So far, there is no polynomial-time list decoding algorithm (beyond half the minimum distance) for Gabidulin codes. These codes can be seen as the rank-metric equivalent of Reed--Solomon codes. In this paper, we provide bounds on the list size of rank-metric codes in order to understand whether polynomial-time list decoding is possible or whether it works only with exponential time complexity. Three bounds on the list size are proven. The first one is a lower exponential bound for Gabidulin codes and shows that for these codes no polynomial-time list decoding beyond the Johnson radius exists. Second, an exponential upper bound is derived, which holds for any rank-metric code of length $n$ and minimum rank distance $d$. The third bound proves that there exists a rank-metric code over $\Fqm$ of length $n \leq m$ such that the list size is exponential in the length for any radius greater than half the minimum rank distance. This implies that there cannot exist a polynomial upper bound depending only on $n$ and $d$ similar to the Johnson bound in Hamming metric. All three rank-metric bounds reveal significant differences to bounds for codes in Hamming metric.
An efficient implementation of min-sum SC/list decoding of convolutional polar codes is proposed. The complexity of the proposed implementation of SC decoding is more than two times smaller than the straightforward implementation. Moreover, the proposed list decoding algorithm does not require to copy any LLRs during decoding.
We derive the Wu list-decoding algorithm for Generalised Reed-Solomon (GRS) codes by using Gröbner bases over modules and the Euclidean algorithm (EA) as the initial algorithm instead of the Berlekamp-Massey algorithm (BMA). We present a novel method for constructing the interpolation polynomial fast. We give a new application of the Wu list decoder by decoding irreducible binary Goppa codes up to the binary Johnson radius. Finally, we point out a connection between the governing equations of the Wu algorithm and the Guruswami-Sudan algorithm (GSA), immediately leading to equality in the decod…
We present a list decoding algorithm for quaternary negacyclic codes over the Lee metric. To achieve this result, we use a Sudan-Guruswami type list decoding algorithm for Reed-Solomon codes over certain ring alphabets. Our decoding strategy for negacyclic codes over the ring $\mathbb Z_4$ combines the list decoding algorithm by Wu with the Gröbner basis approach for solving a key equation due to Byrne and Fitzpatrick.
A latest coding scheme named polarization-adjusted convolutional (PAC) codes is shown to approach the dispersion bound for the code (128,64) under list decoding. However, to achieve the near-bound performance, the list size of list decoding needs to be excessively large, which leads to insufferable latency. In this paper, to improve the speed of list decoding, fast list decoders for PAC codes are proposed. We define four types of constituent nodes and provide fast list decoding algorithms for each of them. Simulation results present that fast list decoding with three types of constituent nodes…
List decoding of insertions and deletions in the Levenshtein metric is considered. The Levenshtein distance between two sequences is the minimum number of insertions and deletions needed to turn one of the sequences into the other. In this paper, a Johnson-like upper bound on the maximum list size when list decoding in the Levenshtein metric is derived. This bound depends only on the length and minimum Levenshtein distance of the code, the length of the received word, and the alphabet size. It shows that polynomial-time list decoding beyond half the Levenshtein distance is possible for many pa…
This paper is concerned with list decoding of $2$-interleaved binary alternant codes. The principle of the proposed algorithm is based on a combination of a list decoding algorithm for (interleaved) Reed-Solomon codes and an algorithm for (non-interleaved) alternant codes. A new upper bound on the decoding radius is derived and the list size is shown to scale polynomially in the code parameters. While it remains an open problem whether this upper bound is achievable, the provided simulation results show that a decoding radius exceeding the binary Johnson radius can be achieved with a high prob…
A heuristic construction of polar codes for successive cancellation list (SCL) decoding with a given list size is proposed to balance the trade-off between performance measured in frame error rate (FER) and decoding complexity. Furthermore, a construction based on dynamically frozen bits with constraints among the "low weight bits" (LWB) is presented. Simulation results show that the LWB-polar codes outperform the CRC-polar codes and the eBCH-polar codes under SCL decoding.
