arXivDaily arXiv每日学术速递 周一至周五更新
arXiv 1110.3205physics.acc-ph
收藏

ITER Nb3Sn CICC的耦合损耗、横向电磁载荷和轴向热收缩优化

Optimisation of ITER Nb3Sn CICCs for coupling loss, transverse electromagnetic load and axial thermal contraction

A. Nijhuis, E. P. A. van Lanen, G. Rolando

摘要:

ITER电缆导管导体(CICC)由子电缆束组成,缠绕在不同的阶段,这些子电缆束被扭曲以抵消随时间变化的外部磁场引起的耦合损耗。在应变敏感超导体(即Nb3Sn)的情况下,扭曲节距长度的选择对于电缆的性能具有重要意义,因为电磁和热收缩负载很大,而且对于来自AC耦合损耗的热负载也很大。通过在子级中按特定顺序应用较长的捻距,可以减少横向载荷和预热冷却降级,从而提供较大的电缆横向刚度、足够的轴向柔性和最大允许的横向股线支撑。短样品(TF导体)数据的分析表明,增加扭转节距可导致有效轴向压缩应变增加0.3%以上,而实际上不会因弯曲而退化。为了减少耦合损耗,需要具体选择布线绞合顺序,目的是最小化连接的股线和束的面积,所述股线和束被耦合并形成具有所施加的变化的磁场的回路,而不是简单地避免较长的节距。此外,我们建议将CS导线的缠绕覆盖率从50%增加到至少70%。该模型预测显着改善对应变灵敏度和大幅度降低的交流耦合损耗在Nb3Sn CICCs,但也为NbTi CICCs的耦合损耗最小化,可以实现。虽然已经证明了长节距对横向负载降级的成功,但是具有低耦合损耗的组合的预测需要通过短样本测试来验证。

英文摘要:

The ITER cable-in-conduit conductors (CICCs) are built up from sub-cable bundles, wound in different stages, which are twisted to counter coupling loss caused by time-changing external magnet fields. The selection of the twist pitch lengths has major implications for the performance of the cable in the case of strain sensitive superconductors, i.e. Nb3Sn, as the electromagnetic and thermal contraction loads are large but also for the heat load from the AC coupling loss. Reduction of the transverse load and warm-up cool-down degradation can be reached by applying longer twist pitches in a particular sequence for the sub-stages, offering a large cable transverse stiffness, adequate axial flexibility and maximum allowed lateral strand support. Analysis of short sample (TF conductor) data reveals that increasing the twist pitch can lead to a gain of the effective axial compressive strain of more than 0.3 % with practically no degradation from bending. For reduction of the coupling loss, specific choices of the cabling twist sequence are needed with the aim to minimize the area of linked strands and bundles that are coupled and form loops with the applied changing magnetic field, instead of simply avoiding longer pitches. In addition we recommend increasing the wrap coverage of the CS conductor from 50 % to at least 70 %. The models predict significant improvement against strain sensitivity and substantial decrease of the AC coupling loss in Nb3Sn CICCs, but also for NbTi CICCs minimization of the coupling loss can be achieved. Although the success of long pitches to transverse load degradation was already demonstrated, the prediction of the combination with low coupling loss needs to be validated by a short sample test.

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