The physics of adhesion of one-dimensional nano structures such as nanotubes, nano wires, and biopolymers on different material substrates is of great interest for the study of biological adhesion and the development of nano electronics and nano mechanics. In this paper, we present force spectroscopy experiments of a single wall carbon nanotube loop using our home-made interferometric atomic force microscope. Characteristic force plateaux during the peeling process allows us to access to quantitative values of the adhesion energy per unit length on various substrates: graphite, mica, platinum, gold and silicon. By combining a time-frequency analysis of the deflexion of the cantilever, we access to the dynamic stiffness of the contact, providing more information on the nanotube configurations and its intrinsic mechanical properties.
The frictional properties of individual multiwalled boron nitride nanotubes (BN-NTs) synthesized by chemical vapor deposition (CVD) and deposited on a silicon substrate are investigated using an atomic force microscope tip sliding along (longitudinal sliding) and across (transverse sliding) the tube's principal axis. Because of the tube transverse deformations during the tip sliding, a larger friction coefficient is found for the transverse sliding as compared to the longitudinal sliding. Here, we show that the friction anisotropy in BN-NTs, defined as the ratio between transverse and longitud…
Hydrogenated amorphous carbon (a-C:H), deposited by the rf-plasma enhanced chemical vapour deposition (rf-PECVD) technique, is a promising material for large area electronic and interlayer dielectric applications. The structural and electronic properties of rf-PECVD a-C:H, deposited at room temperature from CH4/He and CH4/Ar gas mixtures, are shown to be sensitive to the substrate on which the thin film is deposited. The choice of substrate (c-Si or C7059 glass), and the existence and geometrical dimensions of any metallic pattern on the substrate surface, can result in significant spatial var…
Understanding the adhesion between graphene and other materials is crucial for achieving more reliable graphene-based applications in electronic devices and nanocomposites. The ultra-thin profile of graphene, however, poses significant challenge to direct measurement of its adhesion property using conventional approaches. We show that there is a strong correlation between the morphology of graphene on a compliant substrate with patterned surface and the graphene-substrate adhesion. We establish an analytic model to quantitatively determine such a strong correlation. Results show that, dependin…
Metalization of carbon fiber reinforced polymers (CFRPs) composites by the surface modification method to enhance their electrical conductivity, thermal conductivity, electromagnetic shielding, erosion, and radiation protection, has a significant meaning in the aerospace field. In this study, Sn coating was successfully fabricated on the CFRP composite substrate via low-pressure cold spray under four gas temperatures (473K, 523K, 573K, and 623K). Their bonding mechanism was explored via the surface observation after peel-off adhesion strength, accompanying with surface temperature distribution…
Substrate and nanotube polarization are shown to change qualitatively a nanotube bandstructure. The effect is studied in a linear approximation in an external potential which causes the changes. A work function difference between the nanotube and gold surface is estimated to be large enough to break the band symmetry and lift a degeneracy of a lowest but one subband of a metallic nanotube. This subband splitting for [10,10] nanotube is about 50 meV in absence of other external potential.
The structural, electronic, and adhesive properties of Cu/SiO$_2$ interfaces are investigated using first-principles density-functional theory within the local density approximation. Interfaces between fcc Cu and $α$-cristobalite(001) surfaces with different surface stoichiometries are considered. Interfacial properties are found to be sensitive to the choice of the termination, and the oxygen density at the substrate surface is the most important factor influencing the strength of adhesion. For oxygen-rich interfaces, the O atoms at the interface substantially rearrange after the deposition o…
Experimental results for adhesive contacts on substrates coated with elastomeric thin films have recently been obtained by C. Tardivat and L. Léger (J. Adhesion Sci. Technol. 15 1055-1078 (2001)) by the so-called JKR test, which provides both adhesion energy and elastic modulus. These data show that on substrates coated with thin films the adhesion and effective elastic modulus of the sphere depend upon the film thickness. In keeping with the experimental conditions, we try to interpret these data using a simple model (E. Barthel and A. Perriot, J. Phys. D 40, 1059-1067 (2007)) in the thin fil…
The effects of oxidative treatment of single-walled carbon nanotubes (SWCNTs) on the adhesion and proliferation of human osteoblasts (SAOS-2) were investigated. The surface properties of SWCNTs after oxygen plasma treatment were characterised by contact angle measurement, scanning electron microscopy and Raman spectroscopy. The immunofluorescent staining of vinculin, actin filaments and nuclei was used to probe cell adhesion and growth on SWCNT films. Our results show that adhesion and proliferation of human osteoblasts cultivated on SWCNT films indeed depends on the degree of an oxidative tre…
