Barrier coverage is a critical issue in wireless sensor networks for many practical applications,e.g., national border monitoring, security surveillance and intruder detection, etc. Its aim is to detect intruders that attempt to cross the protected region. In this paper, we study how to efficiently improve barrier coverage using mobile camera sensors, where camera sensors are deployed by a grid-based strategy.
Network coverage is one of the fundamental requirements of any business of a service provider. Mobile operators are expected to deploy base stations in an effective way in order to cover most of the residential areas of a particular country. Improved network coverage leads to increase total revenue, provide end users with enhanced Quality of Services QoS anytime anywhere, and play vital role in the development of telecom sector. In this paper, we measure and statistically analyze network coverage of mobile operators in Afghanistan. Our study is based on primary data collected on random basis f…
In this paper we study the dynamic aspects of the coverage of a mobile sensor network resulting from continuous movement of sensors. As sensors move around, initially uncovered locations are likely to be covered at a later time. A larger area is covered as time continues, and intruders that might never be detected in a stationary sensor network can now be detected by moving sensors. However, this improvement in coverage is achieved at the cost that a location is covered only part of the time, alternating between covered and not covered. We characterize area coverage at specific time instants a…
In this work, we study the target detection and tracking problem in mobile sensor networks, where the performance metrics of interest are probability of detection and tracking coverage, when the target can be stationary or mobile and its duration is finite. We propose a physical coverage-based mobility model, where the mobile sensor nodes move such that the overlap between the covered areas by different mobile nodes is small. It is shown that for stationary target scenario the proposed mobility model can achieve a desired detection probability with a significantly lower number of mobile nodes …
A self-repelling random walk of a token on a graph is one in which at each step, the token moves to a neighbor that has been visited least often (with ties broken randomly). The properties of self-repelling random walks have been analyzed for two dimensional lattices and these walks have been shown to exhibit a remarkable uniformity with which they visit nodes in a graph. In this paper, we extend this analysis to self-repelling random walks on mobile networks in which the underlying graph itself is temporally evolving. Using network simulations in ns-3, we characterize the number of times each…
Recent works on WSNs show that use of mobile sink can prolong network lifetime. This paper demonstrates the advantages of the mobile sink in WSNs for increasing their lifetime than static sink. A novel sink mobility with coverage algorithm has been proposed here. During the movement of the sinks in the network, they sojourn at different points in the network and collect data over there. The direction of the movement of the sinks is determined by the algorithm and sinks are mobile inside the network. This algorithm can also be used for multiple sinks partitioned network. Simulations has been ca…
Mobile sensor networks (MSNs) have emerged from the interaction between mobile robotics and wireless sensor networks. MSNs can be deployed in harsh environments, where failures in some nodes can partition MSNs into disconnected network segments or reduce the coverage area. A k-connected network can tolerate at least k-1 arbitrary node failures without losing its connectivity. In this study, we present a coverage-aware distributed k-connectivity maintenance (restoration) algorithm that generates minimum-cost movements of active nodes after a node failure to preserve a persistent k value subject…
A mobile sensor network is a wireless network of sensor nodes that move arbitrarily. In this paper, we explore the use of a maximum stability spanning tree-based data gathering (Max.Stability-DG) algorithm and a minimum-distance spanning tree-based data gathering (MST-DG) algorithm for mobile sensor networks. We analyze the impact of these two algorithms on the node failure times and the resulting coverage loss due to node failures. Both the Max.Stability-DG and MST-DG algorithms are based on a greedy strategy of determining a data gathering tree when one is needed and using that tree as long …
Wireless Local Area Networks (WLANs), known as Wi-Fi, have become an essential service in university environments that helps staff, students and guests to access connectivity to the Internet from their mobile devices. Apart from the Internet being a learning resource, students also submit their assignments online using web portals. Most campuses will have poor coverage areas for mobile networks and, as a result, the ability of the wireless network to supplement Internet access for mobile devices in these areas becomes more important. Acquiring clear understanding of WLAN traffic patterns, netw…
