Huanyang Chen, Ulf Leonhardt, Tomas Tyc
Conformal invisibility devices are only supposed to work within the validity range of geometrical optics. Here we show by numerical simulations and analytical arguments that for certain quantized frequencies they are nearly perfect even in a regime that clearly violates geometrical optics. The quantization condition follows from the analogy between the Helmholtz equation and the stationary Schrodinger equation.
机构、总结、中文摘要均由AI分析而来，可能存在错误，请以论文正文为准。
继续探索
We introduce a class of conformal versions of the previously introduced quasi-conformal carpet cloak, and show how to construct such conformal cloaks for different cloak shapes. Our method provides exact refractive-index profiles in closed mathematical form for the usual carpet cloak as well as for other shapes. By analyzing their asymptotic behavior, we find that the performance of finite-size cloaks becomes much better for metal shapes with zero average value, e.g., for gratings.
The original carpet cloak [Phys. Rev. Lett. 101, 203901 (2008)] was designed by a numerical method, the quasi-conformal mapping. Therefore its refractive index profile was obtained numerically. In this letter, we propose a new carpet cloak based on the optical conformal mapping, with an analytical form of a refractive index profile, thereby facilitating future experimental designs.
In the past years quasi-conformal mapping has been typically used to design broadband electromagnetic cloaks. However, this technique has some inherit practical limitations such as the lateral beam shift, rendering the device visible or difficult to hide a large object. In this work we circumvent these issues by using strict conformal mapping to build the first isotropic cloak. Microwave near-field measurement shows that our device (with dielectric constant larger than unity everywhere) has a very good cloaking performance and a broad frequency response. The present dielectric approach could b…
Grating cloaks are a variation of dielectric carpet (or ground- plane) cloaks. The latter were introduced by Li and Pendry. In contrast to the numerical work involved in the quasi-conformal carpet cloak, the refractive-index profile of a conformal grating cloak follows a closed and exact analytical form. We have previously mentioned that finite-size conformal grating cloaks may exhibit better cloaking than usual finite-size carpet cloaks. In this letter, we directly visualize their performance using photorealistic ray-tracing simulations. We employ a Newtonian approach that is advantageous com…
As invisibility cloaking has recently become experimental reality, it is interesting to explore ways to reveal remaining imperfections. In essence, the idea of most invisibility cloaks is to recover the optical path lengths without an object (to be made invisible) by a suitable arrangement around that object. Optical path length is proportional to the time of flight of a light ray or to the optical phase accumulated by a light wave. Thus, time-of-flight images provide a direct and intuitive tool for probing imperfections. Indeed, recent phase-sensitive experiments on the carpet cloak have alre…
Transformation optics is a design tool that connects geometry of space and propagation of light. Invisibility cloaking is a corresponding benchmark example. Recent experiments at optical frequencies have demonstrated cloaking for the light amplitude ("ray cloaking"). In this Letter, we demonstrate far-field cloaking of the light phase ("wave cloaking") by interferometric microscope-imaging experiments on the previously introduced three-dimensional carpet cloak at 700-nm wavelength and for arbitrary polarization of light.
