On-sky low order non-common path correction of the GPI Calibration Unit
Markus Hartung, Bruce Macintosh, Paul Langlois, Naru Sadakuni, Don Gavel, J. Kent Wallace, Dave Palmer, Lisa Poyneer, Dmitry Savransky, Sandrine Thomas, Darren … 展开作者
Markus Hartung, Bruce Macintosh, Paul Langlois, Naru Sadakuni, Don Gavel, J. Kent Wallace, Dave Palmer, Lisa Poyneer, Dmitry Savransky, Sandrine Thomas, Darren Dillon, Jennifer Dunn, Pascal Hibon, Fredrik Rantakyro, Stephen Goodsell
The Gemini Planet Imager (GPI) entered on-sky commissioning phase, and had its First Light at the Gemini South telescope in November 2013. Meanwhile, the fast loops for atmospheric correction of the Extreme Adaptive Optics (XAO) system have been closed on many dozen stars at different magnitudes (I=4-8), elevation angles and a variety of seeing conditions, and a stable loop performance was achieved from the beginning. Ultimate contrast performance requires a very low residual wavefront error (design goal 60 nm RMS), and optimization of the planet finding instrument on different ends has just begun to deepen and widen its dark hole region. Laboratory raw contrast benchmarks are in the order of 10^-6 or smaller. In the telescope environment and in standard operations new challenges are faced (changing gravity, temperature, vibrations) that are tackled by a variety of techniques such as Kalman filtering, open-loop models to keep alignment to within 5 mas, speckle nulling, and a calibration unit (CAL). The CAL unit was especially designed by the Jet Propulsion Laboratory to control slowly varying wavefront errors at the focal plane of the apodized Lyot coronagraph by the means of two wavefront sensors: 1) a 7x7 low order Shack-Hartmann SH wavefront sensor (LOWFS), and 2) a special Mach-Zehnder interferometer for mid-order spatial frequencies (HOWFS) - atypical in that the beam is split in the focal plane via a pinhole but recombined in the pupil plane with a beamsplitter. The original design goal aimed for sensing and correcting on a level of a few nm which is extremely challenging in a telescope environment. This paper focuses on non-common path low order wavefront correction as achieved through the CAL unit on sky. We will present the obtained results as well as explain challenges that we are facing.
We present a revision to the astrometric calibration of the Gemini Planet Imager (GPI), an instrument designed to achieve the high contrast at small angular separations necessary to image substellar and planetary-mass companions around nearby, young stars. We identified several issues with the GPI Data Reduction Pipeline (DRP) that significantly affected the determination of angle of north in reduced GPI images. As well as introducing a small error in position angle measurements for targets observed at small zenith distances, this error led to a significant error in the previous astrometric ca…
The Gemini Planet Imager (GPI) has been designed for the direct detection and characterization of exoplanets and circumstellar disks. GPI is equipped with a dual channel polarimetry mode designed to take advantage of the inherently polarized light scattered off circumstellar material to further suppress the residual seeing halo left uncorrected by the adaptive optics. We explore how recent advances in data reduction techniques reduce systematics and improve the achievable contrast in polarimetry mode. In particular, we consider different flux extraction techniques when constructing datacubes f…
The Gemini Planet Imager (GPI) has as its science instrument an infrared integral field spectrograph/polarimeter (IFS). Integral field spectrographs are scientificially powerful but require sophisticated data reduction systems. For GPI to achieve its scientific goals of exoplanet and disk characterization, IFS data must be reconstructed into high quality astrometrically and photometrically accurate datacubes in both spectral and polarization modes, via flexible software that is usable by the broad Gemini community. The data reduction pipeline developed by the GPI instrument team to meet these …
The Gemini Planet Imager (GPI) Extreme Adaptive Optics Coronograph contains an interferometric mode: a 10-hole non-redundant mask (NRM) in its pupil wheel. GPI operates at $Y, J, H$, and $K$ bands, using an integral field unit spectrograph (IFS) to obtain spectral data at every image pixel. NRM on GPI is capable of imaging with a half resolution element inner working angle at moderate contrast, probing the region behind the coronagraphic spot. The fine features of the NRM PSF can provide a reliable check on the plate scale, while also acting as an attenuator for spectral standard calibrators t…