A printing process for high-resolution transfer of all components for organic electronic devices on plastic substrates has been developed and demonstrated for pentacene (Pn), poly (3-hexylthiophene) and carbon nanotube (CNT) thin-film transistors (TFTs). The nanotransfer printing process allows fabrication of an entire device without exposing any component to incompatible processes and with reduced need for special chemical preparation of transfer or device substrates. Devices on plastic substrates include a Pn TFT with a saturation, field-effect mobility of 0.09 cm^2 (Vs)^-1 and on/off ratio …
We report on the synthesis of carbon nanotubes on quasicrystalline alloys. Aligned multiwalled carbon nanotubes (MWNTs) on the conducting faces of decagonal quasicrystals were synthesized using floating catalyst chemical vapor deposition. The alignment of the nanotubes was found perpendicular to the decagonal faces of the quasicrystals. A comparison between the growth and tube quality has also been made between tubes grown on various quasicrystalline and SiO2 substrates. While a significant MWNT growth was observed on decagonal quasicrystalline substrate, there was no significant growth observ…
The aim of this study is to probe the influence of water vapor environment on the microtribological properties of a forestlike vertically aligned carbon nanotube (VACNT) film, deposited on a silicon (001) substrate by chemical vapor deposition. Tribological experiments were performed using a gold tip under relative humidity varying from 0 to 100%. Very low adhesion forces and high friction coefficients of 0.6 to 1.3 resulted. The adhesion and friction forces were independent of humidity, due probably to the high hydrophobicity of VACNT. These tribological characteristics were compared to those…
We study the physics of adhesion and the contact mechanics at the nanoscale with a peeling experiment of a carbon nanotube on a flat substrate. Using an interferometric atomic force microscope and an extended force modulation protocol, we investigate the frequency response of the stiffness of the nano-contact from DC to 20 kHz. We show that this dynamic stiffness is only weakly frequency dependent, increasing by a factor 2 when the frequency grows by 3 orders of magnitude. Such behavior may be the signature of amorphous relaxations during the mechanical solicitation at the nano-scale.
In most envisioned applications, full utilization of a graphene-carbon nanotube (CNT) construct requires maintaining the integrity of the graphene layer during the CNT growth step. In this work, we exhibit an approach towards controlled CNT growth atop graphene substrates where the reaction equilibrium between source hydrocarbon decomposition and carbon saturation into and precipitation from the catalyst nanoparticles shifts towards CNT growth rather than graphene consumption. By utilizing C2H4 feedstock, we demonstrate that the low temperature growth permissible with this gas suppresses undes…
Two-dimensional (2D) materials assembled into van der Waals (vdW) heterostructures contain unlimited combinations of mechanical, optical, and electrical properties that can be harnessed for potential device applications. Critically, these structures require control over interfacial adhesion in order for them to be constructed and to have enough integrity to survive industrial fabrication processes upon their integration. Here, we promptly determine the quality of adhesion of various exfoliated 2D materials on conventional SiO$_{2}$/Si substrates using ultrasonic delamination threshold testing.…
How friction affects adhesion is addressed. The problem is considered in the context of a very stiff sphere adhering to a compliant, isotropic, linear elastic substrate, and experiencing adhesion and frictional slip relative to each other. The adhesion is considered to be driven by very large attractive tractions between the sphere and the substrate that can act only at very small distances between them. As a consequence, the adhesion behavior can be represented by the Johnson-Kendall-Roberts model, and this is assumed to prevail also when frictional slip is occurring. Frictional slip is consi…
The frictional properties of individual carbon nanotubes (CNTs) are studied by sliding an atomic force microscopy tip across and along its principle axis. This direction-dependent frictional behavior is found to correlate strongly with the presence of structural defects, surface chemistry, and CNT chirality. This study shows that it is experimentally possible to tune the frictional/adhesion properties of a CNT by controlling the CNT structure and surface chemistry, as well as use friction force to predict its structural and chemical properties.
Microtribological properties of vertically-aligned carbon-nanotube (VACNT) films have been studied. Adhesion forces were obtained by measuring force-displacement curves. Friction experiments were conducted in reciprocating sliding configurations. Effects of tip radius, applied force, scan speed, and relative humidity were investigated. A model of the friction of VACNT film is discussed on the basis of in-situ tribological experiments inside a scanning electron microscope (SEM).
