The matching function for the problem of stereo reconstruction or optical flow has been traditionally designed as a function of the distance between the features describing matched pixels. This approach works under assumption, that the appearance of pixels in two stereo cameras or in two consecutive video frames does not change dramatically. However, this might not be the case, if we try to match pixels over a large interval of time.
In this paper we propose a method, which learns the matching function, that automatically finds the space of allowed changes in visual appearance, such as due to the motion blur, chromatic distortions, different colour calibration or seasonal changes. Furthermore, it automatically learns the importance of matching scores of contextual features at different relative locations and scales. Proposed classifier gives reliable estimations of pixel disparities already without any form of regularization.
We evaluated our method on two standard problems - stereo matching on KITTI outdoor dataset, optical flow on Sintel data set, and on newly introduced TimeLapse change detection dataset. Our algorithm obtained very promising results comparable to the state-of-the-art.
Safe autonomous driving requires reliable 3D object detection-determining the 6 DoF pose and dimensions of objects of interest. Using stereo cameras to solve this task is a cost-effective alternative to the widely used LiDAR sensor. The current state-of-the-art for stereo 3D object detection takes the existing PSMNet stereo matching network, with no modifications, and converts the estimated disparities into a 3D point cloud, and feeds this point cloud into a LiDAR-based 3D object detector. The issue with existing stereo matching networks is that they are designed for disparity estimation, not …
Monash University（莫纳什大学）；SenseTime Research（商汤科技研究院）；Shanghai AI Laboratory（上海人工智能实验室）；Data61, CSIRO（澳大利亚联邦科学与工业研究组织Data61）；University of Melbourne（墨尔本大学）；The University of Sydney（悉尼大学）；Monash-Airdoc Research Centre（莫纳什-鹰瞳研究中心）
The self-attention mechanism, successfully employed with the transformer structure is shown promise in many computer vision tasks including image recognition, and object detection. Despite the surge, the use of the transformer for the problem of stereo matching remains relatively unexplored. In this paper, we comprehensively investigate the use of the transformer for the problem of stereo matching, especially for laparoscopic videos, and propose a new hybrid deep stereo matching framework (HybridStereoNet) that combines the best of the CNN and the transformer in a unified design. To be specifi…
Univrses AB；KTH Royal Institute of Technology（瑞典皇家理工学院）；University of Bologna（博洛尼亚大学）
Scene understanding is paramount in robotics, self-navigation, augmented reality, and many other fields. To fully accomplish this task, an autonomous agent has to infer the 3D structure of the sensed scene (to know where it looks at) and its content (to know what it sees). To tackle the two tasks, deep neural networks trained to infer semantic segmentation and depth from stereo images are often the preferred choices. Specifically, Semantic Stereo Matching can be tackled by either standalone models trained for the two tasks independently or joint end-to-end architectures. Nonetheless, as propos…
University of Kansas（堪萨斯大学）；Ryerson University（瑞尔森大学）
The paper proposes a light-weighted stereo frustums matching module for 3D objection detection. The proposed framework takes advantage of a high-performance 2D detector and a point cloud segmentation network to regress 3D bounding boxes for autonomous driving vehicles. Instead of performing traditional stereo matching to compute disparities, the module directly takes the 2D proposals from both the left and the right views as input. Based on the epipolar constraints recovered from the well-calibrated stereo cameras, we propose four matching algorithms to search for the best match for each propo…
School of Information Science and Engineering, Shandong University（山东大学信息科学与工程学院）；College of Geomatics, Shandong University of Science and Technology（山东科技大学测绘学院）；Shenzhen Research Institute, Shandong University（山东大学深圳研究院）；School of Control Science and Engineering, Shandong University（山东大学控制科学与工程学院）
In deep learning-based local stereo matching methods, larger image patches usually bring better stereo matching accuracy. However, it is unrealistic to increase the size of the image patch size without restriction. Arbitrarily extending the patch size will change the local stereo matching method into the global stereo matching method, and the matching accuracy will be saturated. We simplified the existing Siamese convolutional network by reducing the number of network parameters and propose an efficient CNN based structure, namely Adaptive Deconvolution-based disparity matching Net (ADSM net) …
STEREOFLOW: Progressive Stereo Matching with StereoDiT and Transition Flow Matching
School of Computer Science and Engineering, Beihang University（北京航空航天大学计算机科学与工程学院）；University of California, Berkeley（加州大学伯克利分校）；University of Southern California（南加州大学）；Google（谷歌公司）；State Key Laboratory of Intelligent Manufacturing Equipment and Technology, Huazhong University of Science and Technology（华中科技大学智能制造装备与技术国家重点实验室）；Tencent（腾讯公司）；GigaAI（极佳科技）
We introduce RAFT-Stereo, a new deep architecture for rectified stereo based on the optical flow network RAFT. We introduce multi-level convolutional GRUs, which more efficiently propagate information across the image. A modified version of RAFT-Stereo can perform accurate real-time inference. RAFT-stereo ranks first on the Middlebury leaderboard, outperforming the next best method on 1px error by 29% and outperforms all published work on the ETH3D two-view stereo benchmark. Code is available at https://github.com/princeton-vl/RAFT-Stereo.