Unmanned aerial vehicle (UAV) networks are convinced as a significant part of 5G and emerging 6G wireless networks. UAV slicing is a promising proposal of converging different services onto a common UAV network without deploying individual network solution for each type of service. This paper is concerned with UAV slicing for providing energy-efficient and fair service coverage for enhanced mobile broadband (eMBB) users (UEs). Aiming at physically configuring UAV slices, the UAV slicing problem is formulated as a time-dependent mixed-integer-non-convex programming problem with a goal of maximi…
Wireless rechargeable sensor networks, consisting of sensor nodes with rechargeable batteries and mobile chargers to replenish their batteries, have gradually become a promising solution to the bottleneck of energy limitation that hinders the wide deployment of wireless sensor networks (WSN). In this paper, we focus on the mobile charger scheduling and path optimization scenario in which the $k$-coverage ability of a network system needs to be maintained. We formulate the optimal $k$-coverage charging problem of finding a feasible path for a mobile charger to charge a set of sensor nodes withi…
Network capacity region is an important character of mobile ad hoc networks. Using cell-partitioned model, an expression of upper bound of delay-tolerant hybrid mobile ad hoc network is deduced regardless of coverage of base stations, types of mobile process, scheduling and routing algorithms. The limitation of the upper bound is derived, Analysis of the limitation of upper bound is carried out when the steady-state follows even-distribution law. The relationship among limitation of capacity, the node density and coverage of base station is analyzed.
Deploying relays and/or mobile base stations is a major means of extending the coverage of a wireless network. This paper presents models, analytical results, and algorithms to answer two related questions: The first is where to deploy relays in order to extend the reach from a base station to the maximum; the second is where to deploy a mobile base station and how many relays are needed to reach any point in a given area. Simple time-division and frequency-division scheduling schemes as well as an end-to-end data rate requirement are assumed. An important use case of the results is in the Pub…
The rapid deployment of wireless sensor network (WSN) poses the challenge of finding optimal locations for the network nodes, especially so in (i) unknown and (ii) obstacle-rich environments. This paper addresses this challenge with BISON (Bio-Inspired Self-Organizing Network), a variant of the Voronoi algorithm. In line with the scenario challenges, BISON nodes are restricted to (i) locally sensed as well as (ii) noisy information on the basis of which they move, avoid obstacles and connect with neighboring nodes. Performance is measured as (i) the percentage of area covered, (ii) the total d…
Contemporary Virtual Reality (VR) setups commonly consist of a Head-Mounted Display (HMD) tethered to a content-generating server. "Cutting the wire" in such setups and going truly wireless will require a wireless network capable of delivering enormous amounts of video data at an extremely low latency. Higher frequencies, such as the millimeter-wave (mmWave) band, can support these requirements. Due to high attenuation and path loss in the mmWave frequencies, beamforming is essential. For VR setups, beamforming must adapt in real-time to the user's head rotations, but can rely on the HMD's bui…
Mobile sensor networks are important for several strategic applications devoted to monitoring critical areas. In such hostile scenarios, sensors cannot be deployed manually and are either sent from a safe location or dropped from an aircraft. Mobile devices permit a dynamic deployment reconfiguration that improves the coverage in terms of completeness and uniformity. In this paper we propose a distributed algorithm for the autonomous deployment of mobile sensors called Push&Pull. According to our proposal, movement decisions are made by each sensor on the basis of locally available information…
For seamless QoS, it is important that all the stakeholders, such as the hosts, applications, access networks, routers, and other middleboxes, follow a single protocol and they trust each other. In this article, we investigate the participation of these entities in providing QoS over wireless networks in light of DiffServ QoS architecture. We initiate the study by investigating WiFi and Cellular network traces, which further motivates us a thorough investigation of these stakeholders with empirical measurements. Our findings are the followings. (i) Modern mobile VoIP applications request QoS t…
