The advent of high-intensity pulsed laser technology enables the generation of extreme states of matter under conditions that are far from thermal equilibrium. This in turn could enable different approaches to generating energy from nuclear fusion. Relaxing the equilibrium requirement could widen the range of isotopes used in fusion fuels permitting cleaner and less hazardous reactions that do not produce high energy neutrons. Here we propose and implement a means to drive fusion reactions between protons and boron-11 nuclei, by colliding a laser-accelerated proton beam with a laser-generated boron plasma. We report proton-boron reaction rates that are orders of magnitude higher than those reported previously. Beyond fusion, our approach demonstrates a new means for exploring low-energy nuclear reactions such as those that occur in astrophysical plasmas and related environments.
A design principle is suggested to overcome obstacles that prevent positive net energy output in nuclear fusion devices based on electrostatically accelerated ions. Since Coulomb scattering cross-section dwarfs that of nuclear fusion, the focus is on re-capturing energy of elastically scattered ions before the energy is lost to heat. Device configuration to achieve efficient energy re-capturing is proposed and a favorable estimate of net energy gain is obtained.
PDE foundation model-accelerated inverse estimation of system parameters in inertial confinement fusion
AOT-IC Group, Los Alamos National Laboratory（AOT-IC组，洛斯阿拉莫斯国家实验室）；CAI Division, Los Alamos National Laboratory（CAI部门，洛斯阿拉莫斯国家实验室）；HPC Division, Los Alamos National Laboratory（HPC部门，洛斯阿拉莫斯国家实验室）
To greatly enhance output of nuclear fusion produced neutrons in a laser-initiated Coulomb explosion of Deuterium clusters, we propose to accelerate the resulting ions by a quasi-$dc$ electrical pulse to the energies where the $D^+ + D$ collision cross-section is the highest. With $D^+$ ions bombarding then a Deuterium-rich solid-state cathode, this allows one to solve a few problems simultaneously by (a) completely removing electron cloud hindering the Coulomb explosion of ionic core, (b) utilizing up to 100% of the cluster ions to collide with the high-density packed nuclei, and (c) reaching…
The acceleration of lithium tube segments with the length one centimeter, diameter sixteen microns wall thickness one nanometer is considered. These segments are electrically charged by proton beams produced by an electron beam source. Then, they are accelerated by the traveling wave field in a spiral waveguide. The segments are next sent to a target where they are compressed by three hundred times in the longitudinal direction and compressing target radially, so the conditions for thermonuclear fusion are realized.
Simulated annealing (SA) is a kind of relaxation method for finding equilibria of Hamiltonian systems. A set of evolution equations is solved with SA, which is derived from the original Hamiltonian system so that the energy of the system changes monotonically while preserving Casimir invariants inherent to noncanonical Hamiltonian systems. The energy extremum reached by SA is an equilibrium. Since SA searches for an energy extremum, it can also be used for stability analysis when initiated from a state where a perturbation is added to an equilibrium. The procedure of the stability analysis is …
First mirrors will be the plasma facing components of optical diagnostic systems in ITER. Mirror surfaces will undergo modification caused by erosion and re-deposition processes [1,2]. As a consequence, the mirror performance may be changed and may deteriorate [3,4]. In the divertor region it may also be obscured by deposition [5-7]. The limited access to in-vessel components of ITER calls for testing the mirror materials in present day devices in order to gather information on the material damage and degradation of the mirror performance, i.e. reflectivity. A dedicated experimental programme,…
We discuss scaling laws of fusion yields generated by laser-plasma interactions. The yields are found to scale as a function of the laser power. The origin of the scaling law in the laser driven fusion yield is derived in terms of hydrodynamic scaling. We point out that the scaling properties can be attributed to the laser power dependence of three terms: the reaction rate, the density of the plasma and the projected range of the plasma particle in the target medium. The resulting scaling relations have a predictive power that enables estimating the fusion yield for a nuclear reaction which ha…
This document is the final report of the Community Planning Process (CPP) that describes a comprehensive plan to deliver fusion energy and to advance plasma science. The CPP was initiated by the executive committee of the American Physical Society Division of Plasma Physics (APS DPP) to help the Fusion Energy Sciences Advisory Committee (FESAC) fulfill a charge from the U.S. Department of Energy (DOE) to develop a strategic plan for the DOE Office of Fusion Energy Sciences (FES). In this charge, dated Nov 30, 2018, DOE Deputy Director for Science Dr. Stephen Binkley requested that FESAC "under…
