A folded resonant Fabry-Perot cavity has the potential to significantly reduce the impact of coating thermal noise on the performance of kilometer scale gravitational wave detectors. When constructed using only spherical mirror surfaces it is possible to utilize the extremely robust $TEM_{00}$ mode optical mode. In this paper we investigate the potential thermal noise improvements that can be achieved for third generation gravitational wave detectors using realistic constraints. Comparing the previously proposed beam configurations such as e.g. higher order Laguerre-Gauss modes, we find that similar or better thermal noise improvement factors can be achieved, while avoiding degeneracy issues associated with those beams.
We present a review of modern optical techniques being used and developed for the field of gravitational wave detection. We describe the current state-of-the-art of gravitational waves detector technologies with regard to optical layouts, suspensions and test masses. We discuss the dominant sources and noise in each of these subsystems and the developments that will help mitigate them for future generations of detectors. We very briefly summarise some of the novel astrophysics that will be possible with these upgraded detectors.
We rigorously analyze the frequency response functions and antenna sensitivity patterns of three types of interferometric detectors to scalar mode of gravitational waves which is predicted to exist in the scalar-tensor theory of gravity. By a straightforward treatment, we show that the antenna sensitivity pattern of the simple Michelson interferometric detector depends strongly on the wave length $λ_{\rm SGW}$ of the scalar mode of gravitational waves if $λ_{\rm SGW}$ is comparable to the arm length of the interferometric detector. For the Delay-Line and Fabry-Perot interferometric detectors w…
As a consequence of the extreme precision of the measurements it performs, an interferometric gravitational wave detector is a macroscopic apparatus for which quantum effects are not negligible. I observe that this property can be exploited to probe some aspects of the interplay between Quantum Mechanics and Gravity.
Data quality assessment plays an essential role in the quest to detect gravitational wave signals in data from the LIGO and Virgo interferometric gravitational wave detectors. Interferometer data contains a high rate of noise transients from the environment, the detector hardware, and the detector control systems. These transients severely limit the statistical significance of gravitational wave candidates of short duration and/or poorly modeled waveforms. This paper describes the data quality studies that have been performed in recent LIGO and Virgo observing runs to mitigate the impact of tr…
The Markov chain Monte Carlo methods offer practical procedures for detecting signals characterized by a large number of parameters and under conditions of low signal-to-noise ratio. We present a Metropolis-Hastings algorithm capable of inferring the spin and orientation parameters of a neutron star from its periodic gravitational wave signature seen by laser interferometric detectors
We present an approach to experimentally evaluate gravity gradient noise, a potentially limiting noise source in advanced interferometric gravitational wave (GW) detectors. In addition, the method can be used to provide sub-percent calibration in phase and amplitude of modern interferometric GW detectors. Knowledge of calibration to such certainties shall enhance the scientific output of the instruments in case of an eventual detection of GWs. The method relies on a rotating symmetrical two-body mass, a Dynamic gravity Field Generator (DFG). The placement of the DFG in the proximity of one of …
It has recently been pointed out by Finn that the long-standing derivation of the response of an interferometric gravitational wave detector contains several errors. Here I point out that a contemporaneous derivation of the gravitational wave response for spacecraft doppler tracking and pulsar timing avoids these pitfalls, and when adapted to describe interferometers, recovers a simplified version of Finn's derivation. This simplified derivation may be useful for pedagogical purposes.
Electromagnetic rigidity which exists in large-scale optical resonators if pumping frequency is detuned from the eigenfrequency of resonator have sophisticated spectral dependence which allows to obtain sensitivity better than the Standard Quantum Limits both for the free test mass and the harmonic oscillator.
In interferometric cryogenic gravitational wave detectors, there are plans to cool mirrors and their suspension systems (payloads) in order to reduce thermal noise, that is, one of the fundamental noise sources. Because of the large payload masses (several hundred kg in total) and their thermal isolation, a cooling time of several months is required. Our calculation shows that a high-emissivity coating (e.g. a diamond-like carbon (DLC) coating) can reduce the cooling time effectively by enhancing radiation heat transfer. Here, we have experimentally verified the effect of the DLC coating on th…
Based on the Szekeres-Pirani gravitational compass we suggest the addition of a fourth, non-coplanar mass/mirror to the presently existing laser based gravitational wave observatories, enabling them to operate omnidirectionally, to filter out ambiguous interpretations and to point out the direction of the gravitational wave source.