Invisibility or cloaking has captured human's imagination for many years. With the recent advancement of metamaterials, several theoretical proposals show cloaking of objects is possible, however, so far there is a lack of an experimental demonstration at optical frequencies. Here, we report the first experimental realization of a dielectric optical cloak. The cloak is designed using quasi-conformal mapping to conceal an object that is placed under a curved reflecting surface which imitates the reflection of a flat surface. Our cloak consists only of isotropic dielectric materials which enable…
Invisibility cloaks of light, which used to be confined to the imagination, have now been turned into a scientific reality, thanks to the enabling theoretical tools of transformation optics and conformal mapping. Inspired by those theoretical works, the experimental realisation of electromagnetic invisibility cloaks has been reported at various electromagnetic frequencies. All the invisibility cloaks demonstrated thus far, however, have relied on nano- or micro-fabricated artificial composite materials with spatially varying electromagnetic properties, which limit the size of the cloaked regio…
We propose a generalization of the two-dimensional eikonal-limit cloak derived from a conformal transformation to three dimensions. The proposed cloak is a spherical shell composed of only isotropic media; it operates in the transmission mode and requires no mirror or ground plane. Unlike the well-known omnidirectional spherical cloaks, it may reduce visibility of an arbitrary object only for a very limited range of observation angles. In the short-wavelength limit, this cloaking structure restores not only the trajectories of incident rays, but also their phase, which is a necessary ingredien…
In this work we theoretically propose scattering cancellation-based cloaks for heat waves that obey the Maxwell-Cattaneo equation. The proposed cloaks possess carefully tailored diffusivity to cancel the dipole scattering from the object that they surround, and thus can render a small object invisible in the near and far fields, as demonstrated by full-wave finite-element simulations. Mantle heat cloaking is further analyzed and proposed to simplify the design and bring this cloaking technology one step closer to its practical implementation, with promising applications in nanoelectronics and …
Non-Euclidean geometry combined with transformation optics has recently led to the proposal of an invisibility cloak that avoids optical singularities and therefore can work, in principle, in a broad band of the spectrum [U. Leonhardt and T. Tyc, Science 323, 110 (2009)]. Such a cloak is perfect in the limit of geometrical optics, but not in wave optics. Here we analyze, both analytically and numerically, full wave propagation in non-Euclidean cloaking. We show that the cloaking device performs remarkably well even in a regime beyond geometrical optics where the device is comparable in size wi…
We report an invisibility carpet cloak device, which is capable of making an object undetectable by visible light. The cloak is designed using quasi conformal mapping and is fabricated in a silicon nitride waveguide on a specially developed nano-porous silicon oxide substrate with a very low refractive index. The spatial index variation is realized by etching holes of various sizes in the nitride layer at deep subwavelength scale creating a local effective medium index. The fabricated device demonstrates wideband invisibility throughout the visible spectrum with low loss. This silicon nitride …
A new recipe for concealing objects from detection is suggested. Different with traditional cloak which deflects light around the core of the cloak to make the object inside invisible, our cloak guides the light to penetrate the core of the cloak but without striking some region of the cloak shell - the so called folded region. Full wave analytical calculation shows that this cloak will lead to a scattering enhancement instead of scattering reduction in contrast to the traditional cloak; the scattered field distribution can also be changed as if the scatterer is moved from its original positio…
Artificially structured metamaterials have enabled unprecedented flexibility in manipulating electromagnetic waves and producing new functionalities, including the cloak of invisibility based on coordinate transformation. Here we present the design of a non-magnetic cloak operating at optical frequencies. The principle and structure of the proposed cylindrical cloak are analyzed, and the general recipe for the implementation of such a device is provided. The cloaking performance is verified using full-wave finite-element simulations.
Invisibility devices based on coordinate transformation have opened up a new field of considerable interest. Such a device is proposed to render the hidden object undetectable under the flow of light or sound, by guiding and controlling the wave path through an engineered space surrounding the object. We present here the first practical realization of a low-loss and broadband acoustic cloak for underwater ultrasound. This metamaterial cloak is constructed with a network of acoustic circuit elements, namely serial inductors and shunt capacitors. Our experiment clearly shows that the acoustic cl…
Coordinate-transformation cloaking is based on the design of a metamaterial shell made of an anisotropic, spatially inhomogeneous "transformation medium" that allows rerouting the impinging wave around a given region of space. In its original version, it is generally believed that, in the ideal limit, the radiation cannot penetrate the cloaking shell (from outside to inside, and viceversa). However, it was recently shown by Chen et al. that electromagnetic fields may actually penetrate the cloaked region, provided that this region contains double-negative transformation media which, via proper…
Based on the concept of complementary media, we propose an invisibility cloak operating at a finite frequency that can cloak an object with a pre-specified shape and size within a certain distance outside the shell. The cloak comprises of a dielectric core, and an "anti-object" embedded inside a negative index shell. The cloaked object is not blinded by the cloaking shell since it lies outside the cloak. Full-wave simulations in two dimensions have been performed to verify the cloaking effect.
