arXivDaily arXiv每日学术速递 周一至周五更新
arXiv 1410.0401physics.chem-ph
收藏

在发动机相关条件下有效的汽油替代品的简化化学

Reduced chemistry for a gasoline surrogate valid at engine-relevant conditions

Kyle E. Niemeyer, Chih-Jen Sung

摘要:

劳伦斯利弗莫尔国家实验室开发的四组分RD 387汽油替代品的详细机理与发动机相关条件下的实验结果吻合良好。然而,有1388种物质和5933个可逆反应,这个详细的机制太大了,无法用于实际的发动机模拟。因此,使用由DRGEPSA方法、不重要反应消除、异构体集总和基于CSP分析的分析QSS减少组成的多阶段方法来进行详细机制的减少。一种新的贪婪灵敏度分析算法的开发和证明是能够删除更多的物种相同的误差限制相比,传统的灵敏度分析用于DRG为基础的骨骼减少方法。使用这种新的贪婪算法,几个骨架和减少机制,在不同的复杂程度和不同的目标条件范围。最终的骨骼和减少的机制包括213和148种,分别为一个精益化学计量,低温HCCI样的条件范围。对于一个贫到富,高温,SI/CI-样的条件范围内,骨骼和减少机制分别与97和79种。本研究中的骨架和简化机制使用10%的误差限产生,并使用发动机相关条件下的均质自燃模拟进行验证-所有这些都在预测点火延迟方面表现出良好的一致性。此外,扩展验证进行,包括自燃温度曲线,PSR温度响应曲线和熄灭转折点的比较,和层流火焰速度计算。所有扩展验证均显示结果在10%的误差限度内,证明了所得还原化学的充分性。

英文摘要:

A detailed mechanism for the four-component RD387 gasoline surrogate developed by Lawrence Livermore National Laboratory has shown good agreement with experiments in engine-relevant conditions. However, with 1388 species and 5933 reversible reactions, this detailed mechanism is far too large to use in practical engine simulations. Therefore, reduction of the detailed mechanism was performed using a multi-stage approach consisting of the DRGEPSA method, unimportant reaction elimination, isomer lumping, and analytic QSS reduction based on CSP analysis. A new greedy sensitivity analysis algorithm was developed and demonstrated to be capable of removing more species for the same error limit compared to the conventional sensitivity analysis used in DRG-based skeletal reduction methods. Using this new greedy algorithm, several skeletal and reduced mechanisms were developed at varying levels of complexity and for different target condition ranges. The final skeletal and reduced mechanisms consisted of 213 and 148 species, respectively, for a lean-to-stoichiometric, low-temperature HCCI-like range of conditions. For a lean-to-rich, high-temperature, SI/CI-like range of conditions, skeletal and reduced mechanisms were developed with 97 and 79 species, respectively. The skeletal and reduced mechanisms in this study were produced using an error limit of 10% and validated using homogeneous autoignition simulations over engine-relevant conditions - all showed good agreement in predicting ignition delay. Furthermore, extended validation was performed, including comparison of autoignition temperature profiles, PSR temperature response curves and extinction turning points, and laminar flame speed calculations. All the extended validation showed results within the 10% error limit, demonstrating the adequacy of the resulting reduced chemistry.

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