We study in this paper some filters for the detection of burst-like signals in the data of interferometric gravitational-wave detectors. We present first two general (non-linear) filters with no {\it a priori} assumption on the waveforms to detect. A third filter, a peak correlator, is also introduced and permits to estimate the gain, when some prior information is known about the waveforms. We use the catalogue of supernova gravitational-wave signals built by Zwerger and Müller in order to have a benchmark of the performance of each filter and to compare to the performance of the optimal filt…
In this paper we address both to the problem of identifying the noise Power Spectral Density of interferometric detectors by parametric techniques and to the problem of the whitening procedure of the sequence of data. We will concentrate the study on a Power Spectral Density like the one of the Italian-French detector VIRGO and we show that with a reasonable finite number of parameters we succeed in modeling a spectrum like the theoretical one of VIRGO, reproducing all its features. We propose also the use of adaptive techniques to identify and to whiten on line the data of interferometric det…
We study the thermal-noise spectrum of multi-loop pendulum suspensions for test masses in interferometric gravitational-wave detectors. The dependence of the thermal noise on suspension parameters and on properties of the wire material is discussed for the situation in which the losses are dominated by the internal friction in the pendulum wires.
This paper deals with the reconstruction of the direction of a gravitational wave source using the detection made by a network of interferometric detectors, mainly the LIGO and Virgo detectors. We suppose that an event has been seen in coincidence using a filter applied on the three detector data streams. Using the arrival time (and its associated error) of the gravitational signal in each detector, the direction of the source in the sky is computed using a chi^2 minimization technique. For reasonably large signals (SNR>4.5 in all detectors), the mean angular error between the real location an…
Radiation pressure (RP) noise, one component of quantum noise, can limit the sensitivity of laser interferometric gravitational wave (GW) detectors at lower frequencies. We conceived a possible RP noise cancellation method, using phase flipped ponderomotive-squeezed light (FPSL) incident on free-mass mirrors in interferometers' arms. This possibility is investigated under the constraint that the method is for space-based GW detectors in a broad frequency band lower than 1 Hz without using a long optical cavity. Considering various patterns in a single path small-scale case to generate the FPSL…
We report an upper bound on the strain amplitude of gravitational wave bursts in a waveband from around 800Hz to 1.25kHz. In an effective coincident observing period of 62 hours, the prototype laser interferometric gravitational wave detectors of the University of Glasgow and Max Planck Institute for Quantum Optics, have set a limit of 4.9E-16, averaging over wave polarizations and incident directions. This is roughly a factor of 2 worse than the theoretical best limit that the detectors could have set, the excess being due to unmodelled non-Gaussian noise. The experiment has demonstrated the …
A fundamental limit to the sensitivity of optical interferometers is imposed by Brownian thermal fluctuations of the mirrors' surfaces. This thermal noise can be reduced by using larger beams which "average out" the random fluctuations of the surfaces. It has been proposed previously that wider, higher-order Laguerre-Gaussian modes can be used to exploit this effect. In this article, we show that susceptibility to spatial imperfections of the mirrors' surfaces limits the effectiveness of this approach in interferometers used for gravitational-wave detection. Possible methods of reducing this s…
As an alternative view to the standard big bang cosmology the quasi-steady state cosmology(QSSC) argues that the universe was not created in a single great explosion; it neither had a beginning nor will it ever come to an end. The creation of new matter in the universe is a regular feature occurring through finite explosive events. Each creation event is called a mini-bang or, a mini creation event(MCE). Gravitational waves are expected to be generated due to any anisotropy present in this process of creation. Mini creation event ejecting matter in two oppositely directed jets is thus a source…
Interferometric gravitational wave detectors use mirrors whose substrates are formed from materials of low intrinsic mechanical dissipation. The two most likely choices for the test masses in future advanced detectors are fused silica or sapphire. These test masses must be coated to form mirrors, highly reflecting at 1064nm. We have measured the excess mechanical losses associated with adding dielectric coatings to substrates of fused silica and calculate the effect of the excess loss on the thermal noise in an advanced interferometer.
