arXivDaily arXiv每日学术速递 周一至周五更新
arXiv周末暂无论文更新,休息一下吧,周末愉快~~
arXiv 1303.4611cond-mat.mtrl-sci
收藏

基于莫尔干涉位移场的多向层合板弹性常数的贝叶斯识别

Bayesian Identification of Elastic Constants in Multi-Directional Laminate from Moiré Interferometry Displacement Fields

Christian Gogu, W. Yin, Raphael T. Haftka, Peter G. Ifju, Jérôme Molimard, Rodolphe Le Riche, Alain Vautrin

摘要:

由于三维效应的影响,多向层合板的经典层合理论分析所需的铺层弹性常数可能不同于单向层合板。此外,单向层压材料可能无法用于测试。在这种情况下,全场位移测量提供了同时识别几种材料特性的可能性。为此,需要创建受所有弹性常数强烈影响的复杂位移场。在这项工作中,我们探讨了潜在的使用层合板与开孔牵引载荷下实现,并确定所有四个层弹性常数(E1,E2,12,G 12)一次。然而,由于实验的复杂性、测量量对某些性质的相对不敏感性以及各种可能的不确定性来源,所识别的性质的准确性可能不如从单独测试中测量的性质。因此,重要的是要量化的不确定性(或信心),这些属性的识别。这里,贝叶斯识别用于此目的,因为它可以很容易地模拟分析和测量中的所有不确定性,并且因为它提供了所识别的材料属性的完整耦合概率分布。此外,它还提供了将基于实质上不同的实验确定的特性相结合的可能性。全场测量采用莫尔干涉法。为了提高计算效率,将贝叶斯方法应用于位移场的适当正交分解(POD)。分析表明,四个正交各向异性弹性常数的确定具有相当不同的置信水平以及显着的相关性。与制造规范的比较表明,在一个常数有很大的差异,这一结论与以前的测量该常数的传统四点弯曲试验。有可能POD方法没有充分利用全场测量提供的大量数据,因此,数据提供给其他人使用(作为文章所附的在线材料)。

英文摘要:

The ply elastic constants needed for classical lamination theory analysis of multi-directional laminates may differ from those obtained from unidirectional laminates because of three dimensional effects. In addition, the unidirectional laminates may not be available for testing. In such cases, full-field displacement measurements offer the potential of identifying several material properties simultaneously. For that, it is desirable to create complex displacement fields that are strongly influenced by all the elastic constants. In this work, we explore the potential of using a laminated plate with an open-hole under traction loading to achieve that and identify all four ply elastic constants (E 1, E 2, 12, G 12) at once. However, the accuracy of the identified properties may not be as good as properties measured from individual tests due to the complexity of the experiment, the relative insensitivity of the measured quantities to some of the properties and the various possible sources of uncertainty. It is thus important to quantify the uncertainty (or confidence) with which these properties are identified. Here, Bayesian identification is used for this purpose, because it can readily model all the uncertainties in the analysis and measurements, and because it provides the full coupled probability distribution of the identified material properties. In addition, it offers the potential to combine properties identified based on substantially different experiments. The full-field measurement is obtained by moiré interferometry. For computational efficiency the Bayesian approach was applied to a proper orthogonal decomposition (POD) of the displacement fields. The analysis showed that the four orthotropic elastic constants are determined with quite different confidence levels as well as with significant correlation. Comparison with manufacturing specifications showed substantial difference in one constant, and this conclusion agreed with earlier measurement of that constant by a traditional four-point bending test. It is possible that the POD approach did not take full advantage of the copious data provided by the full field measurements, and for that reason that data is provided for others to use (as on line material attached to the article).

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