An open question about Gabidulin codes is whether polynomial-time list decoding beyond half the minimum distance is possible or not. In this contribution, we give a lower and an upper bound on the list size, i.e., the number of codewords in a ball around the received word. The lower bound shows that if the radius of this ball is greater than the Johnson radius, this list size can be exponential and hence, no polynomial-time list decoding is possible. The upper bound on the list size uses subspace properties.
We extend the notion of list decoding to {\em ratio list decoding} which involves a list decoder whose list size is specified as a function of the number of messages $M_n$ and the block length $n$. We present necessary and sufficient conditions on $M_n$ for the existence of code sequences which enable reliable list decoding with respect to the desired list size $L(M_n,n)$. It is shown that the ratio-capacity, defined as the supremum of achievable normalized logarithms of the ratio $r(M_n,n)=M_n/L(M_n,n)$ is equal to the Shannon channel capacity $C$, for both stochastic and deterministic encodi…
We show that locally repairable codes (LRCs) can be list decoded efficiently beyond the Johnson radius for a large range of parameters by utilizing the local error correction capabilities. The new decoding radius is derived and the asymptotic behavior is analyzed. We give a general list decoding algorithm for LRCs that achieves this radius along with an explicit realization for a class of LRCs based on Reed-Solomon codes (Tamo-Barg LRCs). Further, a probabilistic algorithm for unique decoding of low complexity is given and its success probability analyzed.
We consider a decoder with an erasure option and a variable size list decoder for channels with non-casual side information at the transmitter. First, universally achievable error exponents are offered for decoding with an erasure option using a parameterized decoder in the spirit of Csiszár and Körner's decoder. Then, the proposed decoding rule is generalized by extending the range of its parameters to allow variable size list decoding. This extension gives a unified treatment for erasure/list decoding. Exponential bounds on the probability of list error and the average number of incorrect me…
Compared with classical block codes, efficient list decoding of rank-metric codes seems more difficult. Although the list decodability of random rank-metric codes and limits to list decodability have been completely determined, little work on efficient list decoding rank-metric codes has been done. The only known efficient list decoding of rank-metric codes $\mC$ gives decoding radius up to the Singleton bound $1-R-\Ge$ with positive rate $R$ when $ρ(\mC)$ is extremely small, i.e., $Θ(\Ge^2)$ , where $ρ(\mC)$ denotes the ratio of the number of rows over the number of columns of $\mC$ \cite[STO…
Long polar codes can achieve the capacity of arbitrary binary-input discrete memoryless channels under a low complexity successive cancelation (SC) decoding algorithm. But for polar codes with short and moderate code length, the decoding performance of the SC decoding algorithm is inferior. The cyclic redundancy check (CRC) aided successive cancelation list (SCL) decoding algorithm has better error performance than the SC decoding algorithm for short or moderate polar codes. However, the CRC aided SCL (CA-SCL) decoding algorithm still suffer from long decoding latency. In this paper, a reduced…
The Welch--Berlekamp approach for Reed--Solomon (RS) codes forms a bridge between classical syndrome--based decoding algorithms and interpolation--based list--decoding procedures for list size l=1. It returns the univariate error--locator polynomial and the evaluation polynomial of the RS code as a y-root. In this paper, we show the connection between the Welch--Berlekamp approach for a specific Interleaved Reed--Solomon code scheme and the Guruswami--Sudan principle. It turns out that the decoding of Interleaved RS codes can be formulated as a modified Guruswami--Sudan problem with a specific…
A new class of folded subspace codes for noncoherent network coding is presented. The codes can correct insertions and deletions beyond the unique decoding radius for any code rate $R\in[0,1]$. An efficient interpolation-based decoding algorithm for this code construction is given which allows to correct insertions and deletions up to the normalized radius $s(1-((1/h+h)/(h-s+1))R)$, where $h$ is the folding parameter and $s\leq h$ is a decoding parameter. The algorithm serves as a list decoder or as a probabilistic unique decoder that outputs a unique solution with high probability. An upper b…
The problem of source coding with side information (SCSI) is closely related to channel coding. Therefore, existing literature focuses on using the most successful channel codes namely, LDPC codes, turbo codes, and their variants, to solve this problem assuming classical unique decoding of the underlying channel code. In this paper, in contrast to classical decoding, we have taken the list decoding approach. We show that syndrome source coding using list decoding can achieve the theoretical limit. We argue that, as opposed to channel coding, the correct sequence from the list produced by the l…