Ray-tracing exercise and full-wave analysis were performed to validate the performance of a new type of cloak composed of isotropic metamaterials. It is shown that objects inside the folded region of this cloak appear invisible to the incoming light from a ray tracing exercise, but exhibit magnified and shifted scattering under a plane wave illumination from a full wave analysis. Gaussian beams are introduced to resolve this interesting paradox resulted from these two methods. We show that at the time-harmonic state, small energy can be diffracted into the folded region and contribute to the r…
Considered to only exist in the fairy tales in the past, invisibility cloaks have been successively converted into reality no matter in the spatial domain or temporal domain. Inspired by the spatial cloaking, time gaps are utilized to hide temporal events. However, a sophisticated synchronization for cloaking is indispensable in these cloaking techniques, therefore leaving inconvenience for the realization of the temporal cloak. Here, by exploiting temporal Talbot effect, we propose a brand new scheme and concept to achieve a temporal cloak without any synchronization for cloaking process, und…
It was proposed that perfect invisibility cloaks can be constructed for hiding objects from electromagnetic illumination (Pendry et al., Science 312, p. 1780). The cylindrical cloaks experimentally demonstrated (Schurig et al., Science 314, p. 997) and proposed (Cai et al., Nat. Photon. 1, p. 224) have however simplified material parameters in order to facilitate easier realization as well as to avoid infinities in optical constants. Here we show that the cylindrical cloaks with simplified material parameters inherently allow the zeroth-order cylindrical wave to pass through the cloak as if th…
An inverse way to define the parameters of ideal cylindrical cloaks is developed, in which the interconnection between the parameters is revealed for the first time without knowing a specific coordinate transformation. The required parameters are derived in terms of the integral form of cloaking generators, which is very general and allows us to examine the significance of the parametric profiles. The validity of such inverse way and the invisibility characteristics are presented in full-wave numerical simulation of plane wave scattering by cloaked cylinders.
The electromagnetic field solution for a spherical invisibility cloak with an active device inside is established. Extraordinary electric and magnetic surface voltages are induced at the inner boundary of a spherical cloak, which prevent electromagnetic waves from going out. The phase and handness of polarized waves obliquely incident on such boundaries is kept in the reflected waves. The surface voltages due to an electric dipole inside the concealed region are found equal to the auxiliary scalar potentials at the inner boundary, which consequently gain physical counterparts in this case.
The electromagnetic characteristics of plane-transformed invisibility cloaks are quantitatively studied in this paper. We take elliptical cylindrical cloak as the example, and use an elliptical cylindrical wave expansion method to obtain the scattered field. It is demonstrated that an ideal elliptical cylindrical cloak is inherently visible. Noticeable field scattering and penetration will be induced when the cloak is exposed directly to an electromagnetic wave. However, as long as the cloak consists of a perfect electric conducting lining at the interior surface, perfect invisibility can stil…
Spacetime or `event' cloaking was recently introduced as a concept, and the theoretical design for such a cloak was presented for illumination by electromagnetic waves [McCall, Favaro, Kinsler, Boardman 2011]. Here we describe how event cloaks can be designed for simple wave systems, using either an approximate `speed cloak' method, or an exact full-wave one. Further, we discuss in detail many of the implications of spacetime transformation devices, covering their (usually) directional nature, spacetime distortions (as opposed to cloaks), and how leaky cloaks manifest themselves. We also addre…
