Cooperative communications is a class of techniques which seek to improve reliability and throughput in wireless systems by pooling the resources of distributed nodes. While cooperation can occur at different network layers and time scales, physical layer cooperation at symbol time scales offers the largest benefit in combating losses due to fading. However, symbol level cooperation poses significant implementation challenges, especially in synchronizing the behaviors and carrier frequencies of distributed nodes. We present the implementation and characterization of a complete, real-time cooperative physical layer transceiver built on the Rice Wireless Open-Access Research Platform (WARP). In our implementation autonomous nodes employ physical layer cooperation without a central synchronization source, and are capable of selecting between non-cooperative and cooperative communication per packet. Cooperative transmissions use a distributed Alamouti space-time block code and employ either amplify-and-forward or decode-and-forward relaying. We also present experimental results of our transceiver's real-time performance under a variety of topologies and propagation conditions. Our results clearly demonstrate significant performance gains (more than 40x improvement in PER in some topologies) provided by physical layer cooperation, even when subject to the constraints of a real-time implementation. We also present methodologies to isolate and understand the sources of performance bottlenecks in our design. As with all our work on WARP, our transceiver design and experimental framework are available via the open-source WARP repository for use by other wireless researchers.
Radio frequency (RF) energy transfer and harvesting has been intensively studied recently as a promising approach to significantly extend the lifetime of energy-constrained wireless networks. This technique has a great potential to provide relatively stable and continuous RF energy to devices wirelessly; it thus opened a new research paradigm, termed wireless-powered communication (WPC), which has raised many new research opportunities with wide applications. Among these, the design and analysis of cooperative schemes towards efficient WPC have attracted tremendous research interests nowadays.…
Ambient backscatter communication has shown great potential in the development of future wireless networks. It enables a backscatter transmitter (BTx) to send information directly to an adjacent receiver by modulating over ambient radio frequency (RF) carriers. In this paper, we consider a cooperative ambient backscatter communication system where a multi-antenna cooperative receiver separately decodes signals from an RF source and a BTx. Upper bounds of the ergodic rates of both links are derived. The power scaling laws are accordingly characterized for both the primary cellular transmission …
This work presents a novel diffusion based dual-phase molecular communication system where the source leverages multiple cooperating nanomachines to improve the end-to-end reliability of communication. The Neyman-Pearson Likelihood Ratio Tests are derived for each of the cooperative as well as the destination nanomachines in the presence of multi-user interference. Further, to characterize the performance of the aforementioned system, closed form expressions are derived for the probabilities of detection, false alarm at the individual cooperative, destination nanomachines, as well as the overa…
In this letter we consider resource allocation for OFDMA-based secure cooperative communication by employing a trusted Decode and Forward (DF) relay among the untrusted users. We formulate two optimization problems, namely, (i) sum rate maximization subject to individual power constraints on source and relay, and (ii) sum power minimization subject to a fairness constraint in terms of per-user minimum support secure rate requirement. The optimization problems are solved utilizing the optimality of KKT conditions for pseudolinear functions.
Device-to-Device (D2D) communications can increase the throughput of cellular networks significantly, where the interference among D2D links should be properly managed. In this paper, we propose an opportunistic cooperative D2D transmission strategy by exploiting the caching capability at the users to deal with the interference among D2D links. To increase the cooperative opportunity and improve spatial reuse gain, we divide the D2D users into clusters and cache different popular files at the users within a cluster, and then find the optimal cluster size. To maximize the network throughput, we…
This paper reports relative performance of decode-and-forward (DF) and amplify-and-forward (AF) relaying in a multi-antenna cooperative cognitive radio network (CCRN) that supports device-to-device (D2D) communications using spectrum sharing technique in cellular network. In this work, cellular system is considered as primary and internet of things devices (IoDs), engaged in D2D communications, are considered to be secondary system. The devices access the licensed spectrum by means of the cooperation in two-way primary communications. Furthermore, IoDs are energized by harvesting the energy fr…
To realize cooperative computation and communication in a relay mobile edge computing system, we develop a hybrid relay forward protocol, where we seek to balance the execution delay and network energy consumption. The problem is formulated as a nondifferentible optimization problem which is nonconvex with highly coupled constraints. By exploiting the problem structure, we propose a lightweight algorithm based on inexact block coordinate descent method. Our results show that the proposed algorithm exhibits much faster convergence as compared with the popular concave-convex procedure based algo…