We formulate the data analysis problem for the detection of the Newtonian waveform from an inspiraling compact-binary by a network of arbitrarily oriented and arbitrarily distributed laser interferometric gravitational wave detectors. We obtain for the first time the relation between the optimal statistic and the magnitude of the network correlation vector, which is constructed from the matched network-filter. This generalizes the calculation reported in an earlier work (gr-qc/9906064), where the detectors are taken to be coincident.
We study how the behavior of quantum noise, presenting the fundamental limit on the sensitivity of interferometric gravitational-wave detectors, depends on properties of input states of light. We analyze the situation with specially prepared nonclassical input states which reduce the photon-counting noise to the Heisenberg limit. This results in a great reduction of the optimum light power needed to achieve the standard quantum limit, compared to the usual configuration.
Typical sources of gravitational wave bursts are supernovae, for which no accurate models exist. This calls for search methods with high efficiency and robustness to be used in the data analysis of foreseen interferometric detectors. A set of such filters is designed to detect gravitational wave burst signals. We first present filters based on the linear fit of whitened data to short straight lines in a given time window and combine them in a non linear filter named ALF. We study the performances and efficiencies of these filters, with the help of a catalogue of simulated supernova signals. Th…
Detecting gravitational wave bursts (characterised by short durations and poorly modelled waveforms) requires to have coincidences between several interferometric detectors in order to reject non-stationary noise events. As the wave amplitude seen in a detector depends on its location with respect to the source direction and as the signal to noise ratio of these bursts are expected to be low, coincidences between antennas may not be so likely. This paper investigates this question from a statistical point of view by using a simple model of a network of detectors; it also estimates the timing p…
We describe a hierarchical data analysis pipeline for coherently searching for gravitational wave (GW) signals from non-spinning compact binary coalescences (CBCs) in the data of multiple earth-based detectors. It assumes no prior information on the sky position of the source or the time of occurrence of its transient signals and, hence, is termed "blind". The pipeline computes the coherent network search statistic that is optimal in stationary, Gaussian noise, and allows for the computation of a suite of alternative statistics and signal-based discriminators that can improve its performance i…
Suitable shaping (in particular, flattening and broadening) of the laser beam has recently been proposed as an effective device to reduce internal (mirror) thermal noise in advanced gravitational wave interferometric detectors. Based on some recently published analytic approximations (valid in the infinite-test-mass limit) for the Brownian and thermoelastic mirror noises in the presence of arbitrary-shaped beams, this paper addresses certain preliminary issues related to the optimal beam-shaping problem. In particular, with specific reference to the Laser Interferometer Gravitational-wave Obse…
After first reviewing the gravitational wave (GW) spectral classification. we discuss the sensitivities of GW detection in space aimed at low frequency band (100 nHz-100 mHz) and middle frequency band (100 mHz-10 Hz). The science goals are to detect GWs from (i) Supermassive Black Holes; (ii) Extreme-Mass-Ratio Black Hole Inspirals; (iii) Intermediate-Mass Black Holes; (iv) Galactic Compact Binaries; (v) Stellar-Size Black Hole Binaries; and (vi) Relic GW Background. The detector proposals have arm length ranging from 100 km to 1.35x109 km (9 AU) including (a) Solar orbiting detectors and (b) …
The ongoing improvements of the advanced gravitational wave (GW) detectors are setting challenging requirements on instrument calibration. We report tests of a calibration technique, based on the well-known gravitation force, which has been applied for the first time on a large interferometer. The results obtained with Advanced Virgo are in good agreement with the predictions and with the usual calibration method. This technique is expected to lead to accurate absolute calibration at the sub-percent level in the coming years, matching the needs of the blooming GW science.
