The failure of frictional interfaces and the spatiotemporal structures that accompany it are central to a wide range of geophysical, physical and engineering systems. Recent geophysical and laboratory observations indicated that interfacial failure can be mediated by slow slip rupture phenomena which are distinct from ordinary, earthquake-like, fast rupture. These discoveries have influenced the way we think about frictional motion, yet the nature and properties of slow rupture are not completely understood. We show that slow rupture is an intrinsic and robust property of simple non-monotonic rate-and-state friction laws. It is associated with a new velocity scale $c_{min}$, determined by the friction law, below which steady state rupture cannot propagate. We further show that rupture can occur in a continuum of states, spanning a wide range of velocities from $c_{min}$ to elastic wave-speeds, and predict different properties for slow rupture and ordinary fast rupture. Our results are qualitatively consistent with recent high-resolution laboratory experiments and may provide a theoretical framework for understanding slow rupture phenomena along frictional interfaces.
The failure of frictional interfaces -- the process of frictional rupture -- is widely assumed to feature crack-like properties, with far-reaching implications for various disciplines, ranging from engineering tribology to earthquake physics. An important condition for the emergence of a crack-like behavior is the existence of stress drops in frictional rupture, whose basic physical origin has been recently elucidated. Here we show that for generic and realistic frictional constitutive relations, and once the necessary conditions for the emergence of an effective crack-like behavior are met, f…
The process of frictional rupture, i.e. the failure of frictional systems, abounds in the technological and natural world around us, ranging from squealing car brake pads to earthquakes along geological faults. A general framework for understanding and interpreting frictional rupture commonly involves an analogy to ordinary crack propagation, with far-reaching implications for various disciplines, from engineering tribology to geophysics. An important feature of the analogy to cracks is the existence of a reduction in the stress-bearing capacity of the ruptured interface, i.e. of a drop from t…
A widespread framework for understanding frictional rupture, such as earthquakes along geological faults, invokes an analogy to ordinary cracks. A distinct feature of ordinary cracks is that their near edge fields are characterized by a square root singularity, which is intimately related to the existence of strict dissipation-related lengthscale separation and edge-localized energy balance. Yet, the interrelations between the singularity order, lengthscale separation and edge-localized energy balance in frictional rupture are not fully understood, even in physical situations in which the conv…
The onset of frictional motion at the interface between two distinct bodies in contact is characterized by the propagation of dynamic rupture fronts. We combine friction experiments and numerical simulations to study the properties of these frictional rupture fronts. We extend previous analysis of slow and sub-Rayleigh rupture fronts and show that strain fields and the evolution of real contact area in the tip vicinity of supershear ruptures are well described by analytical fracture-mechanics solutions. Fracture-mechanics theory further allows us to determine long sought-after interface proper…
The rupture of dry frictional interfaces occurs through the propagation of fronts breaking the contacts at the interface. Recent experiments have shown that the velocities of these rupture fronts range from quasi-static velocities proportional to the external loading rate to velocities larger than the shear wave speed. The way system parameters influence front speed is still poorly understood. Here we study steady-state rupture propagation in a one-dimensional (1D) spring-block model of an extended frictional interface, for various friction laws. With the classical Amontons--Coulomb friction l…
The strength and stability of frictional interfaces, ranging from tribological systems to earthquake faults, are intimately related to the underlying spatially-extended dynamics. Here we provide a comprehensive theoretical account, both analytic and numeric, of spatiotemporal interfacial dynamics in a realistic rate-and-state friction model, featuring both velocity-weakening and strengthening behaviors. Slowly extending, loading-rate dependent, creep patches undergo a linear instability at a critical nucleation size, which is nearly independent of interfacial history, initial stress conditions…
The rupture of the interface joining two materials under frictional contact controls their macroscopic sliding. Interface rupture dynamics depend markedly on the mechanical properties of the bulk materials that bound the frictional interface. When the materials are similar, recent experimental and theoretical work has shown that shear cracks described by Linear Elastic Fracture Mechanics (LEFM) quantitatively describe the rupture of frictional interfaces. When the elastic properties of the two materials are dissimilar, many new effects take place that result from bimaterial coupling: the norma…
We study the onset of friction for rough contacting blocks whose interface is coated with a thin lubrication layer. High speed measurements of the real contact area and stress fields near the interface reveal that propagating shear cracks mediate lubricated frictional motion. While lubricants reduce interface resistances, surprisingly, they significantly increase energy dissipated, $Γ$, during rupture. Moreover, lubricant viscosity affects the onset of friction but has no effect on $Γ$. Fracture mechanics provide a new way to view the otherwise hidden complex dynamics of the lubrication layer.