The complementary characteristics of active and passive depth sensing techniques motivate the fusion of the Li-DAR sensor and stereo camera for improved depth perception. Instead of directly fusing estimated depths across LiDAR and stereo modalities, we take advantages of the stereo matching network with two enhanced techniques: Input Fusion and Conditional Cost Volume Normalization (CCVNorm) on the LiDAR information. The proposed framework is generic and closely integrated with the cost volume component that is commonly utilized in stereo matching neural networks. We experimentally verify the…
Institute of Information Engineering, Chinese Academy of Sciences（中国科学院信息工程研究所）；University of Chinese Academy of Sciences（中国科学院大学）
Stereo matching is an essential basis for various applications, but most stereo matching methods have poor generalization performance and require a fixed disparity search range. Moreover, current stereo matching methods focus on the scenes that only have positive disparities, but ignore the scenes that contain both positive and negative disparities, such as 3D movies. In this paper, we present a new stereo matching pipeline that first computes semi-dense disparity maps based on binocular disparity, and then completes the rest depending on monocular cues. The new stereo matching pipeline have t…
Chinese University of Hong Kong（香港中文大学）；SenseTime Research（商汤科技研究院）
Large-scale synthetic datasets are beneficial to stereo matching but usually introduce known domain bias. Although unsupervised image-to-image translation networks represented by CycleGAN show great potential in dealing with domain gap, it is non-trivial to generalize this method to stereo matching due to the problem of pixel distortion and stereo mismatch after translation. In this paper, we propose an end-to-end training framework with domain translation and stereo matching networks to tackle this challenge. First, joint optimization between domain translation and stereo matching networks in…
Memorial University of Newfoundland（纽芬兰纪念大学）；Dalian University of Technology（大连理工大学）
A robust solution for semi-dense stereo matching is presented. It utilizes two CNN models for computing stereo matching cost and performing confidence-based filtering, respectively. Compared to existing CNNs-based matching cost generation approaches, our method feeds additional global information into the network so that the learned model can better handle challenging cases, such as lighting changes and lack of textures. Through utilizing non-parametric transforms, our method is also more self-reliant than most existing semi-dense stereo approaches, which rely highly on the adjustment of param…
In the paper, region based stereo matching algorithms are developed for extraction depth information from two color stereo image pair. A filter eliminating unreliable disparity estimation was used for increasing reliability of the disparity map. Obtained results by algorithms were represented and compared.