The key step of syndrome-based decoding of Reed-Solomon codes up to half the minimum distance is to solve the so-called Key Equation. List decoding algorithms, capable of decoding beyond half the minimum distance, are based on interpolation and factorization of multivariate polynomials. This article provides a link between syndrome-based decoding approaches based on Key Equations and the interpolation-based list decoding algorithms of Guruswami and Sudan for Reed-Solomon codes. The original interpolation conditions of Guruswami and Sudan for Reed-Solomon codes are reformulated in terms of a se…
We propose a low complexity list successive cancellation (LCLSC) decoding algorithm to reduce complexity of traditional list successive cancellation (LSC) decoding of polar codes while trying to maintain the LSC decoding performance at the same time. By defining two thresholds, namely "likelihood ratio (LR) threshold" and "Bhattacharyya parameter threshold", we classify the reliability of each received information bit and the quality of each bit channel. Based on this classification, we implement successive cancellation (SC) decoding instead of LSC decoding when the information bits from "bad"…
Practical random network coding based schemes for multicast include a header in each packet that records the transformation between the sources and the terminal. The header introduces an overhead that can be significant in certain scenarios. In previous work, parity check matrices of error control codes along with error decoding were used to reduce this overhead. In this work we propose novel packet formats that allow us to use erasure decoding and list decoding. Both schemes have a smaller overhead compared to the error decoding based scheme, when the number of sources combined in a packet is…
We consider recursive decoding for Reed-Muller (RM) codes and their subcodes. Two new recursive techniques are described. We analyze asymptotic properties of these algorithms and show that they substantially outperform other decoding algorithms with nonexponential complexity known for RM codes. Decoding performance is further enhanced by using intermediate code lists and permutation procedures. For moderate lengths up to 512, near-optimum decoding with feasible complexity is obtained.
The order statistics based list decoding techniques for linear binary block codes of small to medium block length are investigated. The construction of the list of the test error patterns is considered. The original order statistics decoding is generalized by assuming segmentation of the most reliable independent positions of the received bits. The segmentation is shown to overcome several drawbacks of the original order statistics decoding. The complexity of the order statistics based decoding is further reduced by assuming a partial ordering of the received bits in order to avoid the complex…
A list decoding scheme for universal polar codes is presented. Our scheme applies to the universal polar codes first introduced by Sasoglu and Wang, and generalized to processes with memory by the authors. These codes are based on the concatenation of different polar transforms: a sequence of "slow" transforms and Arikan's original "fast" transform. List decoding of polar codes has been previously presented in the context of the fast transform. However, the slow transform is markedly different and requires new techniques and data structures. We show that list decoding is possible with space co…
This letter proposes successive cancellation list (SCL) decoding of product codes with Reed--Muller (RM) component codes. SCL decoding relies on a product code description based on the $2\times 2$ Hadamard kernel, which enables interpreting the code as an RM subcode. The focus is on a class of product codes considered in wireless communication systems, based on single parity-check and extended Hamming component codes. For short product codes, it is shown that SCL decoding with a moderate list size performs as well as (and, sometimes, outperforms) belief propagation (BP) decoding. Furthermore, …
A transform that enables generator-matrix-based Reed-Solomon (RS) coded data to be recovered under interpolation-based list decoding is presented. The transform matrix needs to be computed only once and the transformation of an element from the output list to the desired RS coded data block incurs $k^{2}$ field multiplications, given a code of dimension $k$.
A list decoding algorithm for matrix-product codes is provided when $C_1,..., C_s$ are nested linear codes and $A$ is a non-singular by columns matrix. We estimate the probability of getting more than one codeword as output when the constituent codes are Reed-Solomon codes. We extend this list decoding algorithm for matrix-product codes with polynomial units, which are quasi-cyclic codes. Furthermore, it allows us to consider unique decoding for matrix-product codes with polynomial units.
A decoding algorithm for $q$-ary low-density parity-check codes over the $q$-ary symmetric channel is introduced. The exchanged messages are lists of symbols from $\Fq$. A density evolution analysis for maximum list sizes $1$ and $2$ is developed. Thresholds for selected regular low-density parity-check code ensembles are computed showing gains with respect to a similar algorithm in the literature. Finite-length simulation results confirm the asymptotic analysis.
