Finite-Element Method Simulations of High-Q Nanocavities with 1D Photonic Bandgap

Optical design of split-beam photonic crystal nanocavities

We design high quality factor photonic crystal nanobeam cavities formed by two mechanically isolated cantilevers. These "split-beam" cavities have a physical gap at the center, allowing mechanical excitations of one or both of the cavity halves. They are designed by analyzing the optical band structures and mode profiles of waveguides perforated by elliptical holes and rectangular gaps, and are predicted to support optical resonances with quality factors exceeding 1E6 at wavelengths of ~ 1.6 um.

Two regimes of confinement in photonic nanocavities: bulk confinement versus lightning rods

We present a theoretical study of dielectric bowtie cavities and show that they are governed by two essentially different confinement regimes. The first is confinement inside the bulk dielectric and the second is a local lightning-rod regime where the field is locally enhanced at sharp corners and may yield a vanishing mode volume without necessarily enhancing the mode inside the bulk dielectric. We show that while the bulk regime is reminiscent of the confinement in conventional nanocavities, the most commonly used definition of the mode volume gauges in fact the lightning-rod effect when app…

Selective tuning of high-Q silicon photonic crystal nanocavities via laser-assisted local oxidation

We examine the cavity resonance tuning of high-Q silicon photonic crystal heterostructures by localized laser-assisted thermal oxidation using a 532 nm continuous wave laser focused to a 2.5 mm radius spot-size. The total shift is consistent with the parabolic rate law. A tuning range of up to 8.7 nm is achieved with ~ 30 mW laser powers. Over this tuning range, the cavity Q decreases from 3.2\times10^5 to 1.2\times10^5. Numerical simulations model the temperature distributions in the silicon photonic crystal membrane and the cavity resonance shift from oxidation.

Efficient resonance management in ultrahigh-Q one-dimensional photonic crystal nanocavities fabricated on 300 mm SOI CMOS platform

Photonic crystal (PhC) nanocavities have demonstrated unique capabilities in terms of light confinement and manipulation. As such, they are becoming attractive for the design of novel resonance-based photonic integrated circuits (PICs). Here two essential challenges arise however - how to realize ultrahigh-Q PhC cavities using standard fabrication processes compatible with large volume fabrication, and how to efficiently integrate them with other standard building blocks, available in exiting PIC platforms. In this work, we demonstrate ultrahigh-Q 1D PhC nanocavities fabricated on a 300 mm SOI…

Design for ultrahigh-Q position-controlled nanocavities of single semiconductor nanowires in 2D photonic crystals

Using Finite-Difference Time-Domain (FDTD) simulation, we show that ultrahigh- Q nanocavities can be obtained through the manipulation of a single semiconductor nanowire (NW) inside a slot in a line defect of a two-dimensional (2D) photonic crystal. By controlling the design and its lattice parameters of the photonic crystal, we have achieved a quality factor Q larger than 106 and a mode volume Vc smaller than 0.11 μm3 (1.25 of a cubic wavelength in the NW) for a cavity peak in the telecommunication band. This design is useful for realizing a position-controlled cavity in a photonic crystal. H…

Slow thermo-optomechanical pulsations in suspended 1D photonic crystal nanocavities

We investigate the nonlinear optical response of suspended 1D photonic crystal nanocavities fabricated on a silicon nitride chip. Strong thermo-optical nonlinearities are demonstrated for input powers as low as $2\,μ\text{W}$ and a self-sustained pulsing regime is shown to emerge with periodicity of several seconds. As the input power and laser wavelength are varied the temporal patterns change in period, duty cycle and shape. This dynamics is attributed to the multiple timescale competition between thermo-optical and thermo-optomechanical effects and closely resembles the relaxation oscillati…

Localized guided-mode and cavity-mode double resonance in photonic crystal nanocavities