College of Big Data and Internet, Shenzhen Technology University（深圳技术大学大数据与互联网学院）；College of Computer Science and Software Engineering, Shenzhen University（深圳大学计算机科学与软件工程学院）
Stereo matching is crucial for binocular stereo vision. Existing methods mainly focus on simple disparity map fusion to improve stereo matching, which require multiple dense or sparse disparity maps. In this paper, we propose a simple yet novel scheme, termed feature disparity propagation, to improve general stereo matching based on matching cost volume and sparse matching feature points. Specifically, our scheme first calculates a reliable sparse disparity map by local feature matching, and then refines the disparity map by propagating reliable disparities to neighboring pixels in the matchin…
In this paper, we present a novel approach to detect ground control points (GCPs) for stereo matching problem. First of all, we train a convolutional neural network (CNN) on a large stereo set, and compute the matching confidence of each pixel by using the trained CNN model. Secondly, we present a ground control points selection scheme according to the maximum matching confidence of each pixel. Finally, the selected GCPs are used to refine the matching costs, and we apply the new matching costs to perform optimization with semi-global matching algorithm for improving the final disparity maps. …
Stereo Matching is one of the classical problems in computer vision for the extraction of 3D information but still controversial for accuracy and processing costs. The use of matching techniques and cost functions is crucial in the development of the disparity map. This paper presents a comparative study of six different stereo matching algorithms including Block Matching (BM), Block Matching with Dynamic Programming (BMDP), Belief Propagation (BP), Gradient Feature Matching (GF), Histogram of Oriented Gradient (HOG), and the proposed method. Also three cost functions namely Mean Squared Error…
ShanghaiTech University（上海科技大学）；University of Delaware（特拉华大学）
Depth from defocus (DfD) and stereo matching are two most studied passive depth sensing schemes. The techniques are essentially complementary: DfD can robustly handle repetitive textures that are problematic for stereo matching whereas stereo matching is insensitive to defocus blurs and can handle large depth range. In this paper, we present a unified learning-based technique to conduct hybrid DfD and stereo matching. Our input is image triplets: a stereo pair and a defocused image of one of the stereo views. We first apply depth-guided light field rendering to construct a comprehensive traini…
University of Surrey（萨里大学）；Vicon Motion Systems Ltd.（Vicon运动系统有限公司）
Existing methods for stereo work on narrow baseline image pairs giving limited performance between wide baseline views. This paper proposes a framework to learn and estimate dense stereo for people from wide baseline image pairs. A synthetic people stereo patch dataset (S2P2) is introduced to learn wide baseline dense stereo matching for people. The proposed framework not only learns human specific features from synthetic data but also exploits pooling layer and data augmentation to adapt to real data. The network learns from the human specific stereo patches from the proposed dataset for wide…
Stereo Anywhere: Robust Zero-Shot Deep Stereo Matching Even Where Either Stereo or Mono Fail
Advanced Research Center on Electronic System (ARCES)（电子系统高级研究中心）；Department of Computer Science and Engineering (DISI)（计算机科学与工程系）；University of Bologna（博洛尼亚大学）
Beijing University of Technology（北京工业大学）；University College Dublin（都柏林大学）；ADAPT SFI Research Centre（ADAPT科学基金会爱尔兰研究中心）；Beijing-Dublin International College（北京-都柏林国际学院）
The area of computer vision is one of the most discussed topics amongst many scholars, and stereo matching is its most important sub fields. After the parallax map is transformed into a depth map, it can be applied to many intelligent fields. In this paper, a stereo matching algorithm based on visual sensitive information is proposed by using standard images from Middlebury dataset. Aiming at the limitation of traditional stereo matching algorithms regarding the cost window, a cost aggregation algorithm based on the dynamic window is proposed, and the disparity image is optimized by using left…
Stereo dense image matching can be categorized to low-level feature based matching and deep feature based matching according to their matching cost metrics. Census has been proofed to be one of the most efficient low-level feature based matching methods, while fast Convolutional Neural Network (fst-CNN), as a deep feature based method, has small computing time and is robust for satellite images. Thus, a comparison between fst-CNN and census is critical for further studies in stereo dense image matching. This paper used cost function of fst-CNN and census to do stereo matching, then utilized se…
In this paper, we present a decomposition model for stereo matching to solve the problem of excessive growth in computational cost (time and memory cost) as the resolution increases. In order to reduce the huge cost of stereo matching at the original resolution, our model only runs dense matching at a very low resolution and uses sparse matching at different higher resolutions to recover the disparity of lost details scale-by-scale. After the decomposition of stereo matching, our model iteratively fuses the sparse and dense disparity maps from adjacent scales with an occlusion-aware mask. A re…
Beihang University（北京航空航天大学）；RIKEN AIP（理化学研究所先进智能项目中心）；The University of Tokyo（东京大学）；Griffith University（格里菲斯大学）；University of York（约克大学）