One of the core technologies being standardized by 3GPP for LTE-A is the introduction of Relay Nodes (RNs). RNs are intended for ensuring coverage at cell edges as well as for the provision of enhanced capacity at hot spot areas. An extension to this concept is the Mobile Relay (MR). MRs can be mounted on vehicles and the original idea is to serve users inside high speed trains thus counter fighting the inherent severe fading and vehicle penetration loss. In this work we present a framework for exploiting Mobile Relay (MRs) even at low speeds in urban environments for bypassing traffic from ne…
The performance of a cellular network can be significantly improved by employing many base stations (BSs), which shortens transmission distances. However, there exist no known results on quantifying the performance gains from deploying many BSs. To address this issue, we adopt a stochastic-geometry model of the downlink cellular network and analyze the mobile outage probability. Specifically, given Poisson distributed BSs, the outage probability is shown to diminish inversely with the increasing ratio between the BS and mobile densities. Furthermore, we analyze the optimal tradeoff between the…
Self Organizing Networks (SONs) are considered as vital deployments towards upcoming dense cellular networks. From a mobile carrier point of view, continuous coverage optimization is critical for better user perceptions. The majority of SON contributions introduce novel algorithms that optimize specific performance metrics. However, they require extensive processing delays and advanced knowledge of network statistics that may not be available. In this work, a progressive Autonomous Coverage Optimization (ACO) method combined with adaptive cell dimensioning is proposed. The proposed method emph…
The emerging technology of wireless sensor network (WSN) is expected to provide a broad range of applications, such as battlefield surveillance, environmental monitoring, smart spaces and so on. The coverage problem is a fundamental issue in WSN, which mainly concerns with a fundamental question: How well a sensor field is observed by the deployed sensors? Mobility is exploited to improve area coverage in a kind of hybrid sensor networks. The main objective for using mobile sensor nodes is to heal coverage holes after the initial network deployment, when designing a hole healing algorithm, the…
In this paper, we first remodel the line coverage as a 1D discrete problem with co-linear targets. Then, an order-based greedy algorithm, called OGA, is proposed to solve the problem optimally. It will be shown that the existing order in the 1D modeling, and especially the resulted Markov property of the selected sensors can help design greedy algorithms such as OGA. These algorithms demonstrate optimal/efficient performance and have lower complexity compared to the state-of-the-art. Furthermore, it is demonstrated that the conventional continuous line coverage problem can be converted to an e…
Understanding and improving mobile broadband deployment is critical to bridging the digital divide and targeting future investments. Yet accurately mapping mobile coverage is challenging. In 2019, the Federal Communications Commission (FCC) released a report on the progress of mobile broadband deployment in the United States. This report received a significant amount of criticism with claims that the cellular coverage, mainly available through Long-Term Evolution (LTE), was over-reported in some areas, especially those that are rural and/or tribal [12]. We evaluate the validity of this critici…
Heinz Nixdorf Institute, University of Paderborn（帕德博恩大学海因茨·尼克斯多夫研究所）；University of Paderborn（帕德博恩大学）
Maintaining connectivity among a group of autonomous agents exploring an area is very important, as it promotes cooperation between the agents and also helps message exchanges which are very critical for their mission. Creating an underlying Ad-hoc Mobile Router Network (AMRoNet) using simple robotic routers is an approach that facilitates communication between the agents without restricting their movements. We address the following question in our paper: How to create an AMRoNet with local information and with minimum number of routers? We propose two new localized and distributed algorithms …
Ensuring seamless coverage accounts for the lion's share of the energy consumed in a mobile network. Overlapping coverage of three to five mobile network operators (MNOs) results in enormous amount of energy waste which is avoidable. The traffic demands of the mobile networks vary significantly throughout the day. As the offered load for all networks are not same at a given time and the differences in energy consumption at different loads are significant, multi-MNO capacity/coverage sharing can dramatically reduce energy consumption of mobile networks and provide the MNOs a cost effective mean…
We experience a major paradigm change in mobile networks. The infrastructure of cellular networks becomes mobile as it is densified by using mobile and nomadic small cells to increase coverage and capacity. Furthermore, the innovative approaches such as green operation through sleep scheduling, user-controlled small cells, and end-to-end slicing will make the network highly dynamic. Mobile cells, while bringing many benefits, introduce many unconventional challenges that we present in this paper. We have to introduce novel techniques for adapting network functions, communication protocols and …