The Unruh effect predicts a thermal response for an accelerated detector moving through the vacuum. Here we propose an interferometric scheme to observe an analogue of the circular Unruh effect using a localized laser coupled to a Bose-Einstein condensate (BEC). Quantum fluctuations in the condensate are governed by an effective relativistic field theory, and as demonstrated, the coupled laser field acts as an effective Unruh-DeWitt detector thereof. The effective speed of light is lowered by 12 orders of magnitude to the sound velocity in the BEC. For detectors traveling close to the sound sp…
Presented in this paper is a Markov chain Monte Carlo (MCMC) routine for conducting coherent parameter estimation for interferometric gravitational wave observations of an inspiral of binary compact objects using data from multiple detectors. The MCMC technique uses data from several interferometers and infers all nine of the parameters (ignoring spin) associated with the binary system, including the distance to the source, the masses, and the location on the sky. The Metropolis-algorithm utilises advanced MCMC techniques, such as importance resampling and parallel tempering. The data is compa…
The displacement noise in the test mass mirrors of interferometric gravitational wave detectors is proportional to their elastic dissipation at the observation frequencies. In this paper, we analyze one fundamental source of dissipation in thin coatings, thermoelastic damping associated with the dissimilar thermal and elastic properties of the film and the substrate. We obtain expressions for the thermoelastic dissipation factor necessary to interpret resonant loss measurements, and for the spectral density of displacement noise imposed on a Gaussian beam reflected from the face of a coated ma…
The large scale interferometric gravitational wave detectors consist of Fabry-Perot cavities operating at very high powers ranging from tens of kW to MW for next generations. The high powers may result in several nonlinear effects which would affect the performance of the detector. In this paper, we investigate the effects of radiation pressure, which tend to displace the mirrors from their resonant position resulting in the detuning of the cavity. We observe a remarkable effect, namely, that the freely hanging mirrors gain energy continuously and swing with increasing amplitude. It is found t…
The thermal fluctuation of mirror surfaces is the fundamental limitation for interferometric gravitational wave (GW) detectors. Here, we experimentally demonstrate for the first time a reduction in a mirror's thermal fluctuation in a GW detector with sapphire mirrors from the Cryogenic Laser Interferometer Observatory at 17\,K and 18\,K. The detector sensitivity, which was limited by the mirror's thermal fluctuation at room temperature, was improved in the frequency range of 90\,Hz to 240\,Hz by cooling the mirrors. The improved sensitivity reached a maximum of $2.2 \times 10^{-19}\,\textrm{m}…
We present a filter for detecting gravitational wave signals from burst sources. This filter requires only minimal advance knowledge of the expected signal: i.e. the signal's frequency band and time duration. It consists of a threshold on the total power in the data stream in the specified signal band during the specified time. This filter is optimal (in the Neyman-Pearson sense) for signal searches where only this minimal information is available.
A large heat load caused by thermal radiation through a metal shield pipe was observed in a cooling test of a cryostat for a prototype of a cryogenic interferometric gravitational wave detector. The heat load was approximately 1000 times larger than the value calculated by the Stefan-Boltzmann law. We studied this phenomenon by simulation and experiment and found that it was caused by the conduction of thermal radiation in a metal shield pipe.
Recently, observational searches for gravitational wave background (GWB) have developed and given direct and indirect constraints on the energy density of GWB in a broad range of frequencies. These constraints have already rejected some theoretical models of large GWB spectra. However, at 100 MHz, there is no strict upper limit from direct observation, though the indirect limit by He4 abundance due to big-bang nucleosynthesis exists. In this paper, we propose an experiment with laser interferometers searching GWB at 100 MHz. We considered three detector designs and evaluated the GW response fu…
We measured forces applied by an actuator with a YBCO film at near 77 K for the Large-scale Cryogenic Gravitational-wave Telescope (LCGT) project. An actuator consisting of both a YBCO film of 1.6 micrometers thickness and 0.81 square centimeters area and a solenoid coil exerted a force of up to 0.2 mN on a test mass. The presented actuator system can be used to displace the mirror of LCGT for fringe lock of the interferometer.