Despite recent stereo matching networks achieving impressive performance given sufficient training data, they suffer from domain shifts and generalize poorly to unseen domains. We argue that maintaining feature consistency between matching pixels is a vital factor for promoting the generalization capability of stereo matching networks, which has not been adequately considered. Here we address this issue by proposing a simple pixel-wise contrastive learning across the viewpoints. The stereo contrastive feature loss function explicitly constrains the consistency between learned features of match…
MC-Stereo: Multi-peak Lookup and Cascade Search Range for Stereo Matching
SenseTime Research（商汤科技研究院）；Rutgers University（罗格斯大学）；School of EIC, Huazhong University of Science and Technology（华中科技大学电子信息与通信学院）；Google Research（谷歌研究院）；Academy of Military Sciences, Beijing, China（中国人民解放军军事科学院）
In this paper, we propose a novel binary-based cost computation and aggregation approach for stereo matching problem. The cost volume is constructed through bitwise operations on a series of binary strings. Then this approach is combined with traditional winner-take-all strategy, resulting in a new local stereo matching algorithm called binary stereo matching (BSM). Since core algorithm of BSM is based on binary and integer computations, it has a higher computational efficiency than previous methods. Experimental results on Middlebury benchmark show that BSM has comparable performance with sta…
Huazhong University of Science and Technology（华中科技大学）
Recurrent All-Pairs Field Transforms (RAFT) has shown great potentials in matching tasks. However, all-pairs correlations lack non-local geometry knowledge and have difficulties tackling local ambiguities in ill-posed regions. In this paper, we propose Iterative Geometry Encoding Volume (IGEV-Stereo), a new deep network architecture for stereo matching. The proposed IGEV-Stereo builds a combined geometry encoding volume that encodes geometry and context information as well as local matching details, and iteratively indexes it to update the disparity map. To speed up the convergence, we exploit…
Beihang University（北京航空航天大学）；SenseTime Research（商汤科技研究院）；The Chinese University of Hong Kong（香港中文大学）
Unsupervised cross-spectral stereo matching aims at recovering disparity given cross-spectral image pairs without any supervision in the form of ground truth disparity or depth. The estimated depth provides additional information complementary to individual semantic features, which can be helpful for other vision tasks such as tracking, recognition and detection. However, there are large appearance variations between images from different spectral bands, which is a challenge for cross-spectral stereo matching. Existing deep unsupervised stereo matching methods are sensitive to the appearance v…
Disparity by Block Matching stereo is usually used in applications with limited computational power in order to get depth estimates. However, the research on simple stereo methods has been lesser than the energy based counterparts which promise a better quality depth map with more potential for future improvements. Semi-global-matching (SGM) methods offer good performance and easy implementation but suffer from the problem of very high memory footprint because it's working on the full disparity space image. On the other hand, Block matching stereo needs much less memory. In this paper, we intr…
Orbbec Research（奥比中格研究院）；Hefei University of Technology（合肥工业大学）；Sun Yat-sen University（中山大学）
Real-time performance of stereo matching networks is important for many applications, such as automatic driving, robot navigation and augmented reality (AR). Although significant progress has been made in stereo matching networks in recent years, it is still challenging to balance real-time performance and accuracy. In this paper, we present a novel edge-preserving cost volume upsampling module based on the slicing operation in the learned bilateral grid. The slicing layer is parameter-free, which allows us to obtain a high quality cost volume of high resolution from a low-resolution cost volu…
Deep learning (DL) stereo matching methods gained great attention in remote sensing satellite datasets. However, most of these existing studies conclude assessments based only on a few/single stereo images lacking a systematic evaluation on how robust DL methods are on satellite stereo images with varying radiometric and geometric configurations. This paper provides an evaluation of four DL stereo matching methods through hundreds of multi-date multi-site satellite stereo pairs with varying geometric configurations, against the traditional well-practiced Census-SGM (Semi-global matching), to c…
Huazhong University of Science & Technology（华中科技大学）；Wuhan National Laboratory for Optoelectronics（武汉国家光电实验室）
Stereo matching is a fundamental building block for many vision and robotics applications. An informative and concise cost volume representation is vital for stereo matching of high accuracy and efficiency. In this paper, we present a novel cost volume construction method which generates attention weights from correlation clues to suppress redundant information and enhance matching-related information in the concatenation volume. To generate reliable attention weights, we propose multi-level adaptive patch matching to improve the distinctiveness of the matching cost at different disparities ev…
École Supérieure de Technologie et d’Informatique（高等技术与信息学院）；Université de Carthage（迦太基大学）
This paper presents a genetic stereo matching algorithm with fuzzy evaluation function. The proposed algorithm presents a new encoding scheme in which a chromosome is represented by a disparity matrix. Evolution is controlled by a fuzzy fitness function able to deal with noise and uncertain camera measurements, and uses classical evolutionary operators. The result of the algorithm is accurate dense disparity maps obtained in a reasonable computational time suitable for real-time applications as shown in experimental results.