The emerging technologies related to mobile data especially CDR data has great potential for mobility and transportation applications. However, it presents some challenges due to its spatio-temporal characteristics and sparseness. Therefore, in this article, we introduced a new model to refine the positioning accuracy of mobile devices using only CDR data and coverage areas locations. The adopted method has three steps: first, we discovered which model of movement (Move, Stay) is associated with the coverage areas where the mobile device was connected using a Kalman filter. Then, simultaneousl…
This letter proposes an analytical framework to evaluate the coverage performance of a cellular-connected unmanned aerial vehicle (UAV) network in which UAV user equipments (UAV-UEs) are equipped with directional antennas and move according to a three-dimensional (3D) mobility model. The ground base stations (GBSs) equipped with practical down-tilted antennas are distributed according to a Poisson point process (PPP). With tools from stochastic geometry, we derive the handover probability and coverage probability of a random UAV-UE under the strongest average received signal strength (RSS) ass…
Over the years, vertical handover necessity estimation has attracted the interest of numerous researchers. Despite the attractive benefits of integrating different wireless platforms, mobile users are confronted with the issue of detrimental handover. This paper used extensive geometric and probability analysis in modelling the coverage area of a WLAN cell. Thus, presents a realistic and novel model with an attempt to minimize unnecessary handover and handover failure of a mobile node (MN) traversing the WLAN cell from a third generation (3G) network. The dwell time is estimated along with the…
Unmanned aerial vehicle (UAV)-assisted communication is a promising technology in future wireless communication networks. UAVs can not only help offload data traffic from ground base stations (GBSs), but also improve the quality of service of cell-edge users (CEUs). In this paper, we consider the enhancement of cell-edge communications through a mobile relay, i.e., UAV, in multi-cell networks. During each transmission period, GBSs first send data to the UAV, and then the UAV forwards its received data to CEUs according to a certain association strategy. In order to maximize the sum rate of all…
With the advent of 4G, there has been a huge consumption of data and the availability of mobile networks has become paramount. Also, with the burst of network traffic based on user consumption, data availability and network anomalies have increased substantially. In this paper, we introduce a novel approach, to identify the regions that have poor network connectivity thereby providing feedback to both the service providers to improve the coverage as well as to the customers to choose the network judiciously. In addition to this, the solution enables customers to navigate to a better mobile net…
Connectivity and coverage are two crucial problems for wireless sensor networks. Several studies have focused on proposing solutions for improving and adjusting the initial deployment of a wireless sensor network to meet these two criteria. In our work, we propose a new hierarchical architecture for sensor networks that facilitates the gathering of redundancy information of the topology. Several mobile robots must then relocate, in an optimized way, redundant sensors to achieve optimal connectivity and coverage of the network. Mobile robots have to cooperate and coordinate their movement. A pe…
Next generation mobile networks will rely ever more heavily on resource sharing. In this article we study the sharing of radio access network and spectrum among mobile operators. We assess the impact of sharing these two types of resources on the performance of spatially distributed mobile networks. We apply stochastic geometry to observe the combined effect of, for example, the level of spatial clustering among the deployed base stations, the shared network size, or the coordination in shared spectrum use on network coverage and expected user data rate. We uncover some complex effects of mobi…
Wireless access points on unmanned aerial vehicles (UAVs) are being considered for mobile service provisioning in commercial networks. To be able to efficiently use these devices in cellular networks it is necessary to first have a qualitative and quantitative understanding of how their design parameters reflect on the service quality experienced by the end user. In this paper we set up a scenario where a network of UAVs operating at a certain height above ground provide wireless service within coverage areas shaped by their directional antennas. We provide an analytical expression for the cov…
