arXivDaily arXiv每日学术速递 周一至周五更新
arXiv周末暂无论文更新,休息一下吧,周末愉快~~
arXiv 1407.5892astro-ph.IM
收藏

毫米/亚毫米望远镜用大面积反射式红外滤光片

Large-area Reflective Infrared Filters for Millimeter/sub-mm Telescopes

Z. Ahmed, J. A. Grayson, K. L. Thompson, C. L. Kuo, G. Brooks, T. Pothoven

摘要:

地面毫米和亚毫米望远镜正试图用更大的低温冷却测辐射热计阵列对天空进行成像,但在减轻伴随大孔径的红外负载方面面临挑战。由机械冷却器支持的吸收性红外滤光器不足以与孔径尺寸成比例。放置在望远镜窗口后面的反射金属网过滤器提供了一个可扩展的解决方案,原则上,但受到光刻的限制,直径在300 mm以下。我们提出了激光蚀刻作为一种替代技术,光刻制造大面积反射过滤器,并显示从实验室测试的结果500 mm直径的过滤器。利用现有的能力,可以使用激光蚀刻制造直径达700 mm的滤波器。

英文摘要:

Ground-based millimeter and sub-millimeter telescopes are attempting to image the sky with ever-larger cryogenically-cooled bolometer arrays, but face challenges in mitigating the infrared loading accompanying large apertures. Absorptive infrared filters supported by mechanical coolers scale insufficiently with aperture size. Reflective metal-mesh filters placed behind the telescope window provide a scalable solution in principle, but have been limited by photolithography constraints to diameters under 300 mm. We present laser etching as an alternate technique to photolithography for fabrication of large-area reflective filters, and show results from lab tests of 500 mm-diameter filters. Filters with up to 700 mm diameter can be fabricated using laser etching with existing capability.

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