The transition from stick to slip at a dry frictional interface occurs through the breaking of the junctions between the two contacting surfaces. Typically, interactions between the junctions through the bulk lead to rupture fronts propagating from weak and/or highly stressed regions, whose junctions break first. Experiments find rupture fronts ranging from quasi-static fronts with speeds proportional to external loading rates, via fronts much slower than the Rayleigh wave speed, and fronts that propagate near the Rayleigh wave speed, to fronts that travel faster than the shear wave speed. The…
Sliding along frictional interfaces separating dissimilar elastic materials is qualitatively different from sliding along interfaces separating identical materials due to the existence of an elastodynamic coupling between interfacial slip and normal stress perturbations in the former case. This bimaterial coupling has important implications for the dynamics of frictional interfaces, including their stability and rupture propagation along them. We show that while this bimaterial coupling is a monotonically increasing function of the bimaterial contrast, when it is coupled to interfacial shear s…
Frictional interfaces are abundant in natural and manmade systems and their dynamics still pose challenges of fundamental and technological importance. A recent extensive compilation of multiple-source experimental data has revealed that velocity-strengthening friction, where the steady-state frictional resistance increases with sliding velocity over some range, is a generic feature of such interfaces. Moreover, velocity-strengthening friction has very recently been linked to slow laboratory earthquakes and stick-slip motion. Here we elucidate the importance of velocity-strengthening friction …
The dynamics of frictional interfaces play an important role in many physical systems spanning a broad range of scales. It is well-known that frictional interfaces separating two dissimilar materials couple interfacial slip and normal stress variations, a coupling that has major implications on their stability, failure mechanism and rupture directionality. In contrast, interfaces separating identical materials are traditionally assumed not to feature such a coupling due to symmetry considerations. We show, combining theory and experiments, that interfaces which separate bodies made of macrosco…
Frictional interfaces are abundant in natural and engineering systems, and predicting their behavior still poses challenges of prime scientific and technological importance. At the heart of these challenges lies the inherent coupling between the interfacial constitutive relation -- the macroscopic friction law -- and the bulk elasticity of the bodies that form the frictional interface. In this feature paper, we discuss the generic properties of the macroscopic friction law and the many ways in which its coupling to bulk elasticity gives rise to rich spatiotemporal frictional dynamics. We first…
The properties of slow crack growth in brittle materials are analyzed both theoretically and experimentally. We propose a model based on a thermally activated rupture process. Considering a 2D spring network submitted to an external load and to thermal noise, we show that a preexisting crack in the network may slowly grow because of stress fluctuations. An analytical solution is found for the evolution of the crack length as a function of time, the time to rupture and the statistics of the crack jumps. These theoretical predictions are verified by studying experimentally the subcritical growth…
We report some new applications of functional complex networks on acoustic emission waveforms from frictional interfaces. Our results show that laboratory faults undergo a sequence of generic phases as well as strengthening, weakening or fast-slip and slow-slip leading to healing. Also, using functional networks, we extend the dissipated energy due to acoustic emission signals in terms of short-term and long-term features of events. We show that the transition from regular to slow ruptures can have an additional production from the critical rupture class similar to the direct observations of t…
We perform real-time measurements of the net contact area between two blocks of like material at the onset of frictional slip. We show that the process of interface detachment, which immediately precedes the inception of frictional sliding, is governed by three different types of detachment fronts. These crack-like detachment fronts differ by both their propagation velocities and by the amount of net contact surface reduction caused by their passage. The most rapid fronts propagate at intersonic velocities but generate a negligible reduction in contact area across the interface. Sub-Rayleigh f…
We study experimentally the slow growth of a single crack in a fibrous material and observe stepwise growth dynamics. We model the material as a lattice where the crack is pinned by elastic traps and grows due to thermally activated stress fluctuations. In agreement with experimental data we find that the distribution of step sizes follows sub-critical point statistics with a power law (exponent 3/2) and a stress-dependent exponential cut-off diverging at the critical rupture threshold.
The spontaneous nucleation of accelerating slip along slowly driven frictional interfaces is central to a broad range of geophysical, physical and engineering systems, with particularly far-reaching implications for earthquake physics. A common approach to this problem associates nucleation with an instability of an expanding creep patch upon surpassing a critical length $L_c$. The critical nucleation length $L_c$ is conventionally obtained from a spring-block linear stability analysis extended to interfaces separating elastically-deformable bodies using model-dependent fracture mechanics esti…
