exfoliated mono- and multilayers of molybdenum disulfide (MoS2) are investigated by spectroscopic imaging ellipsometry. In combination with knife edge illumination, MoS2 flakes can be detected and classified on arbitrary flat and also transparent substrates with a lateral resolution down to 1 to 2 um. The complex dielectric functions from mono- and trilayer MoS2 are presented. They are extracted from a multilayer model to fit the measured ellipsometric angles employing an anisotropic and an isotropic fit approach. We find that the energies of the critical points of the optical constants can be treated to be independent of the utilized model, whereas the magnitude of the optical constants varies with the used model. The anisotropic model suggests a maximum absorbance for a MoS2 sheet supported by sapphire of about 14 % for monolayer and of 10 % for trilayer MoS2. Furthermore, the lateral homogeneity of the complex dielectric function for monolayer MoS2 is investigated with a spatial resolution of 2 um. Only minor fluctuations are observed. No evidence for strain, for a significant amount of disorder or lattice defects can be found in the wrinkle-free regions of the MoS2 monolayer from complementary Raman spectroscopy measurements. We assume that the minor lateral variation in the optical constants are caused by lateral modification in the van der Waals interaction presumably caused by the preparation using micromechanical exfoliation and viscoelastic stamping.

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