List decoding for arbitrarily varying channels (AVCs) under state constraints is investigated. It is shown that rates within $ε$ of the randomized coding capacity of AVCs with input-dependent state can be achieved under maximal error with list decoding using lists of size $O(1/ε)$. Under average error an achievable rate region and converse bound are given for lists of size $L$. These bounds are based on two different notions of symmetrizability and do not coincide in general. An example is given that shows that for list size $L$ the capacity may be positive but strictly smaller than the random…
We present a new fast Chase decoding algorithm for binary BCH codes. The new algorithm reduces the complexity in comparison to a recent fast Chase decoding algorithm for Reed--Solomon (RS) codes by the authors (IEEE Trans. IT, 2022), by requiring only a single Koetter iteration per edge of the decoding tree. In comparison to the fast Chase algorithms presented by Kamiya (IEEE Trans. IT, 2001) and Wu (IEEE Trans. IT, 2012) for binary BCH codes, the polynomials updated throughout the algorithm of the current paper typically have a much lower degree. To achieve the complexity reduction, we build …
In this paper we propose an enhanced soft cancellation (SCAN) decoder for polar codes based on decoding stages permutation. The proposed soft cancellation list (SCANL) decoder runs $L$ independent SCAN decoders, each one relying on a different permuted factor graph. The estimated bits are selected among the $L$ candidates through a dedicated metric provided by the decoders. Furthermore, we introduce an early-termination scheme reducing decoding latency without affecting error correction performance. We investigate the error-correction performance of the proposed scheme under various combinatio…
In this work, we show new and improved error-correcting properties of folded Reed-Solomon codes and multiplicity codes. Both of these families of codes are based on polynomials over finite fields, and both have been the sources of recent advances in coding theory. Folded Reed-Solomon codes were the first explicit constructions of codes known to achieve list-decoding capacity; multivariate multiplicity codes were the first constructions of high-rate locally correctable codes; and univariate multiplicity codes are also known to achieve list-decoding capacity. However, previous analyses of the er…
In a recent paper [1] an improved analysis concerning the analysis of List Decoding was presented. The event that the correct codeword is excluded from the list is central. For the additive white Gaussian noise (AWGN) channel an important quantity is the in [1] called effective Euclidean distance. This was earlier considered in [2] under the name Vector Euclidean Distance, where also a simple mathematical expression for this quantity was easily derived for any list size. In [1], a geometrical analysis gives this when the list size is 1, 2 or 3.
We decode Reed-Solomon codes using soft information provided at the receiver. The Extended Euclidean Algorithm (EEA) is considered as an initial step to obtain an intermediate result. The final decoding result is obtained by interpolating the output of the EEA at the least reliable positions of the received word. We refer to this decoding method as reduced list-decoding, since not all received positions are used in the interpolation as in other list-decoding methods, such as the Guruswami-Sudan and Wu algorithms. Consequently the complexity of the interpolation step is reduced considerably. Th…
We show how Gabidulin codes can be list decoded by using a parametrization approach. For this we consider a certain module in the ring of linearized polynomials and find a minimal basis for this module using the Euclidean algorithm with respect to composition of polynomials. For a given received word, our decoding algorithm computes a list of all codewords that are closest to the received word with respect to the rank metric.
We design the first efficient algorithms and prove new combinatorial bounds for list decoding tensor products of codes and interleaved codes. We show that for {\em every} code, the ratio of its list decoding radius to its minimum distance stays unchanged under the tensor product operation (rather than squaring, as one might expect). This gives the first efficient list decoders and new combinatorial bounds for some natural codes including multivariate polynomials where the degree in each variable is bounded. We show that for {\em every} code, its list decoding radius remains unchanged under $m$…
Linearized Reed-Solomon (LRS) codes are sum-rank metric codes that fulfill the Singleton bound with equality. In the two extreme cases of the sum-rank metric, they coincide with Reed-Solomon codes (Hamming metric) and Gabidulin codes (rank metric). List decoding in these extreme cases is well-studied, and the two code classes behave very differently in terms of list size, but nothing is known for the general case. In this paper, we derive a lower bound on the list size for LRS codes, which is, for a large class of LRS codes, exponential directly above the Johnson radius. Furthermore, we show t…
We show how Gabidulin codes can be list decoded by using an iterative parametrization approach. For a given received word, our decoding algorithm processes its entries one by one, constructing four polynomials at each step. This then yields a parametrization of interpolating solutions for the data so far. From the final result a list of all codewords that are closest to the received word with respect to the rank metric is obtained.