The Gemini Planet Imager (GPI) is a new facility instrument for the Gemini Observatory designed to provide direct detection and characterization of planets and debris disks around stars in the solar neighborhood. In addition to its extreme adaptive optics and corona graphic systems which give access to high angular resolution and high-contrast imaging capabilities, GPI contains an integral field spectrograph providing low resolution spectroscopy across five bands between 0.95 and 2.5 $μ$m. This paper describes the sequence of processing steps required for the spectro-photometric calibration of…
The Gemini Planet Imager (GPI) is a next-generation, facility instrument currently being commissioned at the Gemini South observatory. GPI combines an extreme adaptive optics system and integral field spectrograph (IFS) with an apodized-pupil Lyot coronagraph (APLC) producing an unprecedented capability for directly imaging and spectroscopically characterizing extrasolar planets. GPI's operating goal of $10^{-7}$ contrast requires very precise alignments between the various elements of the coronagraph (two pupil masks and one focal plane mask) and active control of the beam path throughout the…
We present the wavelength calibration for the lenslet-based Integral Field Spectrograph (IFS) that serves as the science instrument for the Gemini Planet Imager (GPI). The GPI IFS features a 2.7" x 2.7" field of view and a 190 x 190 lenslet array (14.3 mas/lenslet) operating in $Y$, $J$, $H$, and $K$ bands with spectral resolving power ranging from $R$ $\sim$ 35 to 78. Due to variations across the field of view, a unique wavelength solution is determined for each lenslet characterized by a two-dimensional position, the spectral dispersion, and the rotation of the spectrum with respect to the d…
We present improvements to the wavelength calibration for the lenslet-based Integral Field Spectrograph (IFS), that serves as the science instrument for the Gemini Planet Imager (GPI). The GPI IFS features a 2.7" $\times$ 2.7" field of view and a 190 $\times$ 190 lenslet array (14.1 mas/lenslet) with spectral resolving power ranging from R $\sim$ 35 to 78. A unique wavelength solution is determined for each lenslet characterized by a two-dimensional position, an n-dimensional polynomial describing the spectral dispersion, and the rotation of the spectrum with respect to the detector axis. We i…
The Gemini Planet Imager is a newly commissioned facility instrument designed to measure the near-infrared spectra of young extrasolar planets in the solar neighborhood and obtain imaging polarimetry of circumstellar disks. GPI's science instrument is an integral field spectrograph that utilizes a HAWAII-2RG detector with a SIDECAR ASIC readout system. This paper describes the detector characterization and calibrations performed by the GPI Data Reduction Pipeline to compensate for effects including bad/hot/cold pixels, persistence, non-linearity, vibration induced microphonics and correlated r…
The Gemini Planet Imager (GPI) entered on-sky commissioning and had its first-light at the Gemini South (GS) telescope in November 2013. GPI is an extreme adaptive optics (XAO), high-contrast imager and integral-field spectrograph dedicated to the direct detection of hot exo-planets down to a Jupiter mass. The performance of the apodized pupil Lyot coronagraph depends critically upon the residual wavefront error (design goal of 60 nm RMS with 5 mas RMS tip/tilt), and therefore is most sensitive to vibration (internal or external) of Gemini's instrument suite. Excess vibration can be mitigated …
We present on-sky polarimetric observations with the Gemini Planet Imager (GPI) obtained at straight Cassegrain focus on the Gemini South 8-m telescope. Observations of polarimetric calibrator stars, ranging from nearly unpolarized to strongly polarized, enable determination of the combined telescope and instrumental polarization. We find the conversion of Stokes $I$ to linear and circular instrumental polarization in the instrument frame to be $I \rightarrow (Q_{\rm IP}, U_{\rm IP}, P_{\rm IP}, V_{\rm IP}) = (-0.037 \pm 0.010\%, +0.4338 \pm 0.0075\%, 0.4354 \pm 0.0075\%, -6.64 \pm 0.56\%)$. S…
We present the results of both laboratory and on sky astrometric characterization of the Gemini Planet Imager (GPI). This characterization includes measurement of the pixel scale of the integral field spectrograph (IFS), the position of the detector with respect to north, and optical distortion. Two of these three quantities (pixel scale and distortion) were measured in the laboratory using two transparent grids of spots, one with a square pattern and the other with a random pattern. The pixel scale in the laboratory was also estimate using small movements of the artificial star unit (ASU) in …
The newly commissioned Gemini Planet Imager (GPI) combines extreme adaptive optics, an advanced coronagraph, precision wavefront control and a lenslet-based integral field spectrograph (IFS) to measure the spectra of young extrasolar giant planets between 0.9-2.5 um. Each GPI detector image, when in spectral model, consists of ~37,000 microspectra which are under or critically sampled in the spatial direction. This paper demonstrates how to obtain high-resolution microlens PSFs and discusses their use in enhancing the wavelength calibration, flexure compensation and spectral extraction. This m…
