arXivDaily arXiv每日学术速递 周一至周五更新
arXiv 1506.02168math.NAcs.NA
收藏

关于有限元质量矩阵的半解析积分方法

On Semi-Analytical Integration Specified for Mass Matrix of Finite Elements

Faculty of Mechanical Engineering, Technion – Israel Institute of Technology(以色列理工学院机械工程学院)

Eli Hanukah

AI总结:

本文提出一种半解析方法用于计算有限元质量矩阵,通过分离积分函数为两部分,提高计算效率和精度,针对八节点砖元推导出一阶和四阶公式,并通过粗网格测试验证其准确性。

摘要:

空间数值积分对于有限元分析至关重要。目前,基于高斯求积的数值积分方案被广泛使用。本文提出了一种替代的半解析方法用于质量矩阵评估,产生了一种准确、高效且易于实现的积分规则。为此,质量矩阵条目的被分离为两个乘积部分。第一部分依赖于自然坐标,第二部分也依赖于元素参数(网格)。第二部分使用多项式和在采样(积分)点上的函数评估进行近似,允许后来的解析积分预先计算权重矩阵。所得到的公式具有典型形式,使得计算效率等同于传统方案,即我们的n点公式在计算效率上等同于传统n点求积法。具体而言,针对八节点砖元推导出一阶和四阶半解析公式。我们的一阶规则精确描述了常数度量和密度元素;四阶方案正确接受线性度量密度乘法。基于粗网格研究,在精度方面建立了显著优势。因此,通过ABAQUS生成测试集,并通过各种公式进行分析。报告作者旨在实现以下目标:* 引入一种计算实体有限元质量矩阵的替代方法,包括不均匀连续体,一致和不一致质量矩阵。* 为广泛使用的八节点砖元提供新的易于实现、高效、特定的公式。* 通过商业软件生成的粗网格展示精度优势。

英文摘要:

Spatial numerical integration is essential for finite element analysis. Currently, numerical integration schemes, mostly based on Gauss quadrature, are widely used. Herein, we present an alternative semi-analytical approach for mass matrix evaluation, resulting in an accurate, efficient and easy-to-implement integration rule. To this end, integrands of mass matrix entries get separated to two multiplicative parts. The first depends on natural coordinates while the second depends also on element parameters (mesh). Second part is approximated using polynomials and function evaluations at sampling (integration) points, allowing later analytical integration to precompute the weight matrices. Resulting formulas possess typical form such that computational efficiency equivalence to traditional schemes is demonstrated, namely our n-point formula is computationally equivalent to the conventional use of n-point quadrature. Specifically, one and four-point semi-analytical formulas are explicitly derived for an eight node brick element. Our one-point rule describes exactly constant metric and density elements; four-point scheme correctly admits the linear metric density multiplication. Dramatic superiority in terms of accuracy is established based on coarse mesh study. Wherefore test sets are generated with the help of ABAQUS, and then analyzed via variety of formulas. Authors of the report intend to achieve the next goals: * Introduction of an alternative way to compute the mass matrix of solid finite elements, including inhomogeneous continua, consistent as well as inconsistent mass matrices. * New easy-to-implement, efficient, formulas specified for widely-used eight-node brick element. * Demonstration of accuracy advantage based on coarse mesh generated with commercial software.

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