We consider list versions of sparse approximation problems, where unlike the existing results in sparse approximation that consider situations with unique solutions, we are interested in multiple solutions. We introduce these problems and present the first combinatorial results on the output list size. These generalize and enhance some of the existing results on threshold phenomenon and uncertainty principles in sparse approximations. Our definitions and results are inspired by similar results in list decoding. We also present lower bound examples that bolster our results and show they are of …
Lifted Reed-Solomon codes are a natural affine-invariant family of error-correcting codes which generalize Reed-Muller codes. They were known to have efficient local-testing and local-decoding algorithms (comparable to the known algorithms for Reed-Muller codes), but with significantly better rate. We give efficient algorithms for list-decoding and local list-decoding of lifted codes. Our algorithms are based on a new technical lemma, which says that codewords of lifted codes are low degree polynomials when viewed as univariate polynomials over a big field (even though they may be very high de…
Polar coding gives rise to the first explicit family of codes that provably achieve capacity with efficient encoding and decoding for a wide range of channels. However, its performance at short block lengths is far from optimal. Arikan has recently presented a new polar coding scheme, which he called polarization-adjusted convolutional (PAC) codes. Such PAC codes provide dramatic improvement in performance as compared to both standard successive-cancellation decoding as well as CRC-aided list decoding. Arikan's PAC codes are based primarily upon the following ideas: replacing CRC precoding wit…
BMERA or convolutional polar codes are an extension of polar codes with a provably better error exponent than polar codes. A successive cancellation (SC) decoding algorithm for BMERA codes similar to SC polar decoders is introduced. A pseudocode description of the SC decoder that can be extended to SC list (SCL) decoding is provided. Simulation results with and without outer CRC codes under SC and SCL decoding are presented for QAM modulation over the AWGN channel to compare the performance of polar and BMERA codes. BMERA codes outperform polar codes by more than 0.5 dB under SCL decoding with…
Consider a polynomial $F$ in $m$ variables and a finite point ensemble $S=S_1 \times ... \times S_m$. When given the leading monomial of $F$ with respect to a lexicographic ordering we derive improved information on the possible number of zeros of $F$ of multiplicity at least $r$ from $S$. We then use this information to design a list decoding algorithm for a large class of affine variety codes.
Guess & Check (GC) codes are systematic binary codes that can correct multiple deletions, with high probability. GC codes have logarithmic redundancy in the length of the message $k$, and the encoding and decoding algorithms of these codes are deterministic and run in polynomial time for a constant number of deletions $δ$. The unique decoding properties of GC codes were examined in a previous work by the authors. In this paper, we investigate the list decoding performance of these codes. Namely, we study the average size and the maximum size of the list obtained by a GC decoder for a constant …
It is shown how to combine ordered statistics decoding (OSD) with CRC-aided belief propagation list (CBPL) decoding of polar codes. Even when the reprocessing order of the OSD is as low as one, the new decoder is shown to significantly improve on CBPL. For reprocessing orders higher than one, we suggest partial reprocessing, where only error patterns associated with the least reliable part of the belief propagation decoded most reliable independent bits are considered. This type of partial reprocessing offers a trade-off between performance and computational complexity.