The operation of an interferometer for gravitational waves detection requires sophisticated feedback controls in many parts of the apparatus. The aim of this lecture is to introduce the types of problems to be faced in this line of research. The attention is focused on the "inertial damping" of the test mass suspension of the VIRGO interferometer (the superattenuator): it is a multidimensional local control aimed to reduce the residual motion of the suspended mirror associated to the normal modes of the suspension. Its performance is very important for the locking of the interferometer.
We discuss experimental schemes to measure the Casimir force and short range forces from hypothetical modified gravity with unprecedented sensitivity using highly sensitive prototype gravitational wave detectors as displacement sensors. The finite temperature effects of the Casimir force would be detectable with a sensitivity of better than 1% for separation exceeding 30 microns. Constraints on short range modifications to gravity can be improved in the distance range of 10-100 microns.
We investigated the noise of interferometric gravitational wave detectors due to heat energy deposited by cosmic-ray particles. We derived a general formula that describes the response of a mirror against a cosmic-ray passage. We found that there are differences in the comic-ray responses (the dependence of temperature and cosmic-ray track position) in cases of interferometric and resonant gravitational wave detectors. The power spectral density of vibrations caused by low-energy secondary muons is 100-times smaller than the goal sensitivity of future second-generation interferometer projects,…
It has long been thought that the sensitivity of laser interferometric gravitational-wave detectors is limited by the free-mass standard quantum limit, unless radical redesigns of the interferometers or modifications of their input/output optics are introduced. Within a fully quantum-mechanical approach we show that in a second-generation interferometer composed of arm cavities and a signal recycling cavity, e.g., the LIGO-II configuration, (i) quantum shot noise and quantum radiation-pressure-fluctuation noise are dynamically correlated, (ii) the noise curve exhibits two resonant dips, (iii) …
The derivation of the response function of an interferometric gravitational wave detector is a paradigmatic calculation in the field of gravitational wave detection. Surprisingly, the standard derivation of the response wave detectors makes several unjustifiable assumptions, both conceptual and quantitative, regarding the coordinate trajectory and coordinate velocity of the null geodesic the light travels along. These errors, which appear to have remained unrecognized for at least 35 years, render the "standard" derivation inadequate and misleading as an archetype calculation. Here we identify…
Gravitational waves are perturbations of the metric of space-time. Six polarizations are possible, although general relativity predicts that only two such polarizations, tensor plus and tensor cross are present for gravitational waves. We give the analytical formulas for the antenna response functions for the six polarizations which are valid for any equal-arm interferometric gravitational-wave detectors without optical cavities in the arms.The response function averaged over the source direction and polarization angle decreases at high frequencies which deteriorates the signal-to-noise ratio …
The response of Michelson interferometers to weak plane gravitational waves is computed at one order of accuracy beyond the eikonal equation. The modulation of the electromagnetic field amplitude and polarisation are taken into account by solving the transport equations of geometrical optics with boundary conditions adapted to laser interferometry. Considering both DC and balanced homodyne readout schemes, explicit formulae for the interferometer output signals are derived. These signals comprise perturbations of the optical path length, frequency and amplitude, and are shown to be insensitive…
A derivation of the optical axis lenght fluctations due by tilts of the mirrors of the Fabry-Perot cavity of long-baseline interferometers for the detection of gravitational waves in presence of the gravitational field of the earth is discussed. By comparing with the typical tilt-induced noises it is shown that this potential signal, which is considered a weak source of noise, is negligible for the first generation of gravitational waves interferometers, but, in principle, this effect could be used for high precision measures of the gravitational acceleration if advanced projects will achieve …
We compute the angular pattern and the overlap reduction functions for the geodesic and non-geodesic response of the common mode of two interferometers interacting with a stochastic, massive scalar background. We also discuss the possible overlap between common and differential modes. We find that the cross-correlated response of two common modes to a non-relativistic background may be higher than the response of two differential modes to the same background.
