arXivDaily arXiv每日学术速递 周一至周五更新
arXiv 1601.00249physics.ins-detphysics.med-ph
收藏

相位型II质子CT(pCT)距离叠加探测器的标定与GEANT4模拟

Calibration and GEANT4 Simulations of the Phase II Proton Compute Tomography (pCT) Range Stack Detector

S. A. Uzunyan, G. Blazey, S. Boi, G. Coutrakon, A. Dyshkant, K. Francis, D. Hedin, E. Johnson, J. Kalnins, V. Zutshi, R. Ford, J. E. Rauch, P. Rubinov, G. Sellb… 展开作者

S. A. Uzunyan, G. Blazey, S. Boi, G. Coutrakon, A. Dyshkant, K. Francis, D. Hedin, E. Johnson, J. Kalnins, V. Zutshi, R. Ford, J. E. Rauch, P. Rubinov, G. Sellberg, P. Wilson, M. Naimuddin

摘要:

北伊利诺伊大学与费米国家加速器实验室(FNAL)和德里大学合作,一直在设计和建造质子CT扫描仪,用于质子治疗计划。Phase II质子CT扫描仪由八个平面的跟踪探测器组成,在患者前后进行两次X和两次Y坐标测量。此外,由排列在十二个八瓦片帧中的薄闪烁体瓦片的堆叠组成的范围堆叠探测器用于确定通过患者的每个轨迹的水等效路径长度(WEPL)。X-Y坐标和WEPL是图像重建软件所需的输入,以找到患者中每个体素的相对(质子)阻止本领(RSP)值并生成相应的3D图像。在本说明中,我们描述了2015年在伊利诺伊州沃伦维尔的中央杜佩奇医院的质子束上进行的测试,重点是距离叠加校准程序以及与GEANT~4距离叠加模拟的比较。

英文摘要:

Northern Illinois University in collaboration with Fermi National Accelerator Laboratory (FNAL) and Delhi University has been designing and building a proton CT scanner for applications in proton treatment planning. The Phase II proton CT scanner consists of eight planes of tracking detectors with two X and two Y coordinate measurements both before and after the patient. In addition, a range stack detector consisting of a stack of thin scintillator tiles, arranged in twelve eight-tile frames, is used to determine the water equivalent path length (WEPL) of each track through the patient. The X-Y coordinates and WEPL are required input for image reconstruction software to find the relative (proton) stopping powers (RSP) value of each voxel in the patient and generate a corresponding 3D image. In this Note we describe tests conducted in 2015 at the proton beam at the Central DuPage Hospital in Warrenville, IL, focusing on the range stack calibration procedure and comparisons with the GEANT~4 range stack simulation.

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