用于切伦科夫望远镜阵列的INFN照相机演示器
INFN Camera demonstrator for the Cherenkov Telescope Array
摘要:
切伦科夫望远镜阵列是新一代成像级地面切伦科夫望远镜的世界性项目,目的是探索电磁波谱的最高能量区域。有了两个计划中的阵列,每个半球一个,它将保证从几十GeV到几百TeV能量范围内的良好天空覆盖,具有改进的角分辨率和TeV能量区域的灵敏度,比目前运行的阵列高一个数量级。为了覆盖这一广泛的能量范围,设想了三种不同的望远镜类型,具有不同的反射镜尺寸和焦平面特征。特别地,对于最高能量,可能的设计是具有紧凑焦平面的双镜Schwarzschild-Couder光学方案。提出了一种基于硅光电倍增器(SiPM)的相机作为匹配像素尺寸(约0.17度的角尺寸)的解决方案。INFN正在开发由9个光电传感器模块制成的相机演示器(PSM,每个64像素,总覆盖范围为焦平面的1/4),配备FBK(Fondazione Bruno Kessler,Italy)基于Target 7 ASIC的近紫外高填充因子SiPM和前端电子器件(FEE),16通道快速采样器(高达2GS/s),具有专门为此目的开发的深度缓冲、自触发和按需数字化功能。$6\times6$ mm $^2$的像素尺寸导致非常紧凑的设计,具有挑战性的散热问题。模块化结构由容纳一个PSM和相应的FEE的铜框架制成,具有水冷却系统以保持所需的工作温度。介绍并讨论了该演示器的实际设计、采用的技术方案和取得的成果。
英文摘要:
The Cherenkov Telescope Array is a world-wide project for a new generation of ground-based Cherenkov telescopes of the Imaging class with the aim of exploring the highest energy region of the electromagnetic spectrum. With two planned arrays, one for each hemisphere, it will guarantee a good sky coverage in the energy range from a few tens of GeV to hundreds of TeV, with improved angular resolution and a sensitivity in the TeV energy region better by one order of magnitude than the currently operating arrays. In order to cover this wide energy range, three different telescope types are envisaged, with different mirror sizes and focal plane features. In particular, for the highest energies a possible design is a dual-mirror Schwarzschild-Couder optical scheme, with a compact focal plane. A silicon photomultiplier (SiPM) based camera is being proposed as a solution to match the dimensions of the pixel (angular size of ~ 0.17 degrees). INFN is developing a camera demonstrator made by 9 Photo Sensor Modules (PSMs, 64 pixels each, with total coverage 1/4 of the focal plane) equipped with FBK (Fondazione Bruno Kessler, Italy) Near UltraViolet High Fill factor SiPMs and Front-End Electronics (FEE) based on a Target 7 ASIC, a 16 channels fast sampler (up to 2GS/s) with deep buffer, self-trigger and on-demand digitization capabilities specifically developed for this purpose. The pixel dimensions of $6\times6$ mm$^2$ lead to a very compact design with challenging problems of thermal dissipation. A modular structure, made by copper frames hosting one PSM and the corresponding FEE, has been conceived, with a water cooling system to keep the required working temperature. The actual design, the adopted technical solutions and the achieved results for this demonstrator are presented and discussed.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。