A Polarization-Decomposed Method for Simulating Inhomogeneous Birefringence in Laser-Interferometric Gravitational-Wave Detectors
Institute of Science Tokyo（东京科学大学）；University of Tokyo（东京大学）；Cardiff University（卡迪夫大学）；University of Adelaide（阿德莱德大学）；The University of Tokyo（东京大学）；National Astronomical Observatory of Japan（日本国立天文台）；Università di Trento（特伦托大学）；Japan Aerospace Exploration Agency（日本宇宙航空研究开发机构）
The thermal noise is expected to be one of the main limiting factors on the sensitivity of interferometric gravitational-wave detectors like LIGO and VIRGO. Thermal fluctuations of internal modes of the interferometer's test masses and of suspension modes will dominate the noise spectrum at the important frequency range between 50 and 200 Hz. It is assumed that losses in the test masses and suspensions will occur mainly due to internal friction in their materials, which is related to anelasticity effects in solids. The present notes comprise some basic results on the theory of anelasticity and…
We extend a coherent network data-analysis strategy developed earlier for detecting Newtonian waveforms to the case of post-Newtonian (PN) waveforms. Since the PN waveform depends on the individual masses of the inspiraling binary, the parameter-space dimension increases by one from that of the Newtonian case. We obtain the number of templates and estimate the computational costs for PN waveforms: For a lower mass limit of a solar mass, for LIGO-I noise, and with 3% maximum mismatch, the online computational speed requirement for single detector is a few Gflops; for a two-detector network it i…
Filters developed in order to detect short bursts of gravitational waves in interferometric detector outputs are compared according to three main points. Conventional Receiver Operating Characteristics (ROC) are first built for all the considered filters and for three typical burst signals. Optimized ROC are shown for a simple pulse signal in order to estimate the best detection efficiency of the filters in the ideal case, while realistic ones obtained with filters working with several ``templates'' show how detection efficiencies can be degraded in a practical implementation. Secondly, estima…
Space-borne interferometric gravitational-wave detectors, sensitive in the low-frequency (mHz) band, will fly in the next decade. In these detectors, the spacecraft-to-spacecraft light-travel times will necessarily be unequal and time-varying, and (because of aberration) will have different values on up- and down-links. In such unequal-armlength interferometers, laser phase noise will be canceled by taking linear combinations of the laser-phase observables measured between pairs of spacecraft, appropriately time-shifted by the light propagation times along the corresponding arms. This procedur…
We present an experimental opportunity for the future to measure possible violations to Newton's 1/r^2 law in the 0.1-10 meter range using Dynamic gravity Field Generators (DFG) and taking advantage of the exceptional sensitivity of modern interferometric techniques. The placement of a DFG in proximity to one of the interferometer's suspended test masses generates a change in the local gravitational field that can be measured at a high signal to noise ratio. The use of multiple DFGs in a null experiment configuration allows to test composition independent non-Newtonian gravity significantly be…
We calculate the response of an ideal Michelson interferometer incorporating both dual recycling and squeezed light to gravitational waves. The photon counting noise has contributions from the light which is sent in through the input ports as well as the vacuum modes at sideband frequencies generated by the gravitational waves. The minimum detectable gravity wave amplitude depends on the frequency of the wave as well as the squeezing and recycling parameters. Both squeezing and the broadband operation of dual recycling reduce the photon counting noise and hence the two techniques can be used t…
Residual motion of the arm cavity mirrors is expected to prove one of the principal impediments to systematic lock acquisition in advanced gravitational-wave interferometers. We present a technique which overcomes this problem by employing auxiliary lasers at twice the fundamental measurement frequency to pre-stabilise the arm cavities' lengths. Applying this approach, we reduce the apparent length noise of a 1.3 m long, independently suspended Fabry-Perot cavity to 30 pm rms and successfully transfer longitudinal control of the system from the auxiliary laser to the measurement laser.
The fundamental features of the detection of non-stationary undulatory perturbations of metrics based on the interference effects are considered. The advantage of the Aharonov-Bohm effect in superconductors for these purposes in comparison with the ordinary optical interference is demonstrated. Some circuitries of the interferometric detectors in order to be used with SQUID are suggested. The possibilities of lowering the noise temperature of the ultraweak signals detectors based on the analogy between the processes of high-sensitive measurements and the reversible calculations are discussed.