An analytical method of electromagnetic wave interactions with a general radially anisotropic cloak is established. It is able to deal with arbitrary parameters ($ε_r(r)$, $μ_r(r)$, $ε_t(r)$ and $μ_t(r)$) of a radially anisotropic inhomogeneous shell. The general cloaking condition is proposed from the wave relations for the first time. We derive the parameters of a novel class of spherical nonlinear cloaks and examine its invisibility performance by the proposed method at various nonlinear situations. Spherical metamaterial cloaks with improved invisibility performance is achieved with optima…
The invisibility cloak has been a long-standing dream for many researchers over the decades. By transforming space and light propagation, a three-dimensional (3D) object can be perceived as having reduced number of dimensions, in the form of points, lines, and thin sheets, making it "undetectable" judging from scattered field. Although a variety of cloaking devices have been reported at microwave and optical frequencies, the Terahertz (THz) domain remains unexplored. Moreover, it should be noted that all the previous experimental demonstrations are performed in a two-dimensional (2D) waveguide…
Invisibility cloaks, a subject that usually occurs in science fiction and myths, have attracted wide interest recently because of their possible realization. The biggest challenge to true invisibility is known to be the cloaking of a macroscopic object in the broad range of wavelengths visible to the human eye. Here we experimentally solve this problem by incorporating the principle of transformation optics into a conventional optical lens fabrication with low-cost materials and simple manufacturing techniques. A transparent cloak made of two pieces of calcite is created. This cloak is able to…
By investigating wave properties at cloak boundaries, invisibility cloaks with arbitrary shape constructed by general coordinate transformations are confirmed to be perfectly invisible to the external incident wave. The differences between line transformed cloaks and point transformed cloaks are discussed. The fields in the cloak medium are found analytically to be related to the fields in the original space via coordinate transformation functions. At the exterior boundary of the cloak, it is shown that no reflection is excited even though the permittivity and permeability do not always have a…
Invisibility cloak is drawing much attention due to its special camouflage when exposed to physical field varing from wave (electromagnetic field, acoustic field, elastic wave, etc.) to scalar field (thermal field, static magnetic field, dc electric field and mass diffusion). Here, an electrostatic field invisibility cloak has been theoretically investigated, and experimentally demonstrated for the first time to perfectly hide a certain region from sight without disturbing the external electrostatic field. The desired cloaking effect has been achieved via both scattering cancelling technology …
We propose a scheme to detect the diffusive cloak proposed by Schittny et al [Science 345, 427 (2014)]. We exploit the fact that diffusion of light is an approximation that disregards wave interference. The long-range contribution to intensity correlation is sensitive to locations of paths crossings and the interference inside the medium, allowing one to detect the size and position, including the depth, of the diffusive cloak. Our results also suggest that it is possible to separately manipulate the first- and the second-order statistics of wave propagation in turbid media.
In this paper, we review the methodology of transformation optics, which can construct invisibility cloak through the transformation of coordinates based on the form invariance of Maxwell's equations. Three different ways to define the components of electromagnetic fields are compared for removing some ambiguities. The analytical expressions of light-ray and wave-normal ray are derived in spherical and cylindrical ideal invisibility cloaks created with any continuous radial transformation functions, and their physical interpretation is also given. Using the duality principle in anisotropic med…
Very recently Farhat et al. [1] have suggested that arrays of invisibility cloaks may find important applications in low-interference communication, noninvasive probing, sensing and communication networks, etc. We report on the first experimental realization of such an array of broadband invisibility cloaks, which operates in the visible frequency range. Wavelength and angular dependencies of the cloak array performance have been studied.