The Gemini Planet Imager (GPI) is an instrument designed to directly image planets and circumstellar disks from 0.9 to 2.5 microns (the $YJHK$ infrared bands) using high contrast adaptive optics with a lenslet-based integral field spectrograph. We develop an extraction algorithm based on a least-squares method to disentangle the spectra and systematic noise contributions simultaneously. We utilize two approaches to adjust for the effect of flexure of the GPI optics which move the position of light incident on the detector. The first method is to iterate the extraction to achieve minimum residu…
Commissioning of SCUBA-2 included a program of skydips and observations of calibration sources intended to be folded into regular observing as standard methods of source flux calibration and to monitor the atmospheric opacity and stability. During commissioning, it was found that these methods could also be utilised to characterise the fundamental instrument response to sky noise and astronomical signals. Novel techniques for analysing on-sky performance and atmospheric conditions are presented, along with results from the calibration observations and skydips.
The advent of a new generation of low frequency interferometers has opened a direct window into the Epoch of Reionisation (EoR). However, key to a detection of the faint 21-cm signal, and reaching the sensitivity limits of these arrays, is a detailed understanding of the instruments and their calibration. In this work we use simulations to investigate the bias and uncertainty of redundancy based calibration. Specifically, we study the influence of the flux distribution of the radio sky and the impact of antenna position offsets on the complex calibration solutions. We find that the position of…
The daytime sky has been recently demonstrated as a useful calibration tool for deriving polarization cross-talk properties of large astronomical telescopes. The Daniel K Inouye Solar Telescope (DKIST) and other large telescopes under construction can benefit from precise polarimetric calibration of large mirrors. Several atmospheric phenomena and instrumental errors potentially limit the techniques accuracy. At the 3.67m AEOS telescope on Haleakala, we have performed a large observing campaign with the HiVIS spectropolarimeter to identify limitations and develop algorithms for extracting cons…
A new method of absolute calibration of sky noise temperature using a three-position switched spectrometer, measurements of antenna and low noise amplifier impedance with a vector network analyzer, and ancillary measurements of the amplifier noise waves is described. The details of the method and its application to accurate wideband measurements of the spectral index of the sky noise are described and compared with other methods.
Precise instrumental calibration is of crucial importance to 21-cm cosmology experiments. The Murchison Widefield Array's (MWA) Phase II compact configuration offers us opportunities for both redundant calibration and sky-based calibration algorithms; using the two in tandem is a potential approach to mitigate calibration errors caused by inaccurate sky models. The MWA Epoch of Reionization (EoR) experiment targets three patches of the sky (dubbed EoR0, EoR1, and EoR2) with deep observations. Previous work in \cite{Li_2018} and \cite{Wenyang_2019} studied the effect of tandem calibration on th…
The Gemini Planet Imager (GPI) is currently in its final Acceptance & Testing stages. GPI is an XAO system based on a tweeter & woofer architecture (43 & 9 actuators respectively across the pupil), with the tweeter being a Boston Michromachines $64^2$ MEMS device. The XAO AO system is tightly integrated with a Lyot apodizing coronagraph. Acceptance testing started in February 2013 at the University of California, Santa Cruz. A conclusive acceptance review was held in July 2013 and the instrument was found ready for shipment to the Gemini South telescope on Cerro Pachon, Chile. Commissioning at…
We describe techniques concerning wavelength calibration and sky subtraction to maximise the scientific utility of data from tunable filter instruments. While we specifically address data from the Optical System for Imaging and low Resolution Integrated Spectroscopy instrument (OSIRIS) on the 10.4~m Gran Telescopio Canarias telescope, our discussion is generalisable to data from other tunable filter instruments. A key aspect of our methodology is a coordinate transformation to polar coordinates, which simplifies matters when the tunable filter data is circularly symmetric around the optical ce…