Parking lots (PLs) are usually full with cars. If these cars are formed into a self-organizing vehicular network, they can be new kind of road side units (RSUs) in urban area to provide communication data forwarding between mobile terminals nearby and a base station. However cars in PLs can leave at any time, which is neglected in the existing studies. In this paper, we investigate relay cooperative communication based on parked cars in PLs. Taking the impact of the car's leaving behavior into consideration, we derive the expressions of outage probability in a two-hop cooperative communication…
To achieve the potential in providing high throughput for cellular networks by device-to-device (D2D) communications, the interference among D2D links should be carefully managed. In this paper, we propose an opportunistic cooperation strategy for D2D transmission by exploiting the caching capability at the users to control the interference among D2D links. We consider overlay inband D2D, divide the D2D users into clusters, and assign different frequency bands to cooperative and non-cooperative D2D links. To provide high opportunity for cooperative transmission, we introduce a caching policy. …
This paper considers a cooperative device-to-device (D2D) communication system, where the D2D transmitters (DTs) act as relays to assist cellular users (CUs) in exchange for the opportunities to use licensed spectrum. Based on the interaction of each D2D pair and each CU, we formulate the pairing problem between multiple cues and multiple D2D pairs as a one-to-one matching game. Unlike most existing works, we consider a realistic scenario with incomplete channel information. Thus, each CU lacks enough information to establish its preference over D2D pairs. Therefore, traditional matching algor…
Considering two users exchange computational results through a two-way relay equipped with a mobile-edge computing server, we investigate the joint optimization problem of cooperative communication and computation, whose objective is the total energy consumption minimization subject to the delay constraint. To derive the low-complexity optimal solution, by assuming that the transmit power of the relay is given, we theoretically derive the optimal values of computation task partition factors. Thus, the optimal solution to the total energy consumption minimization problem can be found by one-dim…
We consider secure communication over a two-user Gaussian interference channel, where each transmitter sends a confidential message to its legitimate receiver. For this setting, we identify a regime where the simple scheme of using Gaussian wiretap codebook at each transmitter (without cooperative jamming) and treating interference as noise at each intended receiver (in short, GWC-TIN scheme) achieves the optimal secure sum capacity to within a constant gap. The results are proved by first considering the deterministic interference channel model and identifying a regime in which a simple schem…
Diffusion-based molecular communication (MC) systems experience significant reliability losses. To boost the reliability, an MC scheme where multiple receivers (RXs) work cooperatively to decide the signal of a transmitter (TX) by sending the same type of molecules to a fusion center (FC) is proposed in this paper. The FC observes the total number of molecules received and compares this number with a threshold to determine the TX's signal. The proposed scheme is more bio-realistic and requires relatively low computational complexity compared to existing cooperative schemes where the RXs send a…
In this paper, symbol-by-symbol maximum likelihood (ML) detection is proposed for a cooperative diffusion-based molecular communication (MC) system. In this system, a fusion center (FC) chooses the transmitter's symbol that is more likely, given the likelihood of the observations from multiple receivers (RXs). We propose three different ML detection variants according to different constraints on the information available to the FC, which enables us to demonstrate trade-offs in their performance versus the information available. The system error probability for one variant is derived in closed …
This paper presents a new cooperative jamming approach to secure the unmanned aerial vehicle (UAV) communication by leveraging jamming from other nearby UAVs to defend against the eavesdropping. In particular, we consider a two-UAV scenario when one UAV transmitter delivers the confidential information to a ground node (GN), and the other UAV jammer cooperatively sends artificial noise (AN) to confuse the ground eavesdropper for protecting the confidentiality of the data transmission. By exploiting the fully-controllable mobility, the two UAVs can adaptively adjust their locations over time (a…
This paper investigates the cooperative full-duplex device-to-device (D2D) communication underlaying cellular network, where the cellular user (CU) acts as a full-duplex relay to assist the D2D communication. To simultaneously support D2D relaying and uplink transmission, superposition coding and successive interference cancellation are adopted at the CU and the D2D receiver, respectively. The achievable rate region and joint outage probability are derived to characterize the performance of the considered system. An optimal power allocation scheme is proposed to maximize the minimum achievable…