We propose one kind of transformation functions for nonmagnetic invisibility cloak with minimized scattering on the basis of generalized transformation. By matching the impedance at the outer surface of the cloak, the transformations with two parameters are determined. To confirm the performance of the cloak, full wave simulation based on the finite element method is carried out. Furthermore, total scattering cross section is computed to better illustrate the scattering characteristics of cloak with different parameters. In addition, based on the effective media theory, alternating layered sys…
We demonstrate in this letter a unique approach for watching outside while hiding in a carpet cloaking based on transformation optics. Unlike conventional carpet cloaking, which screens all the incident electromagnetic waves, we break the cloak and allow incident light get into the carpet. Hence outside information is detected inside the cloak. To recover the invisible cloaking, complementary techniques are applied in the broken space. Consequently, a hiding-inside-and-watching-outside (HIWO) carpet cloak is sewed, which works as a perfectly invisible cloaking and allows surveillance of the ou…
We present the design, fabrication and performance test of a quasi three-dimensional carpet cloak made of normal dielectric in the microwave regime. Taking advantage of a simple linear coordinate transformation we design a carpet cloak with homogeneous anisotropic medium and then practically realize the device with multilayer of alternating normal dielectric slabs based on the effective medium theory. As a proof-of-concept example, we fabricate the carpet cloak with multilayer of FR4 dielectric slabs with air spacing. The performance of the fabricated design is verified through full-wave numer…
A cylindrical wave expansion method is developed to obtain the scattering field for an ideal two-dimensional cylindrical invisibility cloak. A near-ideal model of the invisibility cloak is set up to solve the boundary problem at the inner boundary of the cloak shell. We confirm that a cloak with the ideal material parameters is a perfect invisibility cloak by systematically studying the change of the scattering coefficients from the near-ideal case to the ideal one. However, due to the slow convergence of the zero$^{th}$ order scattering coefficients, a tiny perturbation on the cloak would ind…
Recently, invisible cloaks have attracted much attention due to their exciting property of invisibility, which are based on a solid theory of transformation optics and quasi-conformal mapping. Two kinds of cloaks have been proposed: free-space cloaks, which can render objects in free space invisible to incident radiation, and carpet cloaks (or ground cloaks), which can hide objects under the conducting ground. The first free-space and carpet cloaks were realized in the microwave frequencies using metamaterials. The free-space cloak was composed of resonant metamaterials, and hence had restrict…
Broadband source-surrounded cloak for on-chip antenna radiation pattern protection
本研究提出了一种宽频带源周围隐身 cloak，利用无色散空气-阻抗匹配超材料实现电磁波绕过障碍物，保护芯片天线辐射图案不受散射影响，提升集成电路集成度和通信系统稳定性。
We investigate a general class of electromagnetic devices created with any continuous transformation functions by rigorously calculating the analytical expressions of the electromagnetic field in the whole space. Some interesting phenomena associated with these transformation devices, including the invisibility cloaks, concentrators, and field rotators, are discussed. By carefully choosing the transformation function, we can realize cloaks which are insensitive to perturbations at both the inner and outer boundaries. Furthermore, we find that when the coating layer of the concentrator is reali…
Transformation optics (TO) has recently become a useful methodology in the design of unusual optical devices, such as novel metamaterial lenses and invisibility cloaks. Very recently Danner et al. [1] have suggested theoretical extension of this approach to birefrigent TO devices, which perform useful and different functions for mutually orthogonal polarization states of light. Theoretical designs which operate as invisibility cloak for one polarization while behaving as a Luneburg lens for another orthogonal polarization have been suggested. Here we report the first experimental realization o…
The GL electromagnetic (EM) modeling is used to simulate the 3D EM full wave field propagation through cloaks. The 3D GL simulation of the EM wave field excited by a point source outside of the cloaks has been done. The simulation of the EM wave field from the point source excitation inside of the cloak device is presented in this paper. By using the GL modeling simulation, we found a phenomenon that there is no Maxwell EM wave field which is excited by nonzero local sources inside of the single layer cloaked concealment. The theoretical proof of the phenomenon by GL method is proposed in this…
The possibility of making an optically large (many wavelengths in diameter) object appear invisible has been a subject of many recent studies. Exact invisibility scenarios for large (relative to the wavelength) objects involve (meta)materials with superluminal phase velocity (refractive index less than unity) and/or magnetic response. We introduce a new approximation applicable to certain device geometries in the eikonal limit: piecewise-uniform scaling of the refractive index. This transformation preserves the ray trajectories, but leads to a uniform phase delay. We show how to take advantage…
We consider an ideal invisibility cloak which is illuminated by monochromatic light and which moves in vacuum at constant relativistic velocity with respect to the common inertial frame of light source and observer. We show that, in general, the moving cloak becomes detectable by image distortions and by generating a broad frequency spectrum of the scattered light. However, for many special combinations of incident light frequency, wave vector of light, and cloak velocity, ideal cloaking remains possible. It becomes non-reciprocal though. This means that light rays emitted by the light source …
Electromagnetic wave behaviour in an anisotropic medium with a two dimensional arbitrary geometry is studied. The aim is to trace the path of a ray in such a complex medium for the purpose of achieving cloaking (invisibility). A coordinate transformation is carried out for the formulation of an annular region at the centre of the structure whose topology is a scaled geometry of outer boundary of the structure.