Thermal fusion plasmas initiated by standing whistler waves are investigated numerically by two- and one-dimensional Particle-in-Cell simulations. When a standing whistler wave collapses due to the wave breaking of ion plasma waves, the energy of the electromagnetic waves transfers directly to the ion kinetic energy. Here we find that the ion heating by the standing whistler wave is operational even in multi-dimensional simulations of multi-ion species targets, such as deuterium-tritium (DT) ices and solid ammonia borane (H$_6$BN). The energy conversion efficiency to ions becomes as high as 15…
The fission-fusion reaction mechanism was proposed in order to generate extremely neutron-rich nuclei close to the waiting point N = 126 of the rapid neutron capture nucleosynthesis process (r-process). The production of such isotopes and the measurement of their nuclear properties would fundamentally help to increase the understanding of the nucleosynthesis of the heaviest elements in the universe. Major prerequisite for the realization of this new reaction scheme is the development of laser-based acceleration of ultra-dense heavy ion bunches in the mass range of A = 200 and above. In this pa…
The results of numerical and theoretical studies of the gain of direct-drive inertial confinement fusion (ICF) target, which includes a kinetic description of energy transfer by laser-accelerated fast electrons, are presented. The range of initial temperature of fast electrons and fraction of laser energy contained in these particles were chosen based on the results of recent experiments at the National Ignition Facility (NIF).The effect of 'wandering' of fast electrons is taken into account. It is due to a remoteness of the region of fast electron generation from the ablation surface of implo…
ELI ALPS, ELI-HU Non-Profit Ltd.（ELI ALPS，ELI-HU非营利有限公司）；HUN-REN Wigner Research Centre for Physics（匈牙利科学院维格纳物理研究中心）；Department of Optics and Quantum Electronics, University of Szeged（塞格德大学光学与量子电子学系）；Cyclotron Institute, Texas A&M University（德克萨斯农工大学回旋加速器研究所）；Laboratori Nazionali del Sud, INFN（意大利国家核物理研究所南部分实验室）；Budapest University of Technology and Economics（布达佩斯技术与经济大学）；Department of Physics and Technology, University of Bergen（卑尔根大学物理与技术系）；National Laser-Initiated Transmutation Laboratory, University of Szeged（塞格德大学国家激光诱导嬗变实验室）；King's College London（伦敦国王学院）；Csernai Consult Bergen（Csernai咨询（卑尔根））；Frankfurt Institute for Advanced Studies（法兰克福高等研究院）
We derive a theoretical model for the Rayleigh-Taylor (RT)-like instability for a thin foil accelerated by an intense laser, taking into account finite wavelength effects in the laser wave field. The latter leads to the diffraction of the electromagnetic wave off the periodic structures arising from the instability of the foil, which significantly modifies the growth rate of the RT-like instability when the perturbations on the foil have wavenumbers comparable to or larger than the laser wavenumber. In particular, the growth rate has a local maximum at a perturbation wavenumber approximately e…
The one-dimensional (1D) problem on bilatiral irradiation by proton beams of the plane layer of condensed DT mixture with length $2H$ and density $ρ_0 \leqslant 100ρ_s$, where $ρ_s$ is the fuel solid-state density at atmospheric pressure and temperature of 4 K, is considered. The proton kinetic energy is 1 MeV, the beam intensity is $10^{19}$ W/cm$^2$ and duration is 50 ps. A mathematical model is based on the one-fluid two-temperature hydrodynamics with a wide-range equation of state of the fuel, electron and ion heat conduction, DT fusion reaction kinetics, self-radiation of plasma and plasm…
Particle-In-Cell (PIC) methods are frequently used for kinetic, high-fidelity simulations of plasmas. Implicit formulations of PIC algorithms feature strong conservation properties, up to numerical round-off errors, and are not subject to time-step limitations which make them an attractive candidate to use in simulations fusion plasmas. Currently they remain prohibitively expensive for high-fidelity simulation of macroscopic plasmas. We investigate how amortized solvers can be incorporated with PIC methods for simulations of plasmas. Incorporated into the amortized solver, a neural network pre…
Fast ignition is an alternative concept of laser fusion in which the task of compressing the fusion pellet to supersolid densities is accomplished by the conventional high energy nanosecond glass lasers and the task of igniting the compressed pellet is given to a high intensity, moderate energy pico second source which can set the pellet ablaze (with DT fusion reactions) by creating an adequate size hot spot in it. In this letter, we present a conceptual method by which energy from carbon dioxide ($ CO_2 $) laser could be coupled to heat up ions produced in situ in the plasma, which in turn pr…
The heating of inertial confinement fusion (ICF) target by fast electrons, which are generated as a result of laser interaction with expanding plasma (corona) of a target, is investigated theoretically. It is shown that due to remoteness of the peripheral region, where electrons are accelerated, a significant portion of these particles, moving in corona and repeatedly crossing it due to reflection in a self-consistent electric field, will not hit into the compressed part of target. Using the modern models of fast electron generation, it is shown that in a typical target designed for spark igni…
