Network coding-based link failure recovery techniques provide near-hitless recovery and offer high capacity efficiency. Diversity coding is the first technique to incorporate coding in this field and is easy to implement over small arbitrary networks. However, its capacity efficiency is restricted by its systematic coding and high design complexity even though its design complexity is lower than the other coding-based recovery techniques. Alternative techniques mitigate some of these limitations, but they are difficult to implement over arbitrary networks. In this paper, we propose a simple column generation-based design algorithm and a novel advanced diversity coding technique to achieve near-hitless recovery over arbitrary networks. The design framework consists of two parts: a main problem and subproblem. Main problem is realized with Linear Programming (LP) and Integer Linear Programming (ILP), whereas the subproblem can be realized with different methods. The simulation results suggest that both the novel coding structure and the novel design algorithm lead to higher capacity efficiency for near-hitless recovery. The novel design algorithm simplifies the capacity placement problem which enables implementing diversity coding-based techniques on very large arbitrary networks.
Network coding-based link failure recovery techniques provide near-hitless recovery and offer high capacity efficiency. Diversity coding is the first technique to incorporate coding in this field and is easy to implement over small arbitrary networks. However, its capacity efficiency is restricted by its systematic coding and high design complexity even though it has lower complexity than the other coding-based recovery techniques. Alternative techniques mitigate some of these limitations, but they are difficult to implement over arbitrary networks. In this paper, we propose a novel non-system…
In this paper, we proposed a fast recovery strategy for a dual link failure in elastic optical network. The elastic optical network is a promising solution to meet the next generation higher bandwidth demand. The survivability of high speed network is very crucial. As the network size increases the probability of the dual link failure and node failure also increases. Here, we proposed a parallel cross connection backup recovery strategy for dual link failure in the network. Proposed strategy shows lower bandwidth blocking probability (BBP), fast connection recovery, and bandwidth provisioning …
Well-known error detection and correction solutions in wireless communications are slow or incur high transmission overhead. Recently, notable solutions like PRAC and DAPRAC, implementing partial packet recovery with network coding, could address these problems. However, they perform slowly when there are many errors. We propose S-PRAC, a fast scheme for partial packet recovery, particularly designed for very noisy wireless channels. S-PRAC improves on DAPRAC. It divides each packet into segments consisting of a fixed number of small RLNC encoded symbols and then attaches a CRC code to each se…
This paper aims to propose a new solution for failure recovery (dead-ends) in Vehicle to Vehicle (V2V) communications through LTE-assisted Device-to-Device communications (D2D). Based on the enhanced networking capabilities offered by Intelligent Transportation Systems (ITS) architecture, our solution can efficiently assist V2V communications in failure recovery situations. We also derive an analytical model to evaluate generic V2V routing recovery failures. Moreover, the proposed hybrid model is simulated and compared to the generic model under different constrains of worst and best cases of …
Now a days, Internet plays a major role in our day to day activities e.g., for online transactions, online shopping, and other network related applications. Internet suffers from slow convergence of routing protocols after a network failure which becomes a growing problem. Multiple Routing Configurations [MRC] recovers network from single node/link failures, but does not support network from multiple node/link failures. In this paper, we propose Enhanced MRC [EMRC], to support multiple node/link failures during data transmission in IP networks without frequent global re-convergence. By recover…
In wireless sensor-actor networks, sensors probe their surroundings and forward their data to actor nodes. Actors collect sensor data and perform certain tasks in response to various events. Since actors operate on harsh environment, they may easily get damaged or failed. Failed actor nodes may partition the network into disjoint subsets. In order to reestablish connectivity nodes may be relocated to new positions. This paper focus on review of three (LeDir, RIM, DARA) node recovery algorithms, and their performance has been analysed in terms network overhead and path length validation metrics…
Due to the rapid development of IoT technology, automatic guided vehicles (AGVs) interact with an industrial control system (ICS) through the wireless network to support the freight distribution in the automated warehouse. However, the message exchange among AGVs and the ICS would experience large packet loss or long transmission delay, in the presence of wireless network link failure and link congestion. Therefore, the performance of warehouse automation would be degraded. In this paper, we propose the Software Defined Fast Failure Recovery(SD-FFR) mechanism, aiming to improve network reliabi…
A reliable and scalable mechanism to provide protection against a link or node failure has additional requirements in the context of SDN and OpenFlow. Not only it has to minimize the load on the controller, but it must be able to react even when the controller is unreachable. In this paper we present a protection scheme based on precomputed backup paths and inspired by MPLS crankback routing, that guarantees instantaneous recovery times and aims at zero packet-loss after failure detection, regardless of controller reachability, even when OpenFlow's "fast-failover" feature cannot be used. The p…