Polar codes under successive cancellation decoding proposed by Arıkan provably achieve the symmetric capacity of any given binary-input discrete memoryless channel. The successive cancellation list decoder for polar codes was described by Tal and Vardy as a generalization of the successive cancellation decoder of Arıkan. The performance of the successive cancellation list decoder is encouraging in practice. In this paper, we formalize the successive cancellation list decoder in our notation and prove that polar codes under successive cancellation list decoding achieve the symmetric capacity of…
The decoding performance of polar codes strongly depends on the decoding algorithm used, while also the decoder throughput and its latency mainly depend on the decoding algorithm. In this work, we implement the powerful successive cancellation list (SCL) decoder on a GPU and identify the bottlenecks of this algorithm with respect to parallel computing and its difficulties. The inherent serial decoding property of the SCL algorithm naturally limits the achievable speed-up gains on GPUs when compared to CPU implementations. In order to increase the decoding throughput, we use a hybrid decoding s…
We propose a list-decoding scheme for reconstruction codes in the context of uniform-tandem-duplication noise, which can be viewed as an application of the associative memory model to this setting. We find the uncertainty associated with $m>2$ strings (where a previous paper considered $m=2$) in asymptotic terms, where code-words are taken from an error-correcting code. Thus, we find the trade-off between the design minimum distance, the number of errors, the acceptable list size and the resulting uncertainty, which corresponds to the required number of distinct retrieved outputs for successfu…
A pilot-assisted transmission (PAT) scheme is proposed for short blocklengths, where the pilots are used only to derive an initial channel estimate for the list construction step. The final decision of the message is obtained by applying a non-coherent decoding metric to the codewords composing the list. This allows one to use very few pilots, thus reducing the channel estimation overhead. The method is applied to an ordered statistics decoder for communication over a Rayleigh block-fading channel. Gains of up to $1.2$ dB as compared to traditional PAT schemes are demonstrated for short codes …
We demonstrate a decoding scheme for nested lattice codes which is able to decode a list of a particular size which contains the transmitted codeword with high probability. This list decoder is analogous to that used in random coding arguments in achievability schemes of relay channels, and allows for the effective combination of information from the relay and source node. Using this list decoding result, we demonstrate 1) that lattice codes may achieve the capacity of the physically degraded AWGN relay channel, 2) an achievable rate region for the two-way relay channel with direct links using…
A new interpolation-based decoding principle for interleaved Gabidulin codes is presented. The approach consists of two steps: First, a multi-variate linearized polynomial is constructed which interpolates the coefficients of the received word and second, the roots of this polynomial have to be found. Due to the specific structure of the interpolation polynomial, both steps (interpolation and root-finding) can be accomplished by solving a linear system of equations. This decoding principle can be applied as a list decoding algorithm (where the list size is not necessarily bounded polynomially)…
In this work, we introduce a framework to study the effect of random operations on the combinatorial list-decodability of a code. The operations we consider correspond to row and column operations on the matrix obtained from the code by stacking the codewords together as columns. This captures many natural transformations on codes, such as puncturing, folding, and taking subcodes; we show that many such operations can improve the list-decoding properties of a code. There are two main points to this. First, our goal is to advance our (combinatorial) understanding of list-decodability, by unders…
Recursive list decoding is considered for Reed-Muller (RM) codes. The algorithm repeatedly relegates itself to the shorter RM codes by recalculating the posterior probabilities of their symbols. Intermediate decodings are only performed when these recalculations reach the trivial RM codes. In turn, the updated lists of most plausible codewords are used in subsequent decodings. The algorithm is further improved by using permutation techniques on code positions and by eliminating the most error-prone information bits. Simulation results show that for all RM codes of length 256 and many subcodes …
Insdel errors occur in communication systems caused by the loss of positional information of the message. Since the work by Guruswami and Wang, there have been some further investigations on the list decoding of insertion codes, deletion codes and insdel codes. However, unlike classical Hamming metric or even rank-metric, there are still many unsolved problems on list decoding of insdel codes. The contributions of this paper mainly consist of two parts. Firstly, we analyze the list decodability of random insdel codes. We show that list decoding of random insdel codes surpasses the Singleton bo…
Although iterative decoding of polar codes has recently made huge progress based on the idea of permuted factor graphs, it still suffers from a non-negligible performance degradation when compared to state-of-the-art CRC-aided successive cancellation list (CA-SCL) decoding. In this work, we show that iterative decoding of polar codes based on the belief propagation list (BPL) algorithm can approach the error-rate performance of CA-SCL decoding and, thus, can be efficiently used for decoding the standardized 5G polar codes. Rather than only utilizing the cyclic redundancy check (CRC) as a stopp…
