The recently developed labeled multi-Bernoulli (LMB) filter uses better approximations in its update step, compared to the unlabeled multi-Bernoulli filters, and more importantly, it provides us with not only the estimates for the number of targets and their states, but also with labels for existing tracks. This paper presents a novel sensor-control method to be used for optimal multi-target tracking within the LMB filter. The proposed method uses a task-driven cost function in which both the state estimation errors and cardinality estimation errors are taken into consideration. Simulation results demonstrate that the proposed method can successfully guide a mobile sensor in a challenging multi-target tracking scenario.
This paper focuses on \textit{joint detection, tracking and classification} (JDTC) of a target via multi-sensor fusion. The target can be present or not, can belong to different classes, and depending on its class can behave according to different kinematic modes. Accordingly, it is modeled as a suitably extended Bernoulli \textit{random finite set} (RFS) uniquely characterized by existence, classification, class-conditioned mode and class\&mode-conditioned state probability distributions. By designing suitable centralized and distributed rules for fusing information on target existence, class…
This paper proposes a Poisson multi-Bernoulli mixture (PMBM) filter on the space of sets of tree trajectories for multiple target tracking with spawning targets. A tree trajectory contains all trajectory information of a target and its descendants, which appear due to the spawning process. Each tree contains a set of branches, where each branch has trajectory information of a target or one of the descendants and its genealogy. For the standard dynamic and measurement models with multi-Bernoulli spawning, the posterior is a PMBM density, with each Bernoulli having information on a potential tre…
This paper provides a scalable, multi-sensor measurement adaptive track initiation technique for labeled random finite set filters. A naive construction of the multi-sensor measurement adaptive birth set distribution leads to an exponential number of newborn components in the number of sensors. A truncation criterion is established for a labeled multi-Bernoulli random finite set birth density. The proposed truncation criterion is shown to have a bounded L1 error in the generalized labeled multi-Bernoulli posterior density. This criterion is used to construct a Gibbs sampler that produces a tru…
This paper focuses on the joint multi-object tracking (MOT) and the estimate of detection probability with the \emph{Poisson multi-Bernoulli mixture} (PMBM) filter. In a majority of multi-object scenarios, the knowledge of detection probability is usually uncertain, which is often estimated offline from the training data. In such cases, online filtering is not allowed or believable, otherwise, significate parameter mismatch will result in biased estimates (state and cardinality of objects). Consequently, the ability of adaptively estimating the detection probability is essential in practice. I…
This paper proposes a computationally efficient algorithm for distributed fusion in a sensor network in which multi-Bernoulli (MB) filters are locally running in every sensor node for multi-target tracking. The generalized Covariance Intersection (GCI) fusion rule is employed to fuse multiple MB random finite set densities. The fused density comprises a set of fusion hypotheses that grow exponentially with the number of Bernoulli components. Thus, GCI fusion with MB filters can become computationally intractable in practical applications that involve tracking of even a moderate number of objec…
University of Liverpool（利物浦大学）；Universidad Antonio de Nebrija（安东尼奥·德·内布里哈大学）；University of Electronic Science and Technology of China（电子科技大学）
This paper derives the optimal Bayesian processing of an out-of-sequence (OOS) set of measurements in continuous-time for multiple target tracking. We consider a multi-target system modelled in continuous time that is discretised at the time steps when we receive the measurements, which are distributed according to the standard point target model. All information about this system at the sampled time steps is provided by the posterior density on the set of all trajectories. This density can be computed via the continuous-discrete trajectory Poisson multi-Bernoulli mixture (TPMBM) filter. When …
An efficient, variational approximation of the best fitting multi-Bernoulli filter
National Security, Intelligence, Surveillance and Reconnaissance Division, Defence Science and Technology Organisation（国防科学与技术组织国家安全、情报、监视与侦察司）；School of Electrical and Electronic Engineering, University of Adelaide（阿德莱德大学电气与电子工程学院）
Accurate tracking in urban environments necessitates target birth, survival, and detection models that quantify the impact of terrain and building geometry on the sequential estimation procedure. Current efforts assume that target trajectories are limited to fixed paths, such as road networks. In these settings a single airborne platform with a downward-facing camera is capable of fully observing a target, outside of a few obstructed regions that can be determined a priori (e.g. tunnels). However, many practical target types are not necessarily restricted to road networks and thus require know…
This paper considers the problem of detecting and tracking multiple maneuvering targets, which suffers from the intractable inference of high-dimensional latent variables that include target kinematic state, target visibility state, motion mode-model association, and data association. A unified message passing algorithm that combines belief propagation (BP) and mean-field (MF) approximation is proposed for simplifying the intractable inference. By assuming conjugate-exponential priors for target kinematic state, target visibility state, and motion mode-model association, the MF approximation d…
This paper addresses distributed multi-target tracking (DMTT) over a network of sensors having different fields-of-view (FoVs). Specifically, a cardinality probability hypothesis density (CPHD) filter is run at each sensor node. Due to the fact that each sensor node has a limited FoV, the commonly adopted fusion methods become unreliable. In fact, the monitored area of multiple sensor nodes consists of several parts that are either exclusive of a single node, i.e. exclusive FoVs (eFoVs) or common to multiple (at least two) nodes, i.e. common FoVs (cFoVs). In this setting, the crucial issue is …
Model-based Multi-object Visual Tracking: Identification and Standard Model Limitations
Department of Cybernetics, University of West Bohemia（西波西米亚大学控制系）；Department of Automation, Shanghai Jiaotong University（上海交通大学自动化系）；Signal Processing Group, Chalmers University of Technology（查尔姆斯理工大学信号处理组）
This paper presents an efficient sensor management approach for multi-target tracking in passive sensor networks. Compared with active sensor networks, passive sensor networks have larger uncertainty due to the nature of passive sensing. Multi-target tracking in passive sensor networks is challenging because the multi-sensor multi-target fusion problem is difficult and sensor management is necessary to achieve good trade-offs between tracking accuracy and energy consumption or other costs. To address this problem, we present an efficient information-theoretic approach to manage the sensors for…
This paper describes a technique for the autonomous mission planning of unmanned aerial system swarms. Given a swarm operating in a known area, a central command system generates measurements from the swarm. If those measurements indicate changes to the mission situation such as target movement, the swarm planning is updated to reflect the new situation and guidance updates are broadcast to the swarm. The primary algorithms featured in this work are A* pathfinding and the Generalized Labeled Multi-Bernoulli multi-target tracking method.
