We consider an inverse problem arising in thermo-/photo- acoustic tomography that amounts to reconstructing a function $f$ from its circular or spherical means with the centers lying on a given measurement surface. (Equivalently, these means can be expressed through the solution $u(t,x)$ of the wave equation with the initial pressure equal to $f$.) An explicit solution of this inverse problem is obtained in 3D for the surface that is the boundary of an open octet, and in 2D for the case when the centers of integration circles lie on two rays starting at the origin and intersecting at the angle equal to $π/N$, $N=2,3,4,...$. Our formulas reconstruct the Radon projections of a function closely related to $f$, from the values of $u(t,x)$ on the measurement surface. Then, function $f$ can be found by inverting the Radon transform.
We derive explicit formulas for the reconstruction of a function from its integrals over a family of spheres, or for the inversion of the spherical mean Radon transform. Such formulas are important for problems of thermo- and photo- acoustic tomography. A closed-form inversion formula of a filtration-backprojection type is found for the case when the centers of the integration spheres lie on a sphere in Rn surrounding the support of the unknown function. An explicit series solution is presented for the case when the centers of the integration spheres lie on a general closed surface.
An explicit series solution is proposed for the inversion of the spherical mean Radon transform. Such an inversion is required in problems of thermo- and photo- acoustic tomography. Closed-form inversion formulae are currently known only for the case when the centers of the integration spheres lie on a sphere surrounding the support of the unknown function, or on certain unbounded surfaces. Our approach results in an explicit series solution for any closed measuring surface surrounding a region for which the eigenfunctions of the Dirichlet Laplacian are explicitly known - such as, for example,…
This paper is devoted to a Radon-type transform arising in a version of Photoacoustic Tomography that uses integrating circular detectors. We show that the transform can be decomposed into the spherical Radon transform and the Funk-Minkowski transform. An inversion formula and a range description are obtained by combining existing inversion for- mulas and range descriptions for the spherical Radon transform and the Funk-Minkowski transform. Numerical simulations are performed to demonstrate our proposed algorithm.
Let $\mR$ be the restriction of the spherical Radon transform to the set of spheres centered on a hypersurface $\mS$. We study the inversion of $\mR$ by a closed-form formula. We approach the problem by studying an oscillatory integral, which depends on the observation surface $\mS$ as a parameter. We then derive various microlocal analytic properties of the associated closed-form inversion formula.
The spherical means Radon transform $\mathcal{M}f(x,r)$ is defined by the integral of a function $f$ in $\mathbb{R}^{n}$ over the sphere $S(x,r)$ of radius $r$ centered at a $x$, normalized by the area of the sphere. The problem of reconstructing $f$ from the data $\mathcal{M}f(x,r)$ where $x$ belongs to a hypersurface $Γ\subset\mathbb{R}^{n}$ and $r \in(0,\infty)$ has important applications in modern imaging modalities, such as photo- and thermo- acoustic tomography. When $Γ$ coincides with the boundary $\partialΩ$ of a bounded (convex) domain $Ω\subset\mathbb{R}^{n}$, a function supported wi…
This paper is devoted to a Radon-type transform arising in Photoacoustic Tomography that uses integrating line detectors. We consider two situations: when the line detectors are tangent to the boundary of a cylindrical domain and when the line detectors are located on a plane. We present the analogue of the Fourier slice theorems for each case of the Radon-type transforms. Also, we provide several new inversion formulas, a support theorem, and stability estimate and necessary range condition results.
Image reconstruction from radially incomplete spherical Radon data
University of Texas at Arlington（德克萨斯大学阿灵顿分校）；American University of Sharjah（沙迦美国大学）；Tata Institute of Fundamental Research - Centre for Applicable Mathematics（塔塔基础研究所应用数学中心）；University of Würzburg（维尔茨堡大学）
We study the effect of additive noise to the inversion of FIOs associated to a diffeomorphic canonical relation. We use the microlocal defect measures to measure the power spectrum of the noise and analyze how that power spectrum is transformed under the inversion. In particular, we compute the standard deviation of the noise added to the inversion as a function of the standard deviation of the noise added to the data. As an example, we study the Radon transform in the plane in parallel and fan-beam coordinates, and present numerical examples.