Numerous studies claim that terahertz (THz) communication will be an essential piece of sixth-generation wireless communication systems. Its promising potential also comes with major challenges, in particular the reduced coverage due to harsh propagation loss, hardware constraints, and blockage vulnerability. To increase the coverage of THz communication, we revisit cooperative communication. We propose a new type of cooperative rate-splitting (CRS) called extraction-based CRS (eCRS). Furthermore, we explore two extreme cases of eCRS, namely, identical eCRS and distinct eCRS. To enable the pro…
This paper investigates the covert communications via cooperative jamming and relay selection in a wireless relay system, where a source intends to transmit a message to its destination with the help of a selected relay, and a warden attempts to detect the existence of wireless transmissions from both the source and relay, while friendly jammers send jamming signals to prevent warden from detecting the transmission process. To this end, we first propose two relay selection schemes, namely random relay selection (RRS) and max-min relay selection (MMRS), as well as their corresponding cooperativ…
Semantic-Forward Relaying: A Novel Framework Towards 6G Cooperative Communications
Northwestern Polytechnical University（西北工业大学）；University of Houston（休斯顿大学）；Kyung Hee University（庆熙大学）；IMT-Atlantique（IMT-大西洋）；Japan Advanced Institute of Science Technology（日本先端科学技术大学院大学）；University of Oulu（奥卢大学）
In this paper, we consider a wireless-powered cooperative communication network, which consists of a hybrid access-point (AP), a hybrid relay, and an information source. In contrast to the conventional cooperative networks, the source in the considered network is assumed to have no embedded energy supply. Thus, it first needs to harvest energy from the signals broadcast by the AP and/or relay, which have constant power supply, in the downlink (DL) before transmitting the information to the AP in the uplink (UL). The hybrid relay can not only help to forward information in the UL but also charg…
The performance of cooperative ambient backscatter communications (CABC) can be enhanced by employing reconfigurable intelligent surface (RIS) to assist backscatter transmitters. Since the RIS power consumption is a non-negligible issue, we consider a RIS assisted CABC system where the RIS with energy harvesting circuit can not only reflect signal but also harvest wireless energy. We study a transmission design problem to minimize the RIS power consumption with the quality of service constraints for both active and backscatter transmissions. The optimization problem is a mixed-integer non-conv…
This letter investigates a wireless communication system deploying distributed reconfigurable intelligent surfaces (RISs). Existing works have assumed that perfect timing synchronization is available among all the cooperative RISs. For practical considerations, we first study cooperative reflection design for multi-RIS-aided communication systems taking into account timing synchronization errors. We aim to minimize the mean-squared error of the recovered data in the presence of timing offsets subject to the unit modulus constraints imposed on the phase shifts of the RISs. In order to handle th…
In mutualistic cooperative ambient backscatter communications (AmBC), Internet-of-Things (IoT) device sends its information to a desired receiver by modulating and backscattering the primary signal, while providing beneficial multipath diversity to the primary receiver in return, thus forming a mutualism relationship between the AmBC and primary links. We note that the hardware impairments (HIs), which are unavoidable in practical systems and may significantly affect the transmission rates of the primary and AmBC links and their mutualism relationships, have been largely ignored in the study o…
Non-orthogonal multiple access (NOMA) is a promising radio access technique for next-generation wireless networks. In this article, we investigate the NOMA-based cooperative relay network. We begin with an introduction of the existing relay-assisted NOMA systems by classifying them into three categories: uplink, downlink, and composite architectures. Then, we discuss their principles and key features, and provide a comprehensive comparison from the perspective of spectral efficiency, energy efficiency, and total transmit power. A novel strategy termed hybrid power allocation is further discuss…
In this paper, a cooperative diffusion-based molecular communication system is considered where distributed receivers collaboratively determine a transmitter's signal. In this system, the receivers first make local hard decisions about the current transmitted bit and then report these decisions to a fusion center (FC). The FC combines the local hard decisions to make a global decision using an N-out-of-K fusion rule. Asymmetric and symmetric topologies are considered and for each topology, two reporting scenarios, namely, perfect reporting and noisy reporting, are addressed. Closed-form analyt…
We analyze a cooperative wireless communication system with finite block length and finite battery energy, under quasi-static Rayleigh fading. Source and relay nodes are powered by a wireless energy transfer (WET) process, while using the harvested energy to feed their circuits, send pilot signals to estimate channels at receivers, and for wireless information transmission (WIT). Other power consumption sources beyond data transmission power are considered. The error probability is investigated under perfect/imperfect channel state information (CSI), while reaching accurate closed-form approxi…