The adhesion between a polymer melt and substrate is studied in the presence of chemically attached chains on the substrate surface. Extensive molecular dynamics simulations have been carried out to study the effect of temperature, tethered chain areal density ($Σ$), tethered chain length ($N_{t}$), chain bending energy ($k_θ$) and tensile pull velocity ($v$) on the adhesive failure mechanisms of pullout and/or scission of the tethered chains. We observe a crossover from pure chain pullout to chain scission as $N_{t}$ is increased. Below the glass transition, the value of $N_{t}$ for which thi…
As mechanical structures enter the nanoscale regime, the influence of van der Waals forces increases. Graphene is attractive for nanomechanical systems because its Young's modulus and strength are both intrinsically high, but the mechanical behavior of graphene is also strongly influenced by the van der Waals force. For example, this force clamps graphene samples to substrates, and also holds together the individual graphene sheets in multilayer samples. Here we use a pressurized blister test to directly measure the adhesion energy of graphene sheets with a silicon oxide substrate. We find an …
We use elastomeric polydimethylsiloxane substrates to strain single-walled carbon nanotubes and modulate their electronic properties, with the aim of developing flexible materials that can sense local strain. We demonstrate micron-scale nanotube devices that can be cycled repeatedly through strains as high as 20% while providing reproducible local strain transduction by via the device resistance. We also compress individual nanotubes, and find they undergo an undulatory distortion with a characteristic spatial period of 100-200 nm. The observed period can be understood by the mechanical proper…
Sensing technologies have been under research and development for their varied applications from microelectronics to space exploration. With the end of Moores law in sight, there is growing demand for shrinking materials and improving sensitivity and range of sensing of sensors. Carbon nanotubes (CNTs) offer an excellent combination of small size (in the order of nanometers in two dimensions and micrometers in the third dimension), varied current conductivity (from insulating to metallic), flexibility, mechanical strength and feasibility of mass production. Here we used CNTs to fabricate press…
We investigate the adsorption of graphene sheets on h-BN substrates by means of first-principles calculations in the framework of adiabatic connection fluctuation-dissipation theory in the random phase approximation. We obtain adhesion energies for different crystallographic stacking configurations and show that the interlayer bonding is due to long-range van der Waals forces. The interplay of elastic and adhesion energies is shown to lead to stacking disorder and moiré structures. Band structure calculations reveal substrate induced mass terms in graphene which change their sign with the stac…
The mechanical integrity of composite materials depends primarily on the interface strength and the defect density of the reinforcement which is the provider of enhanced strength and stiffness. In the case of graphene/ polymer nanocomposites which are characterized by an extremely large interface region, any defects in the inclusion (such as folds, cracks, holes etc.) will have a detrimental effect to the internal strain distribution and the resulting mechanical performance. This conventional wisdom, however, can be challenged if the defect size is reduced beyond the critical size for crack fo…
Based on electron-beam direct writing on the SiOx/Si substrates, favorable absorption sites for ferric cations (Fe3+ ions) were created on the surface oxide layer. This allowed Fe3+-assisted self-assembled arrays of single-wall carbon nanotube (SWNT) probes to be produced. Auger investigation indicated that the incident energetic electrons depleted oxygen, creating more dangling bonds around Si atoms at the surface of the SiOx layer. This resulted in a distinct difference in the friction forces from unexposed regions as measured by lateral force microscopy (LFM). Atomic force microscopy (AFM) …
In order to understand the first stages of the nucleation of carbon nanotubes in catalytic processes, we present a tight-binding Monte Carlo study of the stability and cohesive mechanisms of different carbon structures deposited on nickel (100) surfaces. Depending on the geometry, we obtain contrasted results. On the one hand, the analysis of the local energy distributions of flat carbon sheets, demonstrate that dangling bonds remain unsaturated in spite of the presence of the metallic catalyst. Their adhesion results from the energy gain of the surface Ni atoms located below the carbon nanost…
It is important to understand the electronic interaction between single-walled carbon nanotubes (SWNTs) and graphene in order to use them efficiently in multifunctional hybrid devices. Here we deposited SWNT bundles on graphene-covered copper and SiO2 substrates by chemical vapor deposition and investigated the charge transfer between them by Raman spectroscopy. Our results revealed that, on both copper and SiO2 substrates, graphene donates electrons to the SWNTs, resulting in p-type doped graphene and n-type doped SWNTs.