It is generally believed that transformation optics based cloaking, besides rendering the cloaked region invisible to detection by scattering of incident waves, also shields the region from those same waves. We demonstrate a coupling between the cloaked and uncloaked regions, exposing a difference between cloaking for rays and waves. Interior resonances allow this coupling to be amplified, and careful choice of parameters leads to effective cloaks with degraded shielding. As one application, we describe how to use transformation optics to hide sensors in the cloaked region and yet enable the s…
In this paper we analyze how Transformation Optics recipes can be applied to control the flow of surface plasmons on metal-dielectric interfaces. We study in detail five different examples: a cylindrical cloak, a beam shifter, a right-angle bend, a lens and a ground-plane cloak. First, we demonstrate that only the modification of the electric permittivity and magnetic permeability in the dielectric side can lead to almost perfect functionalities for surface plasmons. We also show that, thanks to the quasi two-dimensional character of surface plasmons and its inherent polarization, the applicat…
There is currently a great deal of interest in the invisibility cloaks recently proposed by Pendry et al. that are based in the transformation approach. They obtained their results using first order transformations. In recent papers Hendi et al. and Cai et al. considered invisibility cloaks with high order transformations. In this paper we study high order electromagnetic invisibility cloaks in transformation media obtained by high order transformations from general anisotropic media. We consider the case where there is a finite number of spherical cloaks located in different points in space. …
The intriguing concept of "anti-cloaking" has been recently introduced within the framework of transformation optics (TO), first as a "countermeasure" to invisibility-cloaking (i.e., to restore the scattering response of a cloaked target), and more recently in connection with "sensor invisibility" (i.e., to strongly reduce the scattering response while maintaining the field-sensing capabilities). In this paper, we extend our previous studies, which were limited to a two-dimensional cylindrical scenario, to the three-dimensional spherical case. More specifically, via a generalized (coordinate-m…
A kind of transformation media, which we shall call the "anti-cloak", is proposed to partially defeat the cloaking effect of the invisibility cloak. An object with an outer shell of "anti-cloak" is visible to the outside if it is coated with the invisible cloak. Fourier-Bessel analysis confirms this finding by showing that external electromagnetic wave can penetrate into the interior of the invisibility cloak with the help of the anti-cloak.
Invisibility cloak capable of hiding an object can be achieved by properly manipulating electromagnetic field. Such a remarkable ability has been shown in transformation and ray optics. Alternatively, it may be realistic to create a spatial cloak by means of confining electromagnetic field in three-dimensional arrayed waveguides and introducing appropriate collective curvature surrounding an object. We realize the artificial structure in borosilicate by femtosecond laser direct writing, where we prototype up to 5000 waveguides to conceal millimeter-scale volume. We characterize the performance…
An elliptic cylindrical wave expansion method by using Mathieu functions is developed to obtain the scattering field for a two-dimensional elliptic cylindrical invisibility cloak. The cloak material parameters are obtained from the spatial transformation approach. A near-ideal model of the invisibility cloak is set up to solve the boundary problem at the inner boundary in the cloak shell. The proposed design provides a more practical cloak geometry when compared to previous designs of elliptic cylindrical cloaks.
We introduce the concept of furtive quantum sensing, demonstrating the possibility of concealing quantum objects from matter-waves, while maintaining their ability to interact and get excited by the impinging particles. This is obtained by cloaking, with tailored homogeneous metamaterial layers, quantum systems having internal degrees of freedom. The effect is a low-observable quantum sensor with drastically reduced elastic scattering and optimized absorption levels, a concept that opens interesting venues in particle detection, high-efficiency electrical pumping and quantum supercomputing.