In mobile networks, users may lose coverage when entering a building due to the high signal attenuation at windows and walls. Under such conditions, services with minimum bit-rate requirements, such as video streaming, often show poor Quality-of-Experience (QoE). We will present a Bayesian detector that combines measurements from two Smartphone sensors to decide if a user is inside a building or not. Based on this coverage classification, we will propose an HTTP adaptive streaming (HAS) algorithm to increase playback stability at a high average bitrate. Measurements in a typical office buildin…
Network-Wide Broadcast (NWB) is a common operation in Mobile Ad hoc Networks (MANETs) used by routing protocols to discover routes and in group communication operations. NWB is commonly performed via flooding, which has been shown to be expensive in dense MANETs because of its high redundancy. Several efforts have targeted reducing the redundancy of floods. In this work, we target another problem that can substantially impact the success of NWBs: since MAC level broadcasts are unreliable, it is possible for critical rebroadcasts to be lost, leading to a significant drop in the node coverage. T…
This paper analyzes the impact of user mobility in multi-tier heterogeneous networks. We begin by obtaining the handoff rate for a mobile user in an irregular cellular network with the access point locations modeled as a homogeneous Poisson point process. The received signal-to-interference-ratio (SIR) distribution along with a chosen SIR threshold is then used to obtain the probability of coverage. To capture potential connection failures due to mobility, we assume that a fraction of handoffs result in such failures. Considering a multi-tier network with orthogonal spectrum allocation among t…
Today, cellular networks have saturated frequencies below 3\,GHz. Because of increasing capacity requirements, 5th generation (5G) mobile networks target the 3.5\,GHz band (3.4 to 3.8\,GHz). Despite its expected wide usage, there is little empirical path loss data and mobile radio network planning experience for the 3.5\,GHz band available. This paper presents the results of rural, suburban, and urban measurement campaigns using a pre-standard 5G prototype testbed operating at 3.5\,GHz, with outdoor as well as outdoor-to-indoor scenarios. Based on the measurement results, path loss models are …
Due to increased security awareness of enterprises for mobile applications operating with sensitive or personal data as well as extended regulations form legislative (the principle of proportionality) various approaches, how to implement (extended) two-factor authentication, multi-factor authentication or virtual private network within enterprise mobile environments to ensure delivery of secure applications, have been developed. Within mobile applications it will not be sufficient to rely on security measures of the individual components or interested parties, an overall concept of a security …
We study a mobile wireless sensor network (MWSN) consisting of multiple mobile sensors or robots. Three key factors in MWSNs, sensing quality, energy consumption, and connectivity, have attracted plenty of attention, but the interaction of these factors is not well studied. To take all the three factors into consideration, we model the sensor deployment problem as a constrained source coding problem. %, which can be applied to different coverage tasks, such as area coverage, target coverage, and barrier coverage. Our goal is to find an optimal sensor deployment (or relocation) to optimize the …
Large-scale mobile traffic analytics is becoming essential to digital infrastructure provisioning, public transportation, events planning, and other domains. Monitoring city-wide mobile traffic is however a complex and costly process that relies on dedicated probes. Some of these probes have limited precision or coverage, others gather tens of gigabytes of logs daily, which independently offer limited insights. Extracting fine-grained patterns involves expensive spatial aggregation of measurements, storage, and post-processing. In this paper, we propose a mobile traffic super-resolution techni…
We take some parts of a theoretical mobility model in a two-dimension grid proposed by Greenlaw and Kantabutra to be our model. The model has eight necessary factors that we commonly use in a mobile wireless network: sources or wireless signal providers, the directions that a source can move, users or mobile devices, the given directions which define a user's movement, the given directions which define a source's movement, source's velocity, source's coverage, and obstacles. However, we include only the sources, source's coverage, and the obstacles in our model. We define Square Grid Points Co…
Every cellular network deployment requires planning and optimization in order to provide adequate coverage, capacity, and quality of service (QoS). Optimization mobile radio network planning is a very complex task, as many aspects must be taken into account. With the rapid development in mobile network we need effective network planning tool to satisfy the need of customers. However, deciding upon the optimum placement for the base stations (BS s) to achieve best services while reducing the cost is a complex task requiring vast computational resource. This paper introduces the spatial clusteri…