We present a study on the mechanical configuration and the electronic properties of semiconducting carbon nanotubes supported by partially depassivated silicon substrates, as inferred from topographic and spectroscopic data acquired with a room-temperature ultrahigh vacuum scanning tunneling microscope and density-functional theory calculations. A mechanical distortion and doping for semiconducting carbon nanotubes on Si(100)-(2x1):H with hydrogen-depassivated stripes up to 100 Angstrom wide are ascertained from both experiment and theory. The results presented here point towards novel and loc…
Carbon nanotubes have properties depending on the arrangement of carbon atoms on the tube walls, called chirality. Also it has been tried to grow nanotubes of only one chirality for more than a decade it is still not possible today. A narrowing of the distribution of chiralities, however, which is a first step towards chirality control, has been observed for the growth of nanotubes on catalysts composed of nickel and iron. In this paper, we have calculated carbon-metal bond energies, adhesion energies and charge distributions of carbon nanotube caps on Ni, Fe and NiFe alloy clusters using dens…
In this paper, we study how the distribution of net charges in carbon nanotubes can be influenced by substrate and external electric fields, using theoretical calculations based on an extension of the atomic charge-dipole model. We find that the charge enhancement becomes less significant when the tube gets closer to substrate or when the dielectric constant of substrate increases. It is demonstrated that net charges can be shifted to one side of tube by longitudinal electric fields and the polarity of charges can be locally changed, while transversal fields give much less influence on the cha…
Carbon nanotubes (CNTs) have large intrinsic carrier mobility due to weak acoustic phonon scattering. However, unlike two-dimensional metal-oxide-semiconductor field effect transistors (MOSFETs), substrate surface polar phonon (SPP) scattering has a dramatic effect on the CNTFET mobility, due to the reduced vertical dimensions of the latter. We find that for the Van der Waals distance between CNT and an SiO$_2$ substrate, the low-field mobility at room temperature is reduced by almost an order of magnitude depending on the tube diameter. We predict additional experimental signatures of the SPP…
Vertically aligned carbon nanotube (CNT) forests are a particularly interesting class of nanomaterials, because they combine multifunctional properties, such as high energy absorption, compressive strength, recoverability and super-hydrophobicity with light weight. These characteristics make them suitable for application as coating, protective layers and antifouling substrates for metallic pipelines and blades. Direct growth of CNT forests on metals offers the possibility to transfer the tunable CNT functionalities directly onto the desired substrates. Here, we focus on characterizing the stru…
Understanding material behavior under high velocity impact is the key to addressing a variety of fundamental questions in areas ranging from asteroid strikes and geological cratering to impact-induced phase transformations, spallation, wear, and ballistic penetration. Recently, adhesion has emerged in this spectrum since it has been found that micrometer-sized metallic particles can bond to metallic substrates under supersonic-impact conditions. However, the mechanistic aspects of impact-induced adhesion are still unresolved. Here we study supersonic impact of individual metallic microparticle…
A simple method to disperse individual single walled carbon nanotubes (SWCNT ) on an atomically flat substrate is presented. Proper tuning of ac modes of atomic force microscopes(AFM) is discussed. This is needed to discriminate between individual nanotubes and very small bundles. The distribution of lengths of the nanotubes measured by these methods is reported.