Laser-driven ion accelerators have the advantages of compact size, high density, and short bunch duration over conventional accelerators. Nevertheless, it is still challenging to simultaneously enhance the yield and quality of laser-driven ion beams for practical applications. Here we propose a scheme to address this challenge via the use of emerging multi-petawatt lasers and a density-modulated target. The density-modulated target permits its ions to be uniformly accelerated as a dense block by laser radiation pressure. In addition, the beam quality of the accelerated ions is remarkably impro…
Three-dimensional (3D) particle-in-cell (PIC) simulations are used to investigate the interaction of ultrahigh intensity lasers ($> 10^{20}$ W/cm$^{-2}$) with matter at overcritical densities. Intense laser pulses are shown to penetrate up to relativistic critical density levels and to be strongly self-focused during this process. The heat flux of the accelerated electrons is observed to have an annular structure when the laser is tightly focused, showing that a large fraction of fast electrons is accelerated at an angle. These results shed light into the multi-dimensional effects present in l…
Ultrahigh-intensity lasers (10$^{18}$-10$^{22}$W/cm$^{2}$) have opened up new perspectives in many fields of research and application [1-5]. By irradiating a thin foil, an ultrahigh accelerating field (10$^{12}$ V/m) can be formed and multi-MeV ions with unprecedentedly high intensity (10$^{10}$A/cm$^2$) in short time scale ($\sim$ps) are produced [6-14]. Such beams provide new options in radiography [15], high-yield neutron sources [16], high-energy-density-matter generation [17], and ion fast ignition [18,19]. An accurate understanding of the nonlinear behavior of beam transport in matter is…
Contemporary ultraintense, short-pulse laser systems provide extremely compact setups for the production of high-flux neutron beams, such as those required for nondestructive probing of dense matter, research on neutron-induced damage in fusion devices or laboratory astrophysics studies. Here, by coupling particle-in-cell and Monte Carlo numerical simulations, we examine possible strategies to optimise neutron sources from ion-induced nuclear reactions using 1-PW, 20-fs-class laser systems. To improve the ion acceleration, the laser-irradiated targets are chosen to be ultrathin solid foils, ei…
Recently achieved high intensities of short laser pulses open new prospects in their application to hole boring in inhomogeneous overdense plasmas and for ignition in precompressed DT fusion targets. A simple analytical model and numerical simulations demonstrate that pulses with intensities exceeding 1022 W/cm2 may penetrate deeply into the plasma as a result of efficient ponderomotive acceleration of ions in the forward direction. The penetration depth as big as hundreds of microns depends on the laser fluence, which has to exceed a few tens of GJ/cm2. The fast ions, accelerated at the botto…
This paper presents the benchmarking and scaling studies of a GPU accelerated three dimensional compressible magnetohydrodynamic code. The code is developed keeping an eye to explain the large and intermediate scale magnetic field generation is cosmos as well as in nuclear fusion reactors in the light of the theory given by Eugene Newman Parker. The spatial derivatives of the code are pseudo-spectral method based and the time solvers are explicit. GPU acceleration is achieved with minimal code changes through OpenACC parallelization and use of NVIDIA CUDA Fast Fourier Transform library (cuFFT)…
We study ion acceleration mechanisms in laser-plasma interactions using neutron spectroscopy. We consider different types of ion-collision mechanisms in the plasma, which cause the angular anisotropy of the observed neutron spectra. These include the collisions between an ion in the plasma and an ion in the target, and the collisions between two ions in the hot plasma. By analyzing the proton spectra, we suggest that the laser-generated plasma consists of at least two components, one of which collectively accelerated and can also produce anisotropy in the angular distribution of fusion neutron…
This is a review of recent research exploring and extending present-day quantum computing capabilities for fusion energy science applications. We begin with a brief tutorial on both ideal and open quantum dynamics, universal quantum computation, and quantum algorithms. Then, we explore the topic of using quantum computers to simulate both linear and nonlinear dynamics in greater detail. Because quantum computers can only efficiently perform linear operations on the quantum state, it is challenging to perform nonlinear operations that are generically required to describe the nonlinear different…
Deep Learning-Accelerated Dynamic Kinetic Monte Carlo Simulation for Hydrogen Transport in Tungsten
Yamagata University（山形大学）；National Institute for Fusion Science（国立研究開発法人核融合科学研究所）；Nagoya University（名古屋大学）；Toyota Technical Development Corporation（丰田技术开发株式会社）；Keio University（庆应义塾大学）；National Institutes for Quantum Science and Technology（国立研究開発法人量子科学技術研究開発機構）；National Institutes of Technology, Nagaoka College（国立高等専門学校機構長岡工業高等専門学校）
