We study the transport properties of an overdamped Brownian particle which is simultaneously in contact with two thermal baths. The first bath is modeled by an additive thermal noise at temperature $T_A$. The second bath is associated with a multiplicative thermal noise at temperature $T_B$. The analytical expressions for the particle velocity and diffusion constant are derived for this system, and the reliability or coherence of transport is analyzed by means of their ratio in terms of a dimensionless Péclet number. We find that the transport is not very coherent, though one can get significantly higher currents.
The second law of thermodynamics is probabilistic in nature. Its formulation requires that the state of a system be described by a probability distribution. A natural question, thereby, arises as to whether a prior knowledge about the state of the system affects the second law. This question has now been nurtured over a century and its inception was done by C. Maxwell through his famous thought experiment wherein comes the idea of Maxwell's demon. The next important step in this direction was provided by L. Szilard who demonstrated a theoretical model for an information engine incorporating Ma…
Quantum Szilard engine constitutes an adequate interplay of thermodynamics, information theory and quantum mechanics. Szilard engines are in general operated by a Maxwell's Demon where Landauer's principle resolves the apparent paradoxes. Here we propose a Szilard engine setup without featuring an explicit Maxwell's demon. In a demonless Szilard engine, the acquisition of which-side information is not required, but erasure and the related heat dissipation still take place implicitly by the very nature of the work extraction process. We see that the insertion of the partition in a quantum Szila…
Maxwell refrigerator as a device that can transfer heat from a cold to hot temperature reservoir making use of information reservoir was introduced by Mandal et al. \cite{Mandal2013a}. The model has a two state demon and a bit stream interacting with two thermal reservoirs simultaneously. We work out a simpler version of the refrigerator where the demon and bit system interact with the reservoirs separately and for a duration long enough to establish equilibrium. The efficiency, $η$, of the device when working as an engine as well as the coefficient of performance (COP) when working as a refri…
A system in equilibrium does not evolve -- time independence is its telltale characteristic. However, in Newtonian physics the microstate of an individual system (a point in its phase space) evolves incessantly in accord with its equations of motion. Ensembles were introduced in XIX century to bridge that chasm between continuous motion of phase space points in Newtonian dynamics and stasis of thermodynamics: While states of individual classical systems inevitably evolve, a phase space distribution of such states -- an ensemble -- can be time-independent. I show that entanglement (e.g., with t…
Here we study the operation efficiency of a finite-size finite-response-time Maxwell's demon, who can make future predictions. We compare the heat and mass transport rate of predictive demons to non-predictive ones and find that predictive demons can achieve higher mass and heat transport rates over longer periods of time. We determine how the demon performance varies with response time, future sight, and the density of the gasses on which they operate.
The relation between entropy and information dates back to the classical Maxwell demon (MD) paradox, a thought experiment proposed in 1867 by J. C. Maxwell to violate the second law of thermodynamics. A variant of the classical MD is the Szilard engine proposed by L. Szilard in 1926 in which the demon observes, at a given time, the compartment occupied by a single molecule in a vessel and extracts work by operating a pulley device. Here we introduce the Continuous Maxwell Demon (CMD), a device capable of extracting arbitrarily large amounts of work per cycle by repeated measurements of the sta…
Maxwell's demons work by rectifying thermal fluctuations. They are not expected to function at macroscopic scales where fluctuations become negligible and dynamics become deterministic. We propose an electronic implementation of an autonomous Maxwell's demon that indeed stops working in the regular macroscopic limit as the dynamics becomes deterministic. However, we find that if the power supplied to the demon is scaled up appropriately, the deterministic limit is avoided and the demon continues to work. The price to pay is a decreasing thermodynamic efficiency. Our work suggests that novel st…
A CMOS-based implementation of an autonomous Maxwell's demon was recently proposed (Phys. Rev. Lett. 129, 120602) to demonstrate that a Maxwell demon can still work at macroscopic scales, provided that its power supply is scaled appropriately. Here, we first provide a full analytical characterization of the non-autonomous version of that model. We then study system-demon information flows within generic autonomous bipartite setups displaying a macroscopic limit. By doing so, we can study the thermodynamic efficiency of both the measurement and the feedback process performed by the demon. We fi…
An interesting preprint by Puru Gujrati, "Maxwell's Demon Must Remain Subservient to Clausius' Statement" [ of the Second Law of Thermodynamics ], traces the development and application of Maxwell's Demon. He argues against the Demon on thermodynamic grounds. Gujrati introduces and uses his own version of a generalized thermodynamics in his criticism of the Demon. The complexity of his paper and the lack of any accompanying numerical work piqued our curiousity. The internet provides well over two million "hits'' on the subject of "Maxwell's Demon". There are also hundreds of images of the Demo…
In a recent paper we have introduced a continuous version of the Maxwell demon (CMD) that is capable of extracting large amounts of work per cycle by repeated measurements of the state of the system. Here we underline its main features such as the role played by the Landauer limit in the average extracted work, the continuous character of the measurement process and the differences between our continuous Maxwell demon and an autonomous Maxwell demon. We demonstrate the reversal of Landauer's inequality depending on the thermodynamical and mechanical stability of the work extracting substance. …