We analyze transport in metallic single-wall carbon nanotubes (SWNTs) on insulating substrates over the bias range up to electrical breakdown in air. To account for Joule self-heating, a temperature-dependent Landauer model for electrical transport is coupled with the heat conduction equation along the nanotube. The electrical breakdown voltage of SWNTs in air is found to scale linearly with their length, approximately as 5 V/um; we use this to deduce a thermal conductance between SWNT and substrate g ~ 0.17 +/- 0.03 W/K/m per tube length, which appears limited by the SWNT-substrate interface …
We demonstrate a substrate-supported thermometry platform to measure thermal conduction in nanomaterials like graphene, with no need to suspend them. We use three-dimensional simulations and careful uncertainty analysis to optimize the platform geometry and to obtain the sample thermal conductivity. The lowest thermal sheet conductance that can be sensed with <50% error is ~25 nW/K at room temperature, indicating applicability of this platform to graphene or polymer thin films, nanotube or nanowire arrays, even a single Si nanowire. The platform can also be extended to plastic substrates, and …
Prevalence of electronic gadgets has been on the rise and among several considerations that are important for furthering frontiers of utility of new gadgets is mechanical flexibility of electronic systems. Flexible electronics require functional materials to be held by flexible substrates that can be bent to small radii of curvature. In addition, the functionality of the active material has to remain intact during the process of bending. There have been challenges in the transfer process of functional materials onto flexible substrates as well as challenges in maintaining the functionality of …
Excess heat generated in integrated circuits is one of the major problems of modern electronics. Surface phonon-polariton scattering is shown here to be the dominant mechanism for hot charge carrier energy dissipation in a nanotube device fabricated on a polar substrate, such as $SiO_2$. Using microscopic quantum models the Joule losses were calculated for the various energy dissipation channels as a function of the electric field, doping, and temperature. The polariton mechanism must be taken into account to obtain an accurate estimate of the effective thermal coupling of the non-suspended na…
The surface tension of compliant materials such as gels provides resistance to deformation in addition to and sometimes surpassing that due to elasticity. This article studies how surface tension changes the contact mechanics of a small hard sphere indenting a soft elastic substrate. Previous studies have examined the special case where the external load is zero, so contact is driven by adhesion alone. Here, we tackle the much more complicated problem where, in addition to adhesion, deformation is driven by an indentation force. We present an exact solution based on small strain theory. The re…
We study the optical properties of a single, semiconducting single-walled carbon nanotube (CNT) that is partially suspended across a trench and partially supported by a SiO2-substrate. By tuning the laser excitation energy across the E33 excitonic resonance of the suspended CNT segment, the scattering intensities of the principal Raman transitions, the radial breathing mode (RBM), the G-mode and the D-mode show strong resonance enhancement of up to three orders of magnitude. In the supported part of the CNT, despite a loss of Raman scattering intensity of up to two orders of magnitude, we reco…
The photoluminescence (PL) quantum yield of single-walled carbon nanotubes (SWNTs) is relatively low, with various quenching effects by metallic species reported in the literature. Here, we report the first case of metal enhanced fluorescence (MEF) of surfactant-coated carbon nanotubes on nanostructured gold substrates. The photoluminescence quantum yield of SWNTs is observed to be enhanced more than 10-fold. The dependence of fluorescence enhancement on metal-nanotube distance and on surface plasmon resonance (SPR) of the gold substrate for various SWNT chiralities is measured to reveal the m…
In the present work we investigate various optical properties (such as light absorption and reflectance) of anodic TiO2 nanotubes layers directly transferred as self-standing membranes onto quartz substrates. This allows investigation in a transmission geometry which provides significantly more reliable data than measurements on the metallic Ti substrate. Light transmission and reflectance measurements were carried out for layers of thicknesses varying from 1.8 to 50 micrometer, and the layers were investigated in their amorphous and crystalline form. A series of wavelength-dependent light att…
The unique topology and exceptional properties of carbon nanoscrolls (CNSs) have inspired unconventional nano-device concepts, yet the fabrication of CNSs remains rather challenging. Using molecular dynamics simulations, we demonstrate the spontaneous formation of a CNS from graphene on a substrate, initiated by a carbon nanotube (CNT). The rolling of graphene into a CNS is modulated by the CNT size, the carbon-carbon interlayer adhesion, and the graphene-substrate interaction. A phase diagram emerging from the simulations can offer quantitative guideline toward a feasible and robust physical …
Breast cancer is the most common type of cancer observed in women. Communication with the tumor microenvironment allows invading breast cancer cells, such as triple negative breast cancer cells, to adapt to specific substrates. The substrate topography modulates the cellular behavior, among other factors. A number of different materials and micro/nanofabrication techniques have been employed to develop substrates for cell culturing. Silicon-based substrates present a lot of advantages as they are amenable to a wide range of processing techniques and they permit rigorous control over the surfac…