As astronomical instruments become more sensitive, the requirements for the calibration software become more stringent; without accurate calibration solutions, thermal noise levels in images will not be reached and the scientific output of the instrument is degraded. Calibration requires bright sources with known properties, in particular with respect to their brightnesses as a function of frequency. However, for modern radio telescopes with a huge field of view, a single calibration source does not suffice; instead a sky model with tens of thousands of sources is needed. In this work, we inve…
We present the photometric calibration of the Beijing-Arizona Sky Survey (BASS) and Mayall z-band Legacy Survey (MzLS), which are two of the three wide-field optical legacy imaging surveys to provide the baseline targeting data for the Dark Energy Spectroscopic Instrument (DESI) project. The method of our photometric calibration is subdivided into the external and internal processes. The former utilizes the point-source objects of Pan-STARRS1 survey (PS1) as the reference standards to achieve the zero points of the absolute flux for individual exposures. And then the latter revise the zero poi…
The Gemini Planet Imager (GPI) combines extreme adaptive optics, an integral field spectrograph, and a high performance coronagraph to directly image extrasolar planets in the near-infrared. Because the coronagraph blocks most of the light from the star, it prevents the properties of the host star from being measured directly. Instead, satellite spots, which are created by diffraction from a square grid in the pupil plane, can be used to locate the star and extract its spectrum. We describe the techniques implemented into the GPI Data Reduction Pipeline to measure the properties of the satelli…
The Near-Infrared Spectrograph (NIRSpec) is one of four instruments aboard the James Webb Space Telescope (JWST). NIRSpec is developed by ESA with AIRBUS Defence & Space as prime contractor. The calibration of its various observing modes is a fundamental step to achieve the mission science goals and provide users with the best quality data from early on in the mission. Extensive testing of NIRSpec on the ground, aided by a detailed model of the instrument, allow us to derive initial corrections for the foreseeable calibrations. We present a snapshot of the current calibration scheme that will …
One of the principal challenges of 21 cm cosmology experiments is overcoming calibration error. Established calibration approaches in the field require an exquisitely accurate sky model, and low-level sky model errors introduce calibration errors that corrupt the cosmological signal. We present a novel calibration approach called Delay-Weighted Calibration, or DWCal, that enables precise calibration even in the presence of sky model error. Sky model error does not affect all power spectrum modes equally, and DWCal fits calibration solutions preferentially from error-free modes. We apply this t…
Presented here is list of 50 pairs quasi-evenly spaced over the northern sky, and that have Separations and Position Angles accurate at the milli-arcsec, and milli-degree level. These pairs are suggested as calibration pairs for lucky imaging observations. This paper is a follow-up to our previous paper regarding southern sky calibration pairs.
We present a calibration component for the Murchison Widefield Array All-Sky Virtual Observatory (MWA ASVO) utilising a newly developed PostgreSQL database of calibration solutions. Since its inauguration in 2013, the MWA has recorded over thirty-four petabytes of data archived at the Pawsey Supercomputing Centre. According to the MWA Data Access policy, data become publicly available eighteen months after collection. Therefore, most of the archival data are now available to the public. Access to public data was provided in 2017 via the MWA ASVO interface, which allowed researchers worldwide t…
Interferometric arrays seeking to measure the 21 cm signal from the Epoch of Reionization must contend with overwhelmingly bright emission from foreground sources. Accurate recovery of the 21 cm signal will require precise calibration of the array, and several new avenues for calibration have been pursued in recent years, including methods using redundancy in the antenna configuration. The newly upgraded Phase II of Murchison Widefield Array (MWA) is the first interferometer that has large numbers of redundant baselines while retaining good instantaneous UV-coverage. This array therefore provi…
The development of the Keck All sky Precision Adaptive optics (KAPA) project was initiated in September 2018 to upgrade the Keck I adaptive optics (AO) system to enable laser tomography adaptive optics (LTAO) with a four laser guide star (LGS) asterism. The project includes the replacement of the existing LMCT laser with a Toptica laser, the implementation of a new real-time controller (RTC) and wavefront sensor optics and camera, and a new daytime calibration and test platform to provide the required infrastructure for laser tomography. The work presented here describes the new daytime calibr…