We investigate the use of guided modes bound to defects in photonic crystals for achieving double resonances. Photoluminescence enhancement by more than three orders of magnitude has been observed when the excitation and emission wavelengths are simultaneously in resonance with the localized guided mode and cavity mode, respectively. We find that the localized guided modes are relatively insensitive to the size of the defect for one of the polarizations, allowing for flexible control over the wavelength combinations. This double resonance technique is expected to enable enhancement of photolum…

Weak coupling interactions of colloidal lead sulphide nanocrystals with silicon photonic crystal nanocavities near 1.55 microns at room temperature

We observe the weak coupling of lead sulphide nanocrystals to localized defect modes of 2-dimensional silicon nanocavities. Cavity resonances characterized with ensemble nanocrystals are verified with cold-cavity measurements using integrated waveguides. Polarization dependence of the cavity field modes is observed. The linewidths measured in coupling experiments are broadened in comparison to the cold-cavity characterization, partly due to large homogeneous linewidths of the nanocrystals. The calculated Purcell factor for a single exciton is 75, showing promise toward applications in single p…

Reflectance measurement of two-dimensional photonic crystal nanocavities with embedded quantum dots

The spectra of two-dimensional photonic crystal slab nanocavities with embedded InAs quantum dots are measured by photoluminescence and reflectance. In comparing the spectra taken by these two different methods, consistency with the nanocavities' resonant wavelengths is found. Furthermore, it is shown that the reflectance method can measure both active and passive cavities. Q-factors of nanocavities, whose resonant wavelengths range from 1280 to 1620 nm, are measured by the reflectance method in cross polarization. Experimentally, Q-factors decrease for longer wavelengths and the intensity, re…

Nonlinear optical effects of ultrahigh-Q silicon photonic nanocavities immersed in superfluid helium

Photonic nanocavities are a key component in many applications because of their capability of trapping and storing photons and enhancing interactions of light with various functional materials and structures. The maximal number of photons that can be stored in silicon photonic cavities is limited by the free-carrier and thermo-optic effects at room temperature. To reduce such effects, we performed the first experimental study of optical nonlinearities in ultrahigh-Q silicon disk nanocavities at cryogenic temperatures in a superfluid helium environment. At elevated input power, the cavity trans…

Measurement of the linear thermo-optical coefficient of Ga$_{0.51}$In$_{0.49}$P using photonic crystal nanocavities

Ga$_{0.51}$In$_{0.49}$P is a promising candidate for thermally tunable nanophotonic devices due to its low thermal conductivity. In this work we study its thermo-optical response. We obtain the linear thermo-optical coefficient $dn/dT=2.0\pm0.3\cdot 10^{-4}\,\rm{K}^{-1}$ by investigating the transmission properties of a single mode-gap photonic crystal nanocavity.

Observation of femto-joule optical bistability involving Fano resonances in high-Q/Vm silicon photonic crystal nanocavities

We observe experimentally optical bistability enhanced through Fano interferences in high-Q localized silicon photonic crystal resonances (Q ~ 30,000 and modal volume ~ 0.98 cubic wavelengths). This phenomenon is analyzed through nonlinear coupled-mode formalism, including the interplay of chi(3) effects such as two-photon absorption and related free-carrier dynamics, and optical Kerr as well as thermal effects and linear losses. Our experimental and theoretical results demonstrate for the first time Fano-resonance based bistable states with switching thresholds of 185 micro-Watt and 4.5 fJ in…

High-quality lithium niobate photonic crystal nanocavities

Lithium niobate (LN) exhibits unique material characteristics that have found many important applications. Scaling LN devices down to a nanoscopic scale can dramatically enhance light-matter interaction that would enable nonlinear and quantum photonic functionalities beyond the reach of conventional means. However, developing LN-based nanophotonic devices turns out to be nontrivial. Although significant efforts have been devoted in recent years, LN photonic crystal structures developed to date exhibit fairly low quality. Here we demonstrate LN photonic crystal nanobeam resonators with optical …

基于单晶钇铁石榴石的光子晶体缺陷纳米腔

Photonic Crystal Defect Nanocavities Based on Monocrystalline Yttrium Iron Garnet