We propose application-layer coding schemes to recover lost data in delay-sensitive uplink (sensor-to-gateway) communications in the Internet of Things. Built on an approach that combines retransmissions and forward erasure correction, the proposed schemes' salient features include low computational complexity and the ability to exploit sporadic receiver feedback for efficient data recovery. Reduced complexity is achieved by keeping the number of coded transmissions as low as possible and by devising a mechanism to compute the optimal degree of a coded packet in O(1). Our major contributions a…
When dealing with node or link failures in Software Defined Networking (SDN), the network capability to establish an alternative path depends on controller reachability and on the round trip times (RTTs) between controller and involved switches. Moreover, current SDN data plane abstractions for failure detection (e.g. OpenFlow "Fast-failover") do not allow programmers to tweak switches' detection mechanism, thus leaving SDN operators still relying on proprietary management interfaces (when available) to achieve guaranteed detection and recovery delays. We propose SPIDER, an OpenFlow-like pipel…
The past century of telecommunications has shown that failures in networks are prevalent. Although much has been done to prevent failures, network nodes and links are bound to fail eventually. Failure recovery processes are therefore needed. Failure recovery is mainly influenced by (1) detection of the failure, and (2) circumvention of the detected failure. However, especially in SDNs where controllers recompute network state reactively, this leads to high delays. Hence, next to primary rules, backup rules should be installed in the switches to quickly detour traffic once a failure occurs. In …
Bluetooth Low Energy (BLE) is an emerging wireless technology created for short-range control and monitoring applications that is becoming increasingly widespread among the Internet of Things (IoT) services because of its low-cost and low-energy consumption. In this paper, we propose a novel neighbor discovery scheme and failure recovery techniques for multi-path and single-path low-power and reliable BLE networks. By exploiting energy-efficient access control and fast and robust routing ideas with adaptive failure recovery, the proposed methods outperform the well-known flooding approach used…
The enormous increase in the usage of communication networks has made protection against node and link failures essential in the deployment of reliable networks. To prevent loss of data due to node failures, a network protection strategy is proposed that aims to withstand such failures. Particularly, a protection strategy against any single node failure is designed for a given network with a set of $n$ disjoint paths between senders and receivers. Network coding and reduced capacity are deployed in this strategy without adding extra working paths to the readily available connection paths. This…
Retransmission based on packet acknowledgement (ACK/NAK) is a fundamental error control technique employed in IEEE 802.11-2007 unicast network. However the 802.11-2007 standard falls short of proposing a reliable MAC-level recovery protocol for multicast frames. In this paper we propose a latency and bandwidth efficient coding algorithm based on the principles of network coding for retransmitting lost packets in a singlehop wireless multicast network and demonstrate its effectiveness over previously proposed network coding based retransmission algorithms.
In this paper we develop network protection strategies against a single link failure in optical networks. The motivation behind this work is the fact that $%70$ of all available links in an optical network suffers from a single link failure. In the proposed protection strategies, denoted NPS-I and NPS-II, we deploy network coding and reduced capacity on the working paths to provide a backup protection path that will carry encoded data from all sources. In addition, we provide implementation aspects and how to deploy the proposed strategies in case of an optical network with $n$ disjoint workin…
Software-defined networking offers numerous benefits against the legacy networking systems through simplifying the process of network management and reducing the cost of network configuration. Currently, the management of failures in the data plane is limited to two mechanisms: proactive and reactive. Such failure recovery techniques are activated after occurrences of failures. Therefore, packet loss is highly likely to occur as a result of service disruption and unavailability. This issue is not only related to the slow speed of recovery mechanisms, but also the delay caused by the failure de…
In energy constrained wireless sensor networks, it is significant to make full use of the limited energy and maximize the network lifetime even when facing some unexpected situation. In this paper, all sensor nodes are grouped into clusters, and for each cluster, it has a mobile cluster head to manage the whole cluster. We consider an emergent situation that one of the mobile cluster heads is broken down, and hence the whole cluster is consequently out of work. An efficient approach is proposed for recovering the failure cluster by selecting multiple static sensor nodes as the cluster heads to…
With the increasing demands for real-time applications traffic in net- works such as video and voice a high convergence time for the existing routing protocols when failure occurred is required. These applications can be very sensitive to packet loss when link/node goes down. In this paper, we propose two algorithms schemas for the link state protocol to reroute the traffic in two states; first, pre-calculated an alternative and disjoint path with the primary one from the source to the destination by re-routing traffic through it, regardless of the locations of failure and the number of failed…
NTT Network Technology Laboratories, NTT Corporation（日本电信电话公司网络技术实验室）；NTT East Corporation（日本电信电话东部公司）；NTT Communication Science Laboratories, NTT Corporation（日本电信电话公司通信科学实验室）