In this paper, we contrive a stereo matching algorithm with careful handling of disparity, discontinuity and occlusion. This algorithm works a worldwide matching stereo model which is based on minimization of energy. The global energy comprises two terms, firstly the data term and secondly the smoothness term. The data term is approximated by a color-weighted correlation, then refined in obstruct and low-texture areas in many applications of hierarchical loopy belief propagation algorithm. The results during the experiment are evaluated on the Middlebury data sets, showing that out algorithm i…
In this paper, we present Shift Convolution Network (ShiftConvNet) to provide matching capability between two feature maps for stereo estimation. The proposed method can speedily produce a highly accurate disparity map from stereo images. A module called shift convolution layer is proposed to replace the traditional correlation layer to perform patch comparisons between two feature maps. By using a novel architecture of convolutional network to learn the matching process, ShiftConvNet can produce better results than DispNet-C[1], also running faster with 5 fps. Moreover, with a proposed auto s…
College of Electronics and Information Engineering, Tongji University（同济大学电子信息工程学院）；Harbin Institute of Technology Suzhou Research Institute（哈尔滨工业大学苏州研究院）；Department of Computer Science and Technology, Tongji University（同济大学计算机科学与技术系）；Multimedia Technology and Telecom Department, Telecommunications Center, Moscow Institute of Physics（莫斯科物理技术学院多媒体技术与电信系、电信中心）
In [18], Mozerov et al. propose to perform stereo matching as a two-step energy minimization problem. For the first step they solve a fully connected MRF model. And in the next step the marginal output is employed as the unary cost for a locally connected MRF model. In this paper we intend to combine the two steps of energy minimization in order to improve stereo matching results. We observe that the fully connected MRF leads to smoother disparity maps, while the locally connected MRF achieves superior results in fine-structured regions. Thus we propose to jointly solve the fully connected and…
Huazhong University of Science and Technology（华中科技大学）
In this paper, we propose CGI-Stereo, a novel neural network architecture that can concurrently achieve real-time performance, competitive accuracy, and strong generalization ability. The core of our CGI-Stereo is a Context and Geometry Fusion (CGF) block which adaptively fuses context and geometry information for more effective cost aggregation and meanwhile provides feedback to feature learning to guide more effective contextual feature extraction. The proposed CGF can be easily embedded into many existing stereo matching networks, such as PSMNet, GwcNet and ACVNet. The resulting networks sh…
Recently, there are emerging many stereo matching methods for autonomous driving based on unsupervised learning. Most of them take advantage of reconstruction losses to remove dependency on disparity groundtruth. Occlusion handling is a challenging problem in stereo matching, especially for unsupervised methods. Previous unsupervised methods failed to take full advantage of geometry properties in occlusion handling. In this paper, we introduce an effective way to detect occlusion regions and propose a novel unsupervised training strategy to deal with occlusion that only uses the predicted left…