Recent air pollution issues have raised significant attention to develop efficient air filters, and one of the most promising candidates is that enabled by nanofibers. We explore here selective molecular capture mechanism for volatile organic compounds in carbon nanotube networks by performing atomistic simulations. The results are discussed with respect to the two key parameters that define the performance of nanofiltration, i.e. the capture efficiency and flow resistance, which validate the advantage of carbon nanotube networks with high surface-to-volume ratio and atomistically smooth surfa…
The nonequilibrium Green's function method is applied to investigate the coefficient of thermal expansion (CTE) in single-walled carbon nanotubes (SWCNT) and graphene. It is found that atoms deviate about 1% from equilibrium positions at T=0 K, resulting from the interplay between quantum zero-point motion and nonlinear interaction. The CTE in SWCNT of different sizes is studied and analyzed in terms of the competition between various vibration modes. As a result of this competition, the axial CTE is positive in the whole temperature range, while the radial CTE is negative at low temperatures.…
Diamond-like carbon (DLC) coatings have excellent mechanical and tribological properties, as well as good wear and corrosion resistance. They are well established in medical, metalworking and automotive applications. However, further improvements are needed and substrate pre-treatment plays an important role in supporting and enforcing the adhesion and service performance of the DLC coatings. In this work, the synergetic effect of low-pressure arc plasma-assisted-nitriding (PAN) treatment of M2 steel and plasma-enhanced chemical vapor deposition (PECVD) on the DLC coatings adhesion was analyze…
Pairs of electrodes with nanometer separation (nano-gap) are achieved through an electromigration-induced break-junction (EIBJ) technique at room temperature. Lithographically defined gold (Au) wires are formed by e-beam evaporation over oxide coated silicon substrates silanized with (3-Mercaptopropyl)trimethoxysilane (MPTMS) and then subjected to electromigration at room temperature to create a nanometer scale gap between the two newly formed Au electrodes. The Si-O-Si covalent bond at the SiO$_2$ surface and the Au-sulphur (Au-S) bond at the top evaporated Au side, makes MPTMS as an efficien…
Carbon Nanotubes (CNTs)-polymer composites are promising candidates for a myriad of applications. Ad-hoc CNTs-polymer composite fabrication techniques inherently pose roadblock to optimized processing resulting in microstructural defects i.e., void formation, poor interfacial adhesion, wettability, and agglomeration of CNTs inside the polymer matrix. Although improvement in the microstructures can be achieved via additional processing steps such as-mechanical methods and/or chemical functionalization, the resulting composites are somewhat limited in structural and functional performances. Here…
We study the mechanics of pressurized graphene membranes using an experimental configuration that allows the determination of the elasticity of graphene and the adhesion energy between a substrate and a graphene (or other two-dimensional solid) membrane. The test consists of a monolayer graphene membrane adhered to a substrate by surface forces. The substrate is patterned with etched microcavities of a prescribed volume and when they are covered with the graphene monolayer it traps a fixed number (N) of gas molecules in the microchamber. By lowering the ambient pressure, and thus changing the …
Hexagonal boron nitride (h-BN) is unique among two-dimensional materials, with a large band gap (~6 eV) and high thermal conductivity (>400 W/m/K), second only to diamond among electrical insulators. Most electronic studies to date have relied on h-BN exfoliated from bulk crystals; however, for scalable applications the material must be synthesized by methods such as chemical vapor deposition (CVD). Here, we demonstrate single- and few-layer h-BN synthesized by CVD on single crystal platinum and on carbon nanotube (CNT) substrates, also comparing these films with h-BN deposited on the more com…
Fabrication techniques such as laser patterning offer excellent potential for low cost and large area device fabrication. Conductive polymers can be used to replace expensive metallic inks such as silver and gold nanoparticles for printing technology. Electrical conductivity of the polymers can be improved by blending with carbon nanotubes. In this work, formulations of acid functionalised multiwall carbon nanotubes (f-MWCNT) and poly (ethylenedioxythiophene) [PEDOT]: polystyrene sulphonate [PSS] were processed, and thin films were prepared on plastic substrates. Conductivity of PEDOT: PSS inc…
Printed electronics rely on the deposition of conductive liquid inks, typically onto polymeric or paper substrates. Among available conductive fillers for use in electronic inks, carbon nanotubes (CNTs) have high conductivity, low density, processability at low temperatures, and intrinsic mechanical flexibility. However, the electrical conductivity of printed CNT structures has been limited by CNT quality and concentration, and by the need for nonconductive modifiers to make the ink stable and extrudable. This study introduces a polymer-free, printable aqueous CNT ink, and presents the relatio…
Different damping mechanisms in graphene nanoresonators are studied: charges in the substrate, ohmic losses in the substrate and the graphene sheet, breaking and healing of surface bonds (Velcro effect), two level systems, attachment losses, and thermoelastic losses. We find that, for realistic structures and contrary to semiconductor resonators, dissipation is dominated by ohmic losses in the graphene layer and metallic gate. An extension of this study to carbon nanotube-based resonators is presented.