At relatively high frequencies, highly sensitive grating sidelobes occur in the primary beam patterns of low frequency aperture arrays (LFAA) such as the Murchison Widefield Array (MWA). This occurs when the observing wavelength becomes comparable to the dipole separation for LFAA tiles, which for the MWA occurs at approximately 300 MHz. The presence of these grating sidelobes has made calibration and image processing for 300 MHz MWA observations difficult. This work presents a new calibration and imaging strategy which employs existing techniques to process two example 300 MHz MWA observation…
SCUBA-2 is a 10000-bolometer submillimetre camera on the James Clerk Maxwell Telescope (JCMT). The instrument commissioning was completed in September 2011, and full science operations began in October 2011. To harness the full potential of this powerful new astronomical tool, the instrument calibration must be accurate and well understood. To this end, the algorithms for calculating the line-of-sight opacity have been improved, and the derived atmospheric extinction relationships at both wavebands of the SCUBA-2 instrument are presented. The results from over 500 primary and secondary calibra…
QUIJOTE-TFGI polarization calibration -- Ground characterization and on-sky validation with Tau A and the Moon
Instituto de Astrofísica de Canarias（加那利天体物理学研究所）；Universidad de La Laguna (ULL)（拉古纳大学）；Instituto de Física de Cantabria (IFCA)（坎塔布里亚物理研究所）；Kavli Institute for the Physics and Mathematics of the Universe (WPI), The University of Tokyo Institutes for Advanced Study, The University of Tokyo（东京大学前沿研究科 Kavli宇宙物理数学研究所）
We present an initial analysis of the properties of the all-sky image obtained by the Far-Infrared Surveyor (FIS) onboard the AKARI satellite, at 65~$μ$m (N60), 90~$μ$m (WIDE-S), 140~$μ$m (WIDE-L),and 160~$μ$m (N160). Absolute flux calibration was determined by comparing the data with the COBE/DIRBE data sets, and the intensity range was as wide as from a few MJy~sr$^{-1}$ to $>$1~GJy~sr$^{-1}$. The uncertainties are considered to be the standard deviations with respect to the DIRBE data, and they are less than 10\% for intensities above 10, 3, 25, and 26~MJy~sr$^{-1}$ at the N60, WIDE-S, WIDE…
ASTRI-Horn is the Cherenkov telescope developed by INAF and operating in Italy on the slopes of Etna volcano. Characterized by a dual-mirror optical system and a focal plane covered by silicon photomultiplier sensors, ASTRI-Horn is a prototype of the telescopes proposed to form one of the pathfinder sub-arrays of the Cherenkov Telescope Array Observatory in Chile. The electronics of the ASTRI-Horn telescope, optimized to detect nanosecond burst of light, is not able to directly measure any continuous or slowly varying flux illuminating its camera. To measure the intensity of the night sky back…
A Formalism for Calibrating the Instrumental Polarization of Radio Interferometric Arrays at Meter Wavelengths using Unpolarized Sky: A Demonstration using the MWA Observations
Pixel-Level Calibration for Space-Based High Precision Astrometry Using Young's Fringes
Institut de Planétologie et d’Astrophysique（行星与天体物理研究所）；PYXALIS；Centre de Recherche Astrophysique de Lyon（里昂天体物理研究中心）；Centre National d’Etudes Spatiales（法国国家空间研究中心）
The Low Frequency Array (LOFAR) is an ideal instrument to conduct deep extragalactic surveys. It has a large field of view and is sensitive to large scale and compact emission. It is, however, very challenging to synthesize thermal noise limited maps at full resolution, mainly because of the complexity of the low-frequency sky and the direction dependent effects (phased array beams and ionosphere). In this first paper of a series we present a new calibration and imaging pipeline that aims at producing high fidelity, high dynamic range images with LOFAR High Band Antenna data, while being compu…
The next generation of Cherenkov telescope cameras feature Silicon Photo Multipliers (SiPM), which can guarantee excellent performance and allow for observation also under moonlight, increasing duty-cycle and therefore the physics reach. A 4 m-diameter Davies-Cotton prototype telescope with a 9-degree optical FoV and a 1296-pixel SiPM camera, has been designed to meet the requirements of the next generation of ground-based gamma-ray observatories at the highest energies. The large-scale production of the telescopes for array deployment has required the development of a fully automated calibrat…
We are developing an ultra-wideband spectroscopic instrument, DESHIMA (DEep Spectroscopic HIgh-redshift MApper), based on the technologies of an on-chip filter-bank and Microwave Kinetic Inductance Detector (MKID) to investigate dusty star-burst galaxies in the distant universe at millimeter and submillimeter wavelength. An on-site experiment of DESHIMA was performed using the ASTE 10-m telescope. We established a responsivity model that converts frequency responses of the MKIDs to line-of-sight brightness temperature. We estimated two parameters of the responsivity model using a set of skydip…