With the increase in scale and complexity of ICT systems, their operation increasingly requires automatic recovery from failures. Although it has become possible to automatically detect anomalies and analyze root causes of failures with current methods, making decisions on what commands should be executed to recover from failures still depends on manual operation, which is quite time-consuming. Toward automatic recovery, we propose a method of estimating recovery commands by using Seq2Seq, a neural network model. This model learns complex relationships between logs obtained from equipment and …
The increasing reliance upon cloud services entails more flexible networks that are realized by virtualized network equipment and functions. When such advanced network systems face a massive failure by natural disasters or attacks, the recovery of the entire system may be conducted in a progressive way due to limited repair resources. The prioritization of network equipment in the recovery phase influences the interim computation and communication capability of systems, since the systems are operated under partial functionality. Hence, finding the best recovery order is a critical problem, whi…
Protecting against link failures in communication networks is essential to increase robustness, accessibility, and reliability of data transmission. Recently, network coding has been proposed as a solution to provide agile and cost efficient network protection against link failures, which does not require data rerouting, or packet retransmission. To achieve this, separate paths have to be provisioned to carry encoded packets, hence requiring either the addition of extra links, or reserving some of the resources for this purpose. In this paper, we propose network protection codes against a sing…
In this paper, we focus on the problems of traffic engineering, failure recovery, fault prevention, and Service Function Chain (SFC) with reliability and energy consumption constraints in Software Defined Networks (SDN). These types of deployments use Fog computing as an emerging paradigm to manage the distributed small-size traffic flows passing through the SDN-enabled switches (possibly Fog Nodes). The main aim of this integration is to support service delivery in real-time, failure recovery, and fault-awareness in an SFC context. Firstly, we present an architecture for Failure Recovery and …
Fly-PRAC: Packet Recovery for Random Linear Network Coding
Technische Universität Dresden (TUD)（德累斯顿工业大学）；Cluster of Excellence “Centre for Tactile Internet with Human-in-the-Loop” (CeTI) of TUD（德累斯顿工业大学触觉互联网与人机交互卓越集群）；Aalborg University（奥尔堡大学）
We propose a network-coding based scheme to protect multiple bidirectional unicast connections against adversarial errors and failures in a network. The network consists of a set of bidirectional primary path connections that carry the uncoded traffic. The end nodes of the bidirectional connections are connected by a set of shared protection paths that provide the redundancy required for protection. Such protection strategies are employed in the domain of optical networks for recovery from failures. In this work we consider the problem of simultaneous protection against adversarial errors and …
Link and node failures are two common fundamental problems that affect operational networks. Protection of communication networks against such failures is essential for maintaining network reliability and performance. Network protection codes (NPC) are proposed to protect operational networks against link and node failures. Furthermore, encoding and decoding operations of such codes are well developed over binary and finite fields. Finding network topologies, practical scenarios, and limits on graphs applicable for NPC are of interest. In this paper, we establish limits on network protection d…
In current scenario several commercial and social organizations are using computer networks for their business and management purposes. In order to meet the business requirements networks are also grow. The growth of network also promotes the handling capability of large networks because it counter raises the possibilities of various faults in the network. A fault in network degrades its performance by affecting parameters like throughput, delay, latency, reliability etc. In hierarchical network models any possibility of fault may collapse entire network. If a fault occurrence disables a devic…
Cluster hash tables (CHTs) are a key persistent-storage component of many large-scale Internet services due to their high performance and scalability. We show that a correctly-designed CHT can also be as easy to manage as a farm of stateless servers. Specifically, we trade away some consistency to obtain reboot-based recovery that is simple, maintains full data availability, and only has modest impact on performance. This simplifies management in two ways. First, it simplifies failure detection by lowering the cost of acting on false positives, allowing us to use simple but aggressive statisti…
Agile recovery from link failures in autonomic communication networks is essential to increase robustness, accessibility, and reliability of data transmission. However, this must be done with the least amount of protection resources, while using simple management plane functionality. Recently, network coding has been proposed as a solution to provide agile and cost efficient network self-healing against link failures, in a manner that does not require data rerouting, packet retransmission, or failure localization, hence leading to simple control and management planes. To achieve this, separate…
Link and node failures are common two fundamental problems that affect operational networks. Hence, protection of communication networks is essential to increase their reliability, performance, and operations. Much research work has been done to protect against link and node failures, and to provide reliable solutions based on pre-defined provision or dynamic restoration of the domain. In this paper we develop network protection strategies against multiple link failures using network coding and joint capacities. In these strategies, the source nodes apply network coding for their transmitted d…