Power line communication (PLC) exploits the existence of installed infrastructure of power delivery system, in order to transmit data over power lines. In PLC networks, different nodes of the network are interconnected via power delivery transmission lines, and the data signal is flowing between them. However, the attenuation and the harsh environment of the power line communication channels, makes it difficult to establish a reliable communication between two nodes of the network which are separated by a long distance. Relaying and cooperative communication has been used to overcome this prob…
In this paper, we consider a wireless-powered cooperative communication network consisting of one hybrid access-point (AP), one source, and one relay. In contrast to conventional cooperative networks, the source and relay in the considered network have no embedded energy supply. They need to rely on the energy harvested from the signals broadcasted by the AP for their cooperative information transmission. Based on this three-node reference model, we propose a harvest-then-cooperate (HTC) protocol, in which the source and relay harvest energy from the AP in the downlink and work cooperatively i…
In this paper, symbol-by-symbol maximum likelihood (ML) detection is proposed for a cooperative diffusion-based molecular communication (MC) system. In this system, the transmitter (TX) sends a common information symbol to multiple receivers (RXs) and a fusion center (FC) chooses the TX symbol that is more likely, given the likelihood of its observations from all RXs. The transmission of a sequence of binary symbols and the resultant intersymbol interference are considered in the cooperative MC system. Three ML detection variants are proposed according to different RX behaviors and different k…
In this paper, error performance of the cooperative communication systems with the best relay selection scheme is investigated in the presence of error propagation from role to destination. The error propagation expression is derived firstly when the best relay is selected within M relays. The derived end-to-end BER expression is verified with the computer simulations. It is shown that the best relay selection does not ensure M+1 diversity order under the error propagation unlike perfect decoding. In addition, the threshold selection for the relays has dominant effect on the error performance …
Molecular communication underpins nano-scale communications in nanotechnology. The combination of multinanomachines to form nano-networks is one of the main enabling methods. Due to the importance of source localization in establishing nano-networks, this paper proposes a cooperative source localization method for Molecular Communication via Diffusion (MCvD) systems using multiple spherical absorption receivers. Since there is no exact mathematical expression of the channel impulse response for multiple absorbing receivers, we adopt an empirical expression and use Levenberg-Marquardt method to…
In this paper, we consider simultaneous wireless information and power transfer (SWIPT) in multi-relay assisted two-hop relay system, where multiple relay nodes simultaneously assist the transmission from source to destination using the concept of distributed space-time coding. Each relay applies power splitting protocol to coordinate the received signal energy for information decoding and energy harvesting. The optimization problems of power splitting ratios at the relays are formulated for both decode-and-forward (DF) and amplify-and-forward (AF) relaying protocols. Efficient algorithms are …
This paper studies the secrecy rate maximization problem of a secure wireless communication system, in the presence of multiple eavesdroppers. The security of the communication link is enhanced through cooperative jamming, with the help of multiple jammers. First, a feasibility condition is derived to achieve a positive secrecy rate at the destination. Then, we solve the original secrecy rate maximization problem, which is not convex in terms of power allocation at the jammers. To circumvent this non-convexity, the achievable secrecy rate is approximated for a given power allocation at the jam…
Perfect channel state information (CSI) is usually required when considering relay selection and power allocation in cooperative communication. However, it is difficult to get an accurate CSI in practical situations. In this letter, we study the outage probability minimizing problem based on optimizing relay selection and transmission power. We propose a prioritized experience replay aided deep deterministic policy gradient learning framework, which can find an optimal solution by dealing with continuous action space, without any prior knowledge of CSI. Simulation results reveal that our appro…
In the next few years, the development of wireless communication systems propel the world into a fully connected society where the Machine-type Communications (MTC) plays a substantial role as key enabler in the future cellular systems. MTC is categorized into mMTC and uMTC, where mMTC provides the connectivity to massive number of devices while uMTC is related to low latency and ultra-high reliability of the wireless communications. This paper studies uMTC with incremental relaying technique, where the source and relay collaborate to transfer the message to a destination. In this paper, we co…
In this paper, a cooperative communication network based on energy-harvesting (EH) decode-and-forward (DF) relays that harvest energy from the ambience using buffers with harvest-store-use (HSU) architecture is considered. An opportunistic routing (OR) protocol, which selects the transmission path of packet based on the node transmission priority, is proposed to improve data delivery in this network. Additionally, an algorithm based on state transition matrix (STM) is proposed to obtain the probability distribution of the candidate broadcast node set. Based on the probability distribution, the…