Coordinate transformations and matter waves cloaking
采用坐标变换方法，基于位置相关质量张量和势的薛定谔方程的协变形式，研究得到不同形状电子波隐身衣的质量张量和势的精确空间形式。
We describe families of potentials which act as approximate cloaks for matter waves, i.e., for solutions of the time-independent Schrödinger equation at energy $E$, with applications to the design of ion traps. These are derived from perfect cloaks for the conductivity and Helmholtz equations, by a procedure we refer to as isotropic transformation optics. If $W$ is a potential which is surrounded by a sequence $\{V_n^E\}_{n=1}^\infty$ of approximate cloaks, then for generic $E$, asymptotically in $n$ (i) $W$ is both undetectable and unaltered by matter waves originating externally to the cloak…
In this manuscript, we demonstrate the design and experimental proof of an optical cloaking structure which multi-directionally conceals a perfectly electric conductor (PEC) object from an incident plane wave. The dielectric modulation around the highly reflective scattering PEC object is determined by an optimization process for multi-directional cloaking purposes. And to obtain the multi-directional effect of the cloaking structure, an optimized slice is mirror symmetrized through a radial perimeter. Three-dimensional (3D) finite-difference time-domain method is integrated with genetic optim…
In this paper, we proposed the GLHUA double layer cloak; proved the properties of GLHUA double layer cloak; Using GL no scattering inversion and the pre cloak condition 6.1 to 6.4 in paper [1], we create GLHUA outer layer cloak radial relative parameter and angular relative parameter theoretically. We proved theorem 4.1 to theorem 4.4 that the phase velocity of the electromagnetic wave in GLHUA outer layer cloak is less than light speed and tends to zero at the boundary $r=R_1$, the EM wave tends to zero at $r=R1$; When source $r_s > R_2$ in the outside of the cloak and observer $r_o < R_o$ in…
There is currently a great deal of interest in the theoretical and practical possibility of cloaking objects from the observation by electromagnetic waves. The basic idea of these invisibility devices \cite{glu1, glu2, le},\cite{pss1} is to use anisotropic {\it transformation media} whose permittivity and permeability $\var^{λν}, μ^{λν}$, are obtained from the ones, $\var_0^{λν}, μ^{λν}_0$, of isotropic media, by singular transformations of coordinates. In this paper we study electromagnetic cloaking in the time-domain using the formalism of time-dependent scattering theory. This formalism all…
We discuss the global scattering response of invisibility cloaks over the entire frequency spectrum, from static to very high frequencies. Based on linearity, causality and energy conservation we show that the total extinction and scattering, integrated over all wavelengths, of any linear, passive, causal and non-diamagnetic cloak necessarily increases compared to the uncloaked case. In light of this general principle, we provide a quantitative measure to compare the global performance of different cloaking techniques and we discuss solutions to minimize the global scattering signature of an o…
Invisible cloak has long captivated the popular conjecture and attracted intensive research in various communities of wave dynamics, e.g., optics, electromagnetics, acoustics, etc. However, their inhomogeneous and extreme parameters imposed by transformation-optic method will usually require challenging realization with metamaterials, resulting in narrow bandwidth, loss, polarization-dependence, etc. On the contrary, we demonstrate that tunable thermodynamic cloak can be achieved with homogeneous and finite conductivity only employing naturally available materials. The controlled localization …
In this paper, we use the parameter retrieval method together with an analytical effective medium approach to design a well-performed invisible cloak, which is based on an empirical revised version of the reduced cloak. The designed cloak can be implemented by silver nanowires with elliptical cross-sections embedded in a polymethyl methacrylate host. This cloak is numerically proved to be robust for both the inner hidden object as well as incoming detecting waves, and is much simpler thus easier to manufacture when compared with the earlier proposed one [Nat. Photon. 1, 224 (2007)].
扫码添加微信好友，提出您的宝贵建议 👇
💡 备注请填写：网站反馈
发表机构由 AI 从论文文本抽取，如发现错误，欢迎反馈修正建议。