We present a precise photometric calibration of the first 1.5 years of science imaging from the Pan-STARRS1 survey (PS1), an ongoing optical survey of the entire sky north of declination -30 degrees in five bands. Building on the techniques employed by Padmanabhan et al. (2008) in the Sloan Digital Sky Survey (SDSS), we use repeat PS1 observations of stars to perform the relative calibration of PS1 in each of its five bands, solving simultaneously for the system throughput, the atmospheric transparency, and the large-scale detector flat field. Both internal consistency tests and comparison aga…
We present descriptions of the alignment and calibration tests of the Pathfinder, which achieved first light during our 2013 commissioning campaign at the LBT. The full LINC-NIRVANA instrument is a Fizeau interferometric imager with fringe tracking and 2-layer natural guide star multi-conjugate adaptive optics (MCAO) systems on each eye of the LBT. The MCAO correction for each side is achieved using a ground layer wavefront sensor that drives the LBT adaptive secondary mirror and a mid-high layer wavefront sensor that drives a Xinetics 349 actuator DM conjugated to an altitude of 7.1 km. When …
Since its formulation by Hamaker et al., the radio interferometer measurement equation (RIME) has provided a rigorous mathematical basis for the development of novel calibration methods and techniques, including various approaches to the problem of direction-dependent effects (DDEs). This series of papers aims to place recent developments in the treatment of DDEs into one RIME-based mathematical framework, and to demonstrate the ease with which the various effects can be described and understood. It also aims to show the benefits of a RIME-based approach to calibration. Paper I re-derives the …
Radio interferometric gain calibration can be biased by incomplete sky models and radio frequency interference, resulting in calibration artefacts that can restrict the dynamic range of the resulting images. It has been suggested that calibration algorithms employing heavy-tailed likelihood functions are less susceptible to this due to their robustness against outliers in the data. We present an algorithm based on a Student's t-distribution which leverages the framework of complex optimisation and Wirtinger calculus for efficient and robust interferometric gain calibration. We integrate this a…
Second-generation exoplanet imagers using extreme adaptive optics and coronagraphy have demonstrated their great potential for studying close circumstellar environments and for detecting new companions and helping to understand their physical properties. However, at very small angular separation, their performance in contrast is limited by several factors: diffraction by the complex telescope pupil not perfectly canceled by the coronagraph, residual dynamic wavefront errors, chromatic wavefront errors, and wavefront errors resulting from noncommon path aberrations (NCPAs). In a previous work, …
We study the impact of sky-based calibration errors from source mismodeling on 21\,cm power spectrum measurements with an interferometer and propose a method for suppressing their effects. While emission from faint sources that are not accounted for in calibration catalogs is believed to be spectrally smooth, deviations of true visibilities from model visibilities are not, due to the inherent chromaticity of the interferometer's sky-response (the "wedge"). Thus, unmodeled foregrounds, below the confusion limit of many instruments, introduce frequency structure into gain solutions on the same l…
The Bayesian Global Sky Model (B-GSM): Validation of a Data Driven Bayesian Simultaneous Component Separation and Calibration Algorithm for EoR Foreground Modelling
The construction of the Cherenkov Telescope Array is expected to start soon. We will present the baseline methods and their extensions currently foreseen to calibrate the observatory. These are bound to achieve the strong requirements on allowed systematic uncertainties for the reconstructed gamma-ray energy and flux scales, as well as on the pointing resolution, and on the overall duty cycle of the observatory. Onsite calibration activities are designed to include a robust and efficient calibration of the telescope cameras, and various methods and instruments to achieve calibration of the ove…
Investigations of the point spread functions (PSFs) and flux calibrations for stacking analysis have been performed with the far-infrared (wavelengths range of 60 to 140 um all-sky maps taken by the Far-Infrared Surveyor (FIS) onboard the AKARI satellite. The PSFs are investigated by stacking the maps at the positions of standard stars with their fluxes of 0.02 -10 Jy. The derived full widths at the half maximum (FWHMs) of the PSFs are ~ 60 arcsec at 65 and 90 um and ~ 90 arcsec at 140 um, which are much smaller than that of the previous all-sky maps obtained with IRAS (~ 6 arcmin). Any flux d…