The circular Radon transform integrates a function over the set of all spheres with a given set of centers. The problem of injectivity of this transform (as well as inversion formulas, range descriptions, etc.) arises in many fields from approximation theory to integral geometry, to inverse problems for PDEs, and recently to newly developing types of tomography. The article discusses known and provides new results that one can obtain by methods that essentially involve only the finite speed of propagation and domain dependence for the wave equation.
The transform considered in the paper averages a function supported in a ball in $\RR^n$ over all spheres centered at the boundary of the ball. This Radon type transform arises in several contemporary applications, e.g. in thermoacoustic tomography and sonar and radar imaging. Range descriptions for such transforms are important in all these areas, for instance when dealing with incomplete data, error correction, and other issues. Four different types of complete range descriptions are provided, some of which also suggest inversion procedures. Necessity of three of these (appropriately formula…
The aim of this paper is to present inversion methods for the classical Radon transform which is defined on a family of $k$ dimensional planes in $\Bbb R^{n}$ where $1\leq k\leq n - 2$. For these values of $k$ the dimension of the set $\mathcal{H}(n,k)$, of all $k$ dimensional planes in $\Bbb R^{n}$, is greater than $n$ and thus in order to obtain a well-posed problem one should choose proper subsets of $\mathcal{H}(n,k)$. We present inversion methods for some prescribed subsets of $\mathcal{H}(n,k)$ which are of dimension $n$.
Let $\bbK=\mathbb R, \mathbb C, \mathbb H$ be the field of real, complex or quaternionic numbers and $M_{p, q}(\bbK)$ the vector space of all $p\times q$-matrices. Let $X$ be the matrix unit ball in $M_{n-r, r}(\bbK)$ consisting of contractive matrices. As a symmetric space, $X=G/K=O(n-r, r)/O(n-r)\times O(r)$, $U(n-r, r)/U(n-r)\times U(r)$ and respectively $Sp(n-r, r)/Sp(n-r)\times Sp(r)$. The matrix unit ball $y_0$ in $M_{r^\prime-r, r}$ with $r^\prime \le n-1$ is a totally geodesic submanifold of $X$ and let $Y$ be the set of all $G$-translations of the submanifold $y_0$. The set $Y$ is the…
Many modern imaging and remote sensing applications require reconstructing a function from spherical averages (mean values). Examples include photoacoustic tomography, ultrasound imaging or SONAR. Several formulas of the back-projection type for recovering a function in $n$ spatial dimensions from mean values over spheres centered on a sphere have been derived in [D. Finch, S. K. Patch, and Rakesh, SIAM J. Math. Anal. 35(5), pp. 1213--1240, 2004] for odd spatial dimension and in [D. Finch, M. Haltmeier, and Rakesh, SIAM J. Appl. Math. 68(2), pp. 392--412, 2007] for even spatial dimension. In t…
We study the integral transform over a general family of broken rays in $\mathbb{R}^2$. It is natural for broken rays to have conjugate points, for example, when they are reflected from a curved boundary. If there are conjugate points, we show that the singularities cannot be recovered from local data and therefore artifacts arise in the reconstruction. We apply these conclusions to two examples, the V-line Radon transform and the parallel ray transform. In each example, a detailed discussion of the local and global recovery of singularities is given and we perform numerical experiments to ill…
Practical applications of thermoacoustic tomography require numerical inversion of the spherical mean Radon transform with the centers of integration spheres occupying an open surface. Solution of this problem is needed (both in 2-D and 3-D) because frequently the region of interest cannot be completely surrounded by the detectors, as it happens, for example, in breast imaging. We present an efficient numerical algorithm for solving this problem in 2-D (similar methods are applicable in the 3-D case). Our method is based on the numerical approximation of plane waves by certain single layer pot…
This paper concerns time-harmonic inverse source problems with a single far-field pattern in two dimensions, where the source term is compactly supported in an a priori given inhomogeneous background medium. For convex-polygonal source terms, we prove that the source support together with the zeroth and first order derivatives of the source function at corner points can be uniquely determined. Further, we prove that an admissible set of source functions (including harmonic functions) having a convex-polygonal support can be uniquely identified by a single far-field pattern. A class of radiatin…
The paper contains a simple proof of the Finch-Patch-Rakesh inversion formula for the spherical mean Radon transform in odd dimensions. This transform arises in thermoacoustic tomography. Applications are given to the Cauchy problem for the Euler-Poisson-Darboux equation with initial data on the cylindrical surface. The argument relies on the idea of analytic continuation and known properties of Erdelyi-Kober fractional integrals.
