Stereo-SCIDAR:使用改进的SCIDAR仪器进行高灵敏度的光学turbulence轮廓分析
Stereo-SCIDAR: Optical turbulence profiling with high sensitivity using a modified SCIDAR instrument
摘要:
下一代自适应光学(AO)系统将需要层析重建技术来将由大气湍流产生的光学折射率波动沿视线映射到天文目标。这些系统可以利用外部大气廓线仪提供的数据加以加强。这对于极大望远镜尺度的层析成像是重要的。在这里,我们提出了一种新的仪器,利用广义闪烁探测和测距(SCIDAR)技术,使高灵敏度的大气光学湍流和风速剖面以上天文观测站的垂直剖面。我们称之为“Stereo-SCIDAR”的新方法使用了一个立体系统,该系统具有来自双星目标入射到单独探测器上的每个恒星的闪烁图案。分离每个恒星的光瞳图像有几个优点,包括:增加了目标恒星的星等差异容限;消除了由于通常与SCIDAR相关的归一化误差而需要重新校准的需要;交叉噪声的信噪比增加至少两倍,协方差函数,因此,对于等星等目标星的轮廓,对于3星等差的目标星,可提高到16倍;以及更容易的风速剖面的实时重建。理论响应函数计算的仪器,并使用蒙特卡罗模拟的性能进行了研究。该技术是证明使用的数据记录在2.5米北欧光学望远镜和1.0米Kapteyn望远镜,无论是在拉帕尔马。
英文摘要:
The next generation of adaptive optics (AO) systems will require tomographic reconstruction techniques to map the optical refractive index fluctuations, generated by the atmospheric turbulence, along the line of sight to the astronomical target. These systems can be enhanced with data from an external atmospheric profiler. This is important for Extremely Large Telescope scale tomography. Here we propose a new instrument which utilises the generalised SCIntillation Detection And Ranging (SCIDAR) technique to allow high sensitivity vertical profiles of the atmospheric optical turbulence and wind velocity profile above astronomical observatories. The new approach, which we refer to as 'Stereo-SCIDAR', uses a stereoscopic system with the scintillation pattern from each star of a double-star target incident on a separate detector. Separating the pupil images for each star has several advantages including: increased magnitude difference tolerance for the target stars; negating the need for re-calibration due to the normalisation errors usually associated with SCIDAR; an increase of at least a factor of two in the signal-to-noise ratio of the cross-covariance function and hence the profile for equal magnitude target stars and up to a factor of 16 improvement for targets of 3 magnitudes difference; and easier real-time reconstruction of the wind-velocity profile. Theoretical response functions are calculated for the instrument, and the performance is investigated using a Monte-Carlo simulation. The technique is demonstrated using data recorded at the 2.5 m Nordic Optical Telescope and the 1.0 m Jacobus Kapteyn Telescope, both on La Palma.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。