本研究开发YIG-绝缘体平台与高精度纳米图案化技术，制备出基于单晶铋掺杂YIG的光子晶体缺陷纳米腔，实现1500 nm波长附近的高Q因子，为光-磁相互作用及小型化非互易光子器件提供了新平台。

Generation method of a photonic NOON state with quantum dots in coupled nanocavities

We propose a method to generate path-entangled $N00N$-state photons from quantum dots (QDs) and coupled nanocavities. In the systems we considered, cavity mode frequencies are tuned close to the biexciton two-photon resonance. Under appropriate conditions, the system can have the target $N00N$ state in the energy eigenstate, as a consequence of destructive quantum interference. The $N00N$ state can be generated by the resonant laser excitation. This method, first introduced for two-photon $N00N$ state ($N=2$), can be extended toward higher $N00N$ state ($N>2$) based on our recipe, which is app…

Improved design and experimental demonstration of ultrahigh-Q C${}_\text{6}$-symmetric H1 hexapole photonic crystal nanocavities

An H1 photonic crystal nanocavity is based on a single point defect and has eigenmodes with a variety of symmetric features. Thus, it is a promising building block for photonic tight-binding lattice systems that can be used in studies on condensed matter, non-Hermitian and topological physics. However, improving its radiative quality ($Q$) factor has been considered challenging. Here, we report the design of a hexapole mode of an H1 nanocavity with a $Q$ factor exceeding $10^8$. We achieved such extremely high-$Q$ conditions by designing only four structural modulation parameters thanks to the…

Optical Stochastic Computing Architectures Using Photonic Crystal Nanocavities

Stochastic computing allows a drastic reduction in hardware complexity using serial processing of bit streams. While the induced high computing latency can be overcome using integrated optics technology, the design of realistic optical stochastic computing architectures calls for energy efficient switching devices. Photonics Crystal (PhC) nanocavities are $μm^2$ scale devices offering 100fJ switching operation under picoseconds-scale switching speed. Fabrication process allows controlling the Quality factor of each nanocavity resonance, leading to opportunities to implement architectures invol…

Mode mapping Q > 500 000 photonic crystal nanocavities using free carrier absorption

We demonstrate a nonlinear photomodulation spectroscopy method to image the mode profile of a high-Q photonic crystal resonator (PhCR). This far-field imaging method is suitable for ultrahigh-Q cavities which we demonstrate on a Q = 619000 PhCR. We scan the PhCR surface with a 405 nm pump beam that modulates the refractive index by local thermal tuning, while probing the response of the resonance. We enhance resolution by probing at high power, using the thermo-optical nonlinearity of the PhCR. Spatial resolution of the thermo-optical effect is typically constrained by the broad thermal profil…

利用光子分子实现适用于二维异质结的厚度不敏感纳米腔

Thickness Insensitive Nanocavities for 2D Heterostructures using Photonic Molecules

针对二维异质结厚度影响纳米腔谐振频率的问题，提出利用光子分子模式耦合的固有非线性实现厚度不敏感的腔模式，经理论分析与数值模拟验证其鲁棒性，可为相关敏感应用提供支撑。

From vertical-cavities to hybrid metal/photonic-crystal nanocavities: Towards high-efficiency nanolasers

We provide a numerical study showing that a bottom reflector is indispensable to achieve unidirectional emission from a photonic-crystal (PhC) nanolaser. First, we study a PhC slab nanocavity suspended over a flat mirror formed by a dielectric or metal substrate. We find that the laser's vertical emission can be enhanced by more than a factor of six compared with the device in the absence of the mirror. Then, we study the situation where the PhC nanocavity is in contact with a flat metal surface. The underlying metal substrate may serve as both an electrical current pathway and a heat sink, wh…

Dynamic modulation of photonic crystal nanocavities using gigahertz acoustic phonons

Photonic crystal membranes (PCM) provide a versatile planar platform for on-chip implementations of photonic quantum circuits. One prominent quantum element is a coupled system consisting of a nanocavity and a single quantum dot (QD) which forms a fundamental building block for elaborate quantum information networks and a cavity quantum electrodynamic (cQED) system controlled by single photons. So far no fast tuning mechanism is available to achieve control within the system coherence time. Here we demonstrate dynamic tuning by monochromatic coherent acoustic phonons formed by a surface acoust…

Transfer of arbitrary quantum emitter states to near-field photon superpositions in nanocavities

We present a method to analyze the suitability of particular photonic cavity designs for information exchange between arbitrary superposition states of a quantum emitter and the near-field photonic cavity mode. As an illustrative example, we consider whether quantum dot emitters embedded in "L3" and "H1" photonic crystal cavities are able to transfer a spin superposition state to a confined photonic superposition state for use in quantum information transfer. Using an established dyadic Green's function (DGF) analysis, we describe methods to calculate coupling to arbitrary quantum emitter posi…

铌酸锂光子纳米腔中电光调谐效率的无漂移表征

Drift-free characterization of electro-optic tuning efficiency in lithium niobate photonic nanocavities

针对铌酸锂纳米腔中直流漂移导致电光调谐效率表征不准的问题，提出一种高频三角波电压扫描的动态测量方法，实现了无漂移、可重复的调谐效率表征。

Realization of high-Q/V bichromatic photonic crystal cavities defined by an effective Aubry-André-Harper potential

We report on the design, fabrication and optical characterization of bichromatic photonic crystal cavities in thin silicon membranes, with resonances around 1550 nm wavelength. The cavity designs are based on a recently proposed photonic crystal implementation of the Aubry-André-Harper bichromatic potential, which relies on the superposition of two one-dimensional lattices with non-integer ratio between the periodicity constants. In photonic crystal nanocavities, this confinement mechanism is such that optimized figures of merit can be straightforwardly achieved, in particular an ultra-high-Q …

Genetic Optimization of Photonic Bandgap Structures

We investigate the use of a Genetic Algorithm (GA) to design a set of photonic crystals (PCs) in one and two dimensions. Our flexible design methodology allows us to optimize PC structures which are optimized for specific objectives. In this paper, we report the results of several such GA-based PC optimizations. We show that the GA performs well even in very complex design spaces, and therefore has great potential for use as a robust design tool in present and future applications.

Complete photonic bandgaps in supercell photonic crystals

We develop a class of supercell photonic crystals supporting complete photonic bandgaps based on breaking spatial symmetries of the underlying primitive photonic crystal. One member of this class based on a two-dimensional honeycomb structure supports a complete bandgap for an index-contrast ratio as low as $n_{high}/n_{low} = 2.1$, making this the first such 2D photonic crystal to support a complete bandgap in lossless materials at visible frequencies. The complete bandgaps found in such supercell photonic crystals do not necessarily monotonically increase as the index-contrast in the system …

用于高效圆偏振发射的光子纳米腔中强手性光物质相互作用的对称性控制

Symmetry control of strong chiral light matter interactions in photonic nanocavities for efficient circularly polarised emission

提出通过手性纳米腔与非手性分子间的对称性控制强光物质相互作用，形成电磁对映体以产生杂化手性极化激元态，从而无需复杂分子设计即可实现高效圆偏振发射。

Air-guiding photonic bandgap fiber with improved triangular air-silica photonic crystal cladding

We introduce a small-core air-guiding photonic crystal fiber whose cladding is made of improved air-silica photonic crystal with non-circular air holes placed in triangular lattice. The fiber achieves un-disturbed bandgap guidance over 350nm wavelength range.

High-Q optical nanocavities in bulk single-crystal diamond

Single-crystal diamond, with its unique optical, mechanical and thermal properties, has emerged as a promising material with applications in classical and quantum optics. However, the lack of heteroepitaxial growth and scalable fabrication techniques remain major limiting factors preventing more wide-spread development and application of diamond photonics. In this work, we overcome this difficulty by adapting angled-etching techniques, previously developed for realization of diamond nanomechanical resonators, to fabricate racetrack resonators and photonic crystal cavities in bulk single-crysta…

通过液晶纳米腔解锁近零介电常数超材料中的光学耦合可调性

Unlocking optical coupling tunability in epsilon-near-zero metamaterials through liquid crystal nanocavities

本研究利用高双折射液晶纳米腔和表面力仪，在ENZ超材料中实现了腔模耦合的主动调控与反交叉操控，为可调谐光子器件和片上光谱仪提供了新途径。

Efficient DNA-driven nanocavities for approaching quasi-deterministic strong coupling to a few fluorophores

Strong coupling between light and matter is the foundation of promising quantum photonic devices such as deterministic single photon sources, single atom lasers and photonic quantum gates, which consist of an atom and a photonic cavity. Unlike atom-based systems, a strong coupling unit based on an emitter-plasmonic nanocavity system has the potential to bring these devices to the microchip scale at ambient conditions. However, efficiently and precisely positioning a single or a few emitters into a plasmonic nanocavity is challenging. In addition, placing a strong coupling unit on a designated …

集成原子级薄片的纳米腔中模式位移的量子化

Quantization of mode shifts in nanocavities integrated with atomically thin sheets

本文研究二维材料与硅光子晶体纳米梁腔的集成，发现少层薄片因原子级精确厚度导致模式位移量子化，并实现腔体灵活重构，为二维材料集成光子器件提供新思路。

Microwave measurements of the photonic bandgap in a two-dimensional photonic crystal slab

We have measured the photonic bandgap in the transmission of microwaves through a two-dimensional photonic crystal slab. The structure was constructed by cementing acrylic rods in a hexagonal closed-packed array to form rectangular stacks. We find a bandgap centered at approximately 11 GHz, whose depth, width and center frequency vary with the number of layers in the slab, angle of incidence and microwave polarization.

Hosting exceptional points in 1D photonic bandgap waveguide for mode engineering

We report a planar 1D photonic bandgap waveguide exhibiting four second-order exceptional points (EP2s). The interactions between the selective pairs of supported quasi-guided TE modes are modulated by spatial distribution of transverse in-homogeneous gain-loss profile.

Maximizing bandgaps in two-dimensional photonic crystals: a variational algorithm

We present an algorithm for the maximization of photonic bandgaps in two-dimensional crystals. Once the translational symmetries of the underlying structure have been imposed, our algorithm finds a global maximal (and complete, if one exists) bandgap. Additionally, we prove two remarkable results related to maximal bandgaps: the so-called `maximum contrast' rule, and about the location in the Brillouin zone of band edges.

利用原子级薄材料实现自对准混合纳米腔

Self-aligned hybrid nanocavities using atomically thin materials

本文提出用二维材料薄片部分覆盖光子晶体波导以自对准形成混合纳米腔，在硅PhC波导上实现高达4.0×10^5的Q因子，并在MoTe₂器件中观察到约15倍的Purcell增强。

Observation of Complete Photonic Bandgap in Low Refractive Index Contrast Inverse Rod-Connected Diamond Structured Chalcogenides

Three-dimensional complete photonic bandgap materials or photonic crystals block light propagation in all directions. The rod-connected diamond structure exhibits the largest photonic bandgap known to date and supports a complete bandgap for the lowest refractive index contrast ratio down to $n_{high}/n_{low} \sim 1.9$. We confirm this threshold by measuring a complete photonic bandgap in the infrared region in Sn--S--O $(n\sim1.9)$ and Ge--Sb--S--O $(n\sim2)$ inverse rod-connected diamond structures. The structures were fabricated using a low-temperature chemical vapor deposition process via …

Generation of Low Divergent High Power Supercontinuum Through a Large Mode Area Photonic Bandgap Fiber

We report generation of broadband low divergent supercontinuum over the entire wavelength window of 1.5 to 3.5 μm from a 2.25 meter long effective single moded photonic bandgap fiber with mode area of 1100 μm2.

Fast-light Assisted Four-Wave-Mixing in Photonic Bandgap

Since the forward and backward waves are coupled with each other and a standing wave with no net propagation of energy is formed in the photonic bandgap, it is a commonsense of basic physics that, any kinds of effects associated with wave propagation including four-wave-mixing (FWM) are thought to be impossible. However, we lay great emphasis here on explaining that this commonsense could be broken under specific circumstances. In this article, we report with the first experimental observation of the energy conversion in the photonic bandgap into other channel via FWM. Owing to the phase manip…

Atomically smooth single-crystalline platform for low-loss plasmonic nanocavities

Nanoparticle-on-mirror plasmonic nanocavities, capable of extreme optical confinement and enhancement, have triggered state-of-the-art progress in nanophotonics and development of applications in enhanced spectroscopies and molecular detection. However, the optical quality factor and thus performance of these nanoconstructs are undermined by the granular polycrystalline metal films used as a mirror. Here, we report an atomically smooth single-crystalline platform for low-loss nanocavities using chemically-synthesized gold microflakes as a mirror. Nanocavities constructed using gold nanorods on…

Robustness of One-Dimensional Photonic Bandgaps Under Random Variations of Geometrical Parameters

The supercell method is used to study the variation of the photonic bandgaps in one-dimensional photonic crystals under random perturbations to thicknesses of the layers. The results of both plane wave and analytical band structure and density of states calculations are presented along with the transmission cofficient as the level of randomness and the supercell size is increased. It is found that higher bandgaps disappear first as the randomness is gradually increased. The lowest bandgap is found to persist up to a randomness level of 55 percent.

Design and experimental demonstration of optomechanical paddle nanocavities

We present the design, fabrication and initial characterization of a paddle nanocavity consisting of a suspended sub-picogram nanomechanical resonator optomechanically coupled to a photonic crystal nanocavity. The optical and mechanical properties of the paddle nanocavity can be systematically designed and optimized, and key characteristics including mechanical frequency easily tailored. Measurements under ambient conditions of a silicon paddle nanocavity demonstrate an optical mode with quality factor $Q_o$ ~ 6000 near 1550 nm, and optomechanical coupling to several mechanical resonances with…

一维光子带隙波导中的高阶共轭奇异点

Higher order Conjugate Exceptional Points in an 1D Photonic Bandgap Waveguide

本文在增益-损耗辅助的多模1D互补光子带隙波导中演示了三阶共轭奇异点(EPs)，揭示了参数化环绕三阶共轭EPs促进的高阶模式转换现象，展示了片上模式转换的潜力。

Gyrotropic Bandgaps, Degeneracy Lifting and Selective Suppression of Bloch States in Photonic Systems

Birefringent magnetophotonic crystals are found to exhibit degeneracy breaking for asymmetric contradirectional coupling in planar waveguides. Fundamental to high-order local normal mode coupling leads to partially overlapping gyrotropic bandgaps inside the Brillouin zone and partial suppression of Bloch mode propagation. A large magneto-optically active reorientation in polarization state is found for allowed Bloch modes at bandgap edges.

Deterministic coupling of site-controlled quantum emitters in monolayer semiconductors to plasmonic nanocavities

Solid-state single-quantum emitters are a crucial resource for on-chip photonic quantum technologies and require efficient cavity-emitter coupling to realize quantum networks beyond the single-node level. Previous approaches to enhance light-matter interactions rely on forming nanocavities around randomly located quantum dots or color centers but lack spatial control of the quantum emitter itself that is required for scaling. Here we demonstrate a deterministic approach to achieve Purcell-enhancement at lithographically defined locations using the sharp corner of a metal nanocube for both elec…

微流控通道中自组装超均匀系统的光子带隙特性

Photonic bandgap properties of hyperuniform systems self-assembled in a microfluidic channel

本研究通过微通道流体动力学过程生成超均匀无序图案结构，利用模拟表征光学带隙并确定产生PBG的最小介电对比度与最优条件，为大规模生产各向同性光子带隙材料提供了新途径。

Bandgap properties of low index contrast aperiodically ordered photonic quasicrystals

We numerically analyze, using Finite Difference Time Domain simulations, the bandgap properties of photonic quasicrystals with a low index contrast. We compared 8-, 10- and 12-fold symmetry aperiodically ordered lattices with different spatial tiling. Our results show that tiling design, more than symmetry, determines the transmission properties of these structures.

Approximate equivalence between guided modes in a low-contrast photonic bandgap fiber and Maxwell TM modes of a high-contrast two-dimensional photonic structure

We present a formal analogy between the eigenvalue problem for guided scalar modes in a low-contrast photonic bandgap fiber and quasi-stationary TM modes of a two-dimensional (2D) photonic structure. Using this analogy, we numerically study the confinement losses of disordered microstructured fibers through the leakage rate of an open 2D system with high refractive index inclusions. Our results show that for large values of the disorder, the confinement losses increase. However, they also suggest that losses might be improved in strongly disordered fibers by exploring ranges of physical parame…

Bandgap properties of two-dimensional low-index photonic crystals

We study the bandgap properties of two-dimensional photonic crystals created by a lattice of rods or holes conformed in a symmetric or asymmetric triangular structure. Using the plane-wave analysis, we calculate a minimum value of the refractive index contrast for opening both partial and full two-dimensional spectral gaps for both TM and TE polarized waves. We also analyze the effect of ellipticity of rods and holes and their orientation on the threshold value and the relative size of the bandgap.

Mode areas and field energy distribution in honeycomb photonic bandgap fibers

The field energy distributions and effective mode areas of silica-based photonic bandgap fibers with a honeycomb airhole structure in the cladding and an extra airhole defining the core are investigated. We present a generalization of the common effective area definition, suitable for the problem at hand, and compare the results for the photonic bandgap fibers with those of index-guiding microstructured fibers. While the majority of the field energy in the honeycomb photonic bandgap fibers is found to reside in the silica, a substantial fraction (up to ~30%) can be located in the airholes. Thi…

Photonic bandgap plasmonic waveguides

A novel type of a plasmonic waveguide has been proposed featuring an "open" design that is easy to manufacture, simple to excite and that offers a convenient access to a plasmonic mode. Optical properties of photonic bandgap (PBG) plasmonic waveguides are investigated experimentally by leakage radiation microscopy and numerically using the finite element method confirming photonic bandgap guidance in a broad spectral range. Propagation and localization characteristics of a PBG plasmonic waveguide have been discussed as a function of the wavelength of operation, waveguide core size and the numb…

Paving the way for third harmonic generation in hollow-core photonic bandgap fibers

We present two novel hybrid photonic structures made of silica that possess two well-separated frequency bandgaps. The addition of interstitial air holes in a precise location and size allows these bandgaps to open up with a ratio of ${\sim3}$ between their central frequencies at the air line ${ck_z/w=1}$, thus fulfilling the basic guidance condition for third harmonic generation in hollow-core fibers. In addition, these designs may serve as high-power laser delivery of two well-separated wavelengths, such as visible and near infrared.

Surface state photonic bandgap cavities

We propose and analyze a new type of a resonant high-Q cavity for lasing, sensing or filtering applications, which is based on a surface states of a finite photonic crystal. We demonstrate that such the cavity can have a Q factor comparable with that one of conventional photonic band-gap defect mode cavities. At the same time, the distinguished feature of the surface mode cavity is that it is situated directly at the surface of the photonic crystal. This might open up new possibilities for design of novel photonic devices and integration of photonic circuits.

Polarization properties of a symmetrical and asymmetrical nonreciprocal chiral photonic bandgap structure with defect

The polarization properties of perfectly periodical and defective one-dimensional photonic bandgap structures with nonreciprocal chiral (bi-isotropic) layers are studied. The method of solution is based on the 2x2-block-representation transfer-matrix formulation. Numerical simulations are carried out for different type of structures (symmetrical or asymmetrical) in order to reveal the dependence of the reflection and transmission coefficients on frequency, chirality, nonreciprocity parameters, and the angle of wave incidence.