arXivDaily arXiv每日学术速递 周一至周五更新
arXiv周末暂无论文更新,休息一下吧,周末愉快~~
arXiv 1509.08358astro-ph.IM
收藏

采用马赫-曾德尔波前传感器的ELT XAO试验台的研制:变形镜的标定

Development of an ELT XAO testbed using a Mach-Zehnder wavefront sensor: calibration of the deformable mirror

Christian Delacroix, Maud Langlois, Magali Loupias, Eric Thiébaut, Louisa Adjali, Jonathan Leger, Michel Tallon

摘要:

极自适应光学(XAO)在满足未来超大望远镜的高速度(> 1 kHz)、高精度和高次要求方面遇到了严重的困难。一种创新的高阶自适应光学系统使用自参考马赫-曾德尔波前传感器(MZWFS)允许抵消这些限制。该传感器通过测量两个输出之间的强度差来非常精确地估计小空间尺度下的波前相位,其中在其两个支路之间具有$λ/4$路径长度差,但是由于相位模糊而在动态范围中受到限制。在过去的几年里,我们的团队在8米级望远镜的框架内研究了这样一个XAO系统。在这项工作中,我们报告了我们最近在实验室安装的XAO测试平台的最新结果,并致力于使用30米级望远镜(如E-ELT或TMT)进行高对比度成像。在回顾了MZWFS的原理并描述了我们实验的光学布局之后,我们将展示低音-高音相位校正器的评估结果,即,Boston Micromachine连续膜可变形反射镜(DM)和Boulder非线性系统液晶空间光调制器(SLM)。特别是,我们将详细介绍使用Zygo干涉仪计量的DM的校准。我们的方法包括在膜变形的精确测量,同时施加恒定的变形9出140致动器在同一时间。通过在DM工作范围内改变戳电压,我们提出了一种简单而有效的方法,使用高斯模型建模DM影响函数。最后,我们展示了允许补偿低阶像差的MZWFS上的DM平坦化。

英文摘要:

(abridged) Extreme adaptive optics (XAO) encounters severe difficulties to cope with the high speed (>1kHz), high accuracy and high order requirements for future extremely large telescopes. An innovative high order adaptive optics system using a self-referenced Mach-Zehnder wavefront sensor (MZWFS) allows counteracting these limitations. This sensor estimates very accurately the wavefront phase at small spatial scale by measuring intensity differences between two outputs, with a $λ/4$ path length difference between its two legs, but is limited in dynamic range due to phase ambiguity. During the past few years, such an XAO system has been studied by our team in the framework of 8-meter class telescopes. In this work, we report on our latest results with the XAO testbed recently installed in our lab, and dedicated to high contrast imaging with 30m-class telescopes (such as the E-ELT or the TMT). After reminding the principle of a MZWFS and describing the optical layout of our experiment, we will show the results of the assessment of the woofer-tweeter phase correctors, i.e., a Boston Micromachine continuous membrane deformable mirror (DM) and a Boulder Nonlinear Systems liquid crystal spatial light modulator (SLM). In particular, we will detail the calibration of the DM using Zygo interferometer metrology. Our method consists in the precise measurement of the membrane deformation while applying a constant deformation to 9 out of 140 actuators at the same time. By varying the poke voltage across the DM operating range, we propose a simple but efficient way of modeling the DM influence function using a Gaussian model. Finally, we show the DM flattening on the MZWFS allowing to compensate for low order aberrations.

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