兆瓦级电子束通过毫米波器件时的辐射和本底测量
Measured Radiation and Background Levels During Transmission of Megawatt Electron Beams Through Millimeter Apertures
摘要:
我们报告测量的光子和中子辐射水平,同时通过毫米大小的孔径传输0.43兆瓦的电子束,并在束关闭,但加速梯度RF上,操作。这些测量是在杰斐逊国家加速器实验室(JLab)的自由电子激光(FEL)设施中使用来自能量恢复直线加速器的100 MeV电子束进行的。在4.3mA的最大电流(430kW束功率)下,将束连续引导通过铝中的长度为127mm的直径为6mm、4mm和2mm的孔。这项研究是为了表征需要在这种环境中操作的实验的辐射水平,例如拟议的暗光实验。我们发现,持续传输的430千瓦的连续波(CW)光束通过2毫米口径是可行的,可管理的光束相关的背景。我们还发现,在光束关闭,射频操作,内的铌腔的加速器cryomodules的二次电子倍增器是环境辐射的主要来源时,机器被调谐为130兆电子伏的操作。
英文摘要:
We report measurements of photon and neutron radiation levels observed while transmitting a 0.43 MW electron beam through millimeter-sized apertures and during beam-off, but accelerating gradient RF-on, operation. These measurements were conducted at the Free-Electron Laser (FEL) facility of the Jefferson National Accelerator Laboratory (JLab) using a 100 MeV electron beam from an energy-recovery linear accelerator. The beam was directed successively through 6 mm, 4 mm, and 2 mm diameter apertures of length 127 mm in aluminum at a maximum current of 4.3 mA (430 kW beam power). This study was conducted to characterize radiation levels for experiments that need to operate in this environment, such as the proposed DarkLight Experiment. We find that sustained transmission of a 430 kW continuous-wave (CW) beam through a 2 mm aperture is feasible with manageable beam-related backgrounds. We also find that during beam-off, RF-on operation, multipactoring inside the niobium cavities of the accelerator cryomodules is the primary source of ambient radiation when the machine is tuned for 130 MeV operation.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。