We study the generation of small neutrino masses in an extra-dimensional model, where right-handed neutrinos are allowed to propagate in the extra dimension, while the Standard Model particles are confined to a brane. Motivated by the fact that extra-dimensional models are non-renormalizable, we truncate the Kaluza-Klein towers at a maximal extra-dimensional momentum. The structure of the bulk Majorana mass term, motivated by the Sherk-Schwarz mechanism, implies that the right-handed Kaluza-Klein neutrinos pair to form Dirac neutrinos, except for a number of unpaired Majorana neutrinos at the top of each tower. These heavy Majorana neutrinos are the only sources of lepton number breaking in the model, and similarly to the type-I seesaw mechanism, they naturally generate small masses for the left-handed neutrinos. The lower Kaluza-Klein modes mix with the light neutrinos, and the mixing effects are not suppressed with respect to the light-neutrino masses. Compared to conventional fermionic seesaw models, such mixing can be more significant. We study the signals of this model at the Large Hadron Collider, and find that the current low-energy bounds on the non-unitarity of the leptonic mixing matrix are strong enough to exclude an observation.
The presence of small neutrino masses and flavour mixings can be accounted for naturally in various models about extensions of the standard model, particularly in the seesaw mechanism models. In this work, we present a minimally extended seesaw framework with two right-handed neutrinos, where the active neutrino masses are derived in the radiative regime. Using the framework it can be shown that within certain mass limits, the light neutrino mass term can approach a form that is similar to its form under the type-I seesaw mechanism. Apart from this, we show that the decay width of right-handed…
We investigate a prospect of probing the type-III seesaw neutrino mass generation mechanism at various collider experiments by searching for a disappearing track and a displaced vertex signature originating from the decay of $SU(2)_L$ triplet fermion ($Σ$). Since $Σ$ is primarily produced at colliders through the electroweak gauge interactions, its production rate is uniquely determined by its mass. We find that a $Σ$ particle with a mass of a few hundred GeV produces a disappearing track signature from the decay of its charged component, which can be searched at the HL-LHC. Furthermore, we sh…
The Type-II seesaw model is a well-motivated new physics scenario to address the origin of the neutrino mass issue. We show that this model can easily accommodate an absolutely stable vacuum until the Planck scale, however with strong limit on the exotic scalar masses and the corresponding mixing angle. We examine the model prediction at the current and future high luminosity run of the Large Hadron Collider (LHC) for the scalar masses and mixing angles fixed at such high-scale valid region. Specifically, we device the associated and pair production of the charged scalars as a new probe of the…
The same-sign tetralepton signature via mixing of neutral Higgs bosons and their cascade decays to charged Higgs bosons is a unique signal in the type-II seesaw model. In this paper, we study this signature at future lepton colliders, such as ILC, CLIC, and MuC. Constrained by direct search, $H^{\pm\pm}\to W^\pm W^\pm$ is the only viable decay mode for $M_{A^0}=400$ GeV at $\sqrt{s}=1$ TeV ILC. With an integrated luminosity of $\mathcal{L}=8~ \mathrm{ab}^{-1}$, the promising region with about 150 signal events corresponds to a narrow band in the range of $10^{-4}~\text{GeV}\lesssim v_Δ\lesssim…
Inverse seesaw is a genuine TeV scale seesaw mechanism. In it active neutrinos with masses at eV scale requires lepton number be explicitly violated at keV scale and the existence of new physics, in the form of heavy neutrinos, at TeV scale. Therefore it is a phenomenologically viable seesaw mechanism since its signature may be probed at the LHC. Moreover it is successfully embedded into gauge extensions of the standard model as the 3-3-1 model with the right-handed neutrinos. In this work we revisit the implementation of this mechanism into the 3-3-1 model and employ deep learning analysis to…
A certain class of new physics models includes long-lived particles which are singlet under the Standard Model (SM) gauge group.A displaced vertex is a spectacular signature to probe such particles productions at the high energy colliders, with a negligible SM background. In the context of the minimal gauged $B-L$ extended SM, we consider a pair creation of Majorana right-handed neutrinos (RHNs) at the high energy colliders through the production of the SM and the $B-L$ Higgs bosons and their subsequent decays into RHNs. With parameters reproducing the neutrino oscillation data, we show that t…
In this work we study the viable parameter space of the scalar sector in the type-II seesaw model. In identifying the allowed parameter space, we employ constraints from low energy precision measurements, theoretical considerations and the 125-GeV Higgs data. These tools prove effective in constraining the model parameter space. Moreover, the triplet also offers a rich collider phenomenology from having additional scalars that have unique collider signatures. We find that direct collider searches for these scalars can further probe various parts of the viable parameter space. These parts can b…
Motivated by the short-baseline neutrino oscillation anomalies that suggest the existence of sterile neutrinos at the eV scale, we construct a scenario of a seesaw mechanism for 3+1 light neutrinos implemented by warped compactification of an extra dimension. As the seesaw mechanism necessitates at least two right-handed neutrinos at mass scales much larger than eV, incorporating an eV-scale sterile neutrino into a seesaw entails large mass hierarchies among the singlet neutrinos. We show that such hierarchies can be naturally explained by moderate fluctuations of the five-dimensional fermion …
In this paper we present a higher-dimensional seesaw mechanism. We consider a single, flat extra dimension, where a fat brane is localized and contains the standard model (SM) fields, similar to Universal Extra Dimension models. There is only one Dirac fermion in the bulk, and in four dimensions it results in two towers of Kaluza-Klein (KK) Majorana sterile neutrinos, whose mass mixing with the SM neutrinos is suppressed due to a brane-localized kinetic term. The interaction between the sterile neutrinos and the SM is through the usual coupling with the Higgs boson, where the coupling depends …
Verifiable type-III seesaw and dark matter in a gauged $\boldsymbol{U(1)_{\rm B-L}}$ symmetric model
Indian Institute of Technology Goa（果阿理工学院）；Sungkyunkwan University（成均馆大学）；Indian Institute of Technology Hyderabad（海得拉巴理工学院）；Bhabha Atomic Research Centre（巴巴原子研究中心）；Homi Bhabha National Institute（霍米·巴巴国立研究所）
We propose a left-right symmetric framework with universal seesaw mechanism for the generation of masses of the Standard Model quarks and leptons. Heavy vector-like singlet quarks and leptons are required for generation of Standard Model-like quark and lepton masses through seesaw mechanism. A softly broken $Z_2$ symmetry distinguishes the lepton sector and the quark sector of the model. This leads to the presence of some lepton-specific interactions that can produce unique collider signatures which can be explored at the current Large Hadron Collider run and also future colliders.
We investigate the pair production of right-handed neutrinos from the decay of a light $B-L$ scalar in the $U(1)_{B-L}$ model. The $B-L$ scalar mixes to the SM Higgs, and the physical scalar is required to be lighter than the observed Higgs. The produced right-handed neutrinos are predicted to be long-lived according to the type-I seesaw mechanism, and yield potentially distinct signatures such as displaced vertex and time-delayed leptons at the CMS/ATLAS/LHCb, as well as signatures at the far detectors including the CODEX-b, FACET, FASER, MoEDAL-MAPP and MATHUSLA. We analyze the sensitivity r…
The type-II seesaw mechanism with an isospin-triplet scalar $Δ_L$ provides one of the most compelling explanations for the observed smallness of neutrino masses. The triplet contains a doubly-charged component $H_L^{\pm\pm}$, which dominantly decays to either same-sign dileptons or to a pair of $W$ bosons, depending on the size of the triplet vacuum expectation value. However, there exists a range of Yukawa couplings $f_L$ of the triplet to the charged leptons, wherein a relatively light $H_L^{\pm\pm}$ tends to be long-lived, giving rise to distinct displaced-vertex signatures at the high-ener…
We discuss the leptonic flavor structure generated by a brane shifted extra dimensional seesaw model with a single right handed neutrino in the bulk. In contrast to previous works, no unitarity approximation for the $3 \times 3$ submatrix has been employed. This allows to study phenomenological signatures such as lepton flavor violating decays. A strong prediction of the model, assuming CP conservation, are the ratios of flavor violating charged lepton decay and Z decay branching ratios which are correlated with the neutrino mixing angles and the neutrino mass hierarchy. Furthermore, it is pos…
The type II seesaw mechanism is an attractive way to generate the observed light neutrino masses. It postulates a SU(2)$_\mathrm{L}$-triplet scalar field, which develops an induced vacuum expectation value after electroweak symmetry breaking, giving masses to the neutrinos via its couplings to the lepton SU(2)$_\mathrm{L}$-doublets. When the components of the triplet field have masses around the electroweak scale, the model features a rich phenomenology. We discuss the current allowed parameter space of the minimal low scale type II seesaw model, taking into account all relevant constraints, i…
We consider an extension of the Standard Model (SM) augmented by two neutral singlet fermions per generation and a leptoquark. In order to generate the light neutrino masses and mixing, we incorporate inverse seesaw mechanism. The right handed neutrino production in this model is significantly larger than the conventional inverse seesaw scenario. We analyze the different collider signatures of this model and find that the final states associated with three or more leptons, multi jet and at least one b-tagged and (or) $τ$-tagged jet can probe larger RH neutrino mass scale. We have also proposed…
我们显示了普遍的跷跷板在额外的维度设置，其中三个额外的矢量类字段存在于5D散装重质量。我们采用左右对称模型的框架。在四维情况下，可以很容易地得到代替类矢量质量的通用跷跷板公式M_i到2 M_* tan [pi RM_i]（M_*：5D普朗克尺度，M_i：类矢量体质量，R：紧化半径）.狄拉克中微子质量的微小性可以在5D系统中自然地得到解释。我们还展示了马约拉纳中微子的情况。
Explaining the tiny neutrino masses and non-zero mixings have been one of the key motivations for going beyond the framework of the Standard Model (SM). We discuss a collider testable model for generating neutrino masses and mixings via radiative seesaw mechanism. That the model does not require any additional symmetry to forbid tree-level seesaws makes its collider phenomenology interesting. The model includes multi-charged fermions/scalars at the TeV scale to realize the Weinberg operator at 1-loop level. After deriving the constraints on the model parameters resulting from the neutrino osci…