An autonomous out of equilibrium Maxwell's demon is used to reverse the natural direction of the heat flux between two electric circuits kept at different temperatures and coupled by the electric thermal noise. The demon does not process any information, but it achieves its goal by using a frequency dependent coupling with the two reservoirs of the system. There is no energy flux between the demon and the system, but the total entropy production (system+demon) is positive. The demon can be power supplied by thermocouples. The system and the demon are ruled by equations similar to those of two …
Université Paris Cité（巴黎西岱大学）；CNRS（法国国家科学研究中心）；LIED（液体界面动力学实验室）；Université Paris-Saclay（巴黎萨克雷大学）；IN2P3（粒子与核物理研究所）；IJCLab（伊夫·克莱因朗之万实验室）；University of Barcelona（巴塞罗那大学）；Condensed Matter Physics Department（凝聚态物理系）；Institut de Nanociència i Nanotecnologia (IN2UB)（纳米科学与纳米技术研究所）
We distinguish traditional implementations of autonomous Maxwell demons from related linear devices that were recently proposed, not relying on the notions of measurements and feedback control. In both cases a current seems to flow against its spontaneous direction (imposed, e.g., by a thermal or electric gradient) without external energy intake. However, in the latter case, this current inversion may only be apparent. Even if the currents exchanged between a system and its reservoirs are inverted (by creating additional independent currents between system and demon), this is not enough to con…
Nearly all theoretical analyses of the Maxwell's demon focus on its energetic and entropic costs of operation. Here, we focus on its rate of operation. In our model, a demon's rate limitation stems from its finite response time and gate area. We determine the rate limits of mass and energy transfer, as well as entropic reduction for four such demons: Those that select particles according to (1) direction, (2) energy, (3) number and (4) entropy. Lastly, we determine the optimal gate size for a demon with small, finite response time, and compare our predictions with molecular dynamics simulation…
We introduce a family of Generalized Continuous Maxwell Demons (GCMDs) operating on idealized single-bit equilibrium devices that combine the single-measurement Szilard and the repeated measurements of the Continuous Maxwell Demon protocols. We derive the cycle distributions for extracted work, information-content, and time and compute the power and information-to-work efficiency fluctuations for the different models. We show that the efficiency at maximum power is maximal for an opportunistic protocol of continuous type in the dynamical regime dominated by rare events. We also extend the anal…
Brownian information engines can extract work from thermal fluctuations by utilizing information. So far, the studies on Brownian information engines consider the system in a thermal bath; however, many processes in nature occur in a nonequilibrium setting, such as the suspensions of self-propelled microorganisms or cellular environments called an active bath. Here, we introduce an archetypal model for Maxwell-demon type cyclic Brownian information engine operating in a Gaussian correlated active bath. The active engine can extract more work than its thermal counterpart, exceeding the bound se…
The first direct experimental replication of the Maxwell Demon thought experiment is outlined. The experiment determines the velocity/kinetic energy distribution of the particles in a sample by a novel interpretation of the results from a standard time-of-flight (TOF) small angle neutron scattering (SANS) procedure. Perspex at 293 K was subjected to neutrons at 82.2 K. The key result is a TOF velocity distribution curve that is a direct spatial and time-dependent microscopic probe of the velocity distribution of the Perspex nuclei at 293 K. Having this curve, one can duplicate the Demon's appr…
While quantum measurement theories are built around density matrices and observables, the laws of thermodynamics are based on processes such as are used in heat engines and refrigerators. The study of quantum thermodynamics fuses these two distinct paradigms. In this article, we highlight the usage of quantum process matrices as a unified language for describing thermodynamic processes in the quantum regime. We experimentally demonstrate this in the context of a quantum Maxwell's demon, where two major quantities are commonly investigated; the average work extraction $\langle W \rangle$ and th…
The Szilárd engine is a mechanism (akin to Maxwell's demon) for converting information into energy, which seemingly violates the second law of thermodynamics. Originally a classical thought experiment, it was extended to a quantized treatment by Zurek. Here, we examine a new, elegant model of a quantum Szilárd engine by replacing the traditional rigid box with a harmonic potential, extending the scope of the model. Remarkably, almost all calculations are exact. This article is suitable to students, researchers and educators interested in the conceptual links between information, entropy, and q…
Engineered dynamical maps combining coherent and dissipative transformations of quantum states with quantum measurements, have demonstrated a number of technological applications, and promise to be a crucial tool in quantum thermodynamic processes. Here, we exploit the control on the effective open spin qutrit dynamics of an NV center, to experimentally realize an autonomous feedback process (Maxwell demon) with tunable dissipative strength. The feedback is enabled by random measurement events that condition the subsequent dissipative evolution of the qutrit. The efficacy of the autonomous Max…
We argue that Maxwell's demon is incapable of creating a nonzero temperature difference. Hence, it does not destroy equilibrium and the second law is never at risk, contrary to the claim by Maxwell and accepted by many. It is therefore remarkable that despite this, the demon paradox has been a valuable source of new ideas. We use two independent arguments, one using classical equilibrium thermodynamics by extending Brillouin's approach, and the other one using equilibrium statistical mechanics and the central limit theorem.
