采用密度泛函理论计算了Cd 1-xSrxO(0 \leq x \leq 1)的结构、电子和光学性质.我们的结果表明,这些性质强烈依赖于x。Cd和O之间的键是部分共价的,并且随着Sr的浓度从0增加到100%,键的共价性质降低。结果表明,Cd_(1-x)Sr_xO在整个x范围内都是一种间接带隙化合物,随着Sr浓度的增加,合金的带隙从0.85 eV增加到6.00 eV。计算并讨论了频率依赖的介电函数ε1(ω)、ε2(ω)、折射率n(ω)和吸收系数α(ω)。随着Sr含量的增加,折射率的峰值向高能区移动。这些合金的显著特点是Cd_(0.5)Sr_(0.5)O是一种各向异性材料。非寻常折射率的较大值表明该材料为正双折射晶体。目前对该材料光电性能的全面理论研究预测,它可以有效地用于宽光谱范围内的光电应用; IR,可见光和UV。
英文摘要:
Structural, electronic and optical properties of Cd1-xSrxO (0 \leq x \leq 1) are calculated for the first time using density functional theory. Our results show that these properties are strongly dependent on x. The bond between Cd and O is partially covalent and the covalent nature of the bond decreases as the concentration of Sr increases from 0 to 100%. It is found that Cd1-xSrxO is an indirect bandgap compound for the entire range of x and the bandgap of the alloy increases from 0.85 to 6.00 eV with the increase in Sr concentration. Frequency dependent dielectric functions ε1(ω), ε2(ω), refractive index n(ω) and absorption coefficient α(ω) are also calculated and discussed in details. The peak value of refractive indices shifts to higher energy regions with the increase in Sr. The striking feature of these alloys is that Cd0.5Sr0.5O is an anisotropic material. The larger value of the extraordinary refractive index confirms that the material is positive birefringence crystal. The present comprehensive theoretical study of the optoelectronic properties of the material predicts that it can be effectively used in optoelectronic applications in the wide range of spectrum; IR, visible and UV.
Influence of Interface Geometry on Phase Stability and Bandgap Engineering in Boron Nitride substituted Graphene: A Combined First-principles and Monte Carlo Study
A new type-II lepidocrocite-type TiO2/GaSe heterostructure: Electronic and optical properties, bandgap engineering, interaction with ultrafast laser pulses
Phosphorene oxides: bandgap engineering of phosphorene by oxidation
我们发现,磷烯的氧化可以导致形成一个新的家庭的平面(2D)和管状(1D)的氧化物和亚氧化物,其中大部分是绝缘的。这赋予黑磷可以用作阻挡材料和保护层的天然氧化物。此外,磷烯氧化物的带隙取决于氧浓度,这表明受控氧化可以用作设计带隙的手段。对于氧饱和的组成P $_2$ O $_5$,平面相和管状相都具有约8.5eV的大的带隙能量,并且在近紫外区是透明的。预计这两种形式的磷烯氧化物具有与o $^\prime$ -P $_2$ O $_5$相同的生成焓,所述O是五氧化二磷的先前已知形式中最稳定的。
Water induced bandgap engineering in nanoribbons of hexagonal boron nitride
Shanghai Institute of Microsystem and Information Technology, Chinese Academy of Sciences(中国科学院上海微系统与信息技术研究所);University of Chinese Academy of Sciences(中国科学院大学);Nanjing University of Aeronautics and Astronautics(南京航空航天大学);Shanghai Institute of Technical Physics, Chinese Academy of Sciences(中国科学院上海技术物理研究所);ShanghaiTech University(上海科技大学);Kansas State University(堪萨斯州立大学)
Engineering the electronic bandgaps and band edge positions in carbon-substituted 2D boron nitride: a first-principles investigation
石墨烯的改性以在其电子光谱中打开一个强大的间隙对于其在场效应晶体管和光化学应用中的使用至关重要。受最近在制备石墨烯和氮化硼(BN)的均匀合金中的实验成功的启发,我们在这里考虑通过成分和构型修改来工程化C $_{2x}$ B $_{1-x}$ N $_{1-x}$合金的电子结构和带隙。我们从已经具有大带隙的BN端元开始,然后表明:(a)带隙原则上可以通过C $(x<0.25)$的适度取代降低到约2 eV;以及(b)C $_{2x}$ B $_{1-x}$ N $_{1-x}$的电子结构不仅可以通过组成$x$,而且可以通过BN基质中的C取代基所采用的构型来进一步调节。我们的分析,准确的筛选混合功能计算的基础上,提供了一个清晰的理解之间的相关性的带隙和聚集的C原子的水平:带隙减少最大时的C原子被最大限度地隔离,并增加与聚集的C原子由于形成的结合和反结合带与杂化的占据和空的缺陷状态。我们确定相对于真空的价带和导带边缘的位置,并讨论了2D C $_{2x}$ B $_{1-x}$ N $_{1-x}$合金在光催化应用中的潜在用途的影响。最后,我们评估这些合金的形成使用来自第一性原理的团簇膨胀模型的热力学限制。
Transformer-based prediction of two-dimensional material electronic properties under elastic strain engineering
School of Materials Science and Engineering, Beijing Institute of Technology(北京理工大学材料学院);School of Chemistry and Chemical Engineering, Beijing Institute of Technology(北京理工大学化学与化学工程学院)
Interplay of lattice distortion and bands near the Fermi level in $A$TiO$_3$ ($A$=Ca, Sr, Ba)
采用第一性原理计算,在无应变和实际约束条件下研究了$A$ TiO $_3$($A$ =Ca,Sr,Ba)的结构和电子性质.我们致力于找出三个$A$ TiO $_3$家族成员中温和的晶格畸变和带隙之间的相互作用,迄今为止,这一点仍然受到怀疑。我们发现电子结构对应变(压缩或拉伸)特别敏感,正如大多数材料科学研究所预期的那样。我们的研究结果表明,在温和的应变下,带隙($E_{gap}$),在压缩下增加,在拉伸下减少。在所有这三种材料中,发现带隙和晶格参数($a$)与$2.19<x<3.1$的轻度扭曲有关,如$E_{gap}\propto \frac{1}{a^x}$。所有这些变化都归因于这些晶体中静电和共价的相互作用。这项工作作为带隙工程的标尺,以实现这些钛酸盐的可行的未来应用所需的性能。
Bandgap Engineering for Efficient Perovskite Solar Cells Under Multiple Color Temperature Indoor Lighting
King Abdulaziz City for Science and Technology (KACST)(沙特阿拉伯国王科学技术城);College of Engineering, King Saud University(沙特国王大学工程学院);Institute of Electronic Structure and Laser (IESL), Foundation for Research and Technology – Hellas (FORTH)(希腊研究与技术基金会电子结构与激光研究所);Energy, Industry, and Advanced Technologies Research Center, Taibah University(塔伊巴大学能源、工业与先进技术研究中心);Department of Electrical Engineering, College of Engineering, Taibah University(塔伊巴大学电气工程系);Department of Electrical & Computer Engineering, Hellenic Mediterranean University (HMU)(希腊地中海大学电气与计算机工程系);Physics and Astronomy Department, College of Science, King Saud University(沙特国王大学理学院物理与天文学系);Department of Electronic Engineering, School of Engineering, Hellenic Mediterranean University(希腊地中海大学工程学院电子工程系);Department of Materials Science and Engineering, University of Crete(克里特大学材料科学与工程系);King Abdullah Institute for Nanotechnology, King Saud University(沙特国王大学阿卜杜拉国王纳米技术研究所)
Large Enhancements in Optical and Piezoelectric Properties in Ferroelectric Zn1-xMgxO Thin Films through Engineering Electronic and Ionic Anharmonicities
Floquet engineering of titled and gapped Dirac materials
我们已经建立了一个严格的理论形式主义Floquet工程,或调查,并最终定制最关键的电子性质的四硫化钼(1 T $^\prime$ -MoS $_2$),通过施加外部高频修整场在非共振制度。最近的研究表明,单层掺杂的1 T $^\prime$ -MoS $_2$可以呈现出扭曲的四元结构,其具有可调谐的和带隙的自旋极化和谷极化的倾斜狄拉克能带结构。从电子学的角度来看,1 T $^\prime$ -MoS $_2$是技术上最有前途的纳米材料之一,也是已经著名的过渡金属二硫属元素家族的新代表。所得到的修饰态强烈依赖于所施加的照射的极化,并反映了未照射的材料的初始低能哈密顿量的全部复杂性。我们已经计算和分析了所获得的电子修饰状态的线性和圆形类型的极化的施加场集中在其对称性,各向异性,倾斜和带隙,以及拓扑签名。由于圆偏振的敷料场也被称为诱导到一个新的状态与破缺的时间反演对称性和非零陈数的过渡,这些拓扑非平凡的阶段和它们之间的过渡的组合可以揭示一些真正独特的和早期未知的现象。
Sb2Se3 and SbBiSe3 Surface Capping and Biaxial Strain Co-Engineering for Tuning the Surface Electronic Properties of Bi2Se3 Nanosheet- A Density Functional Theory based Investigation