Stephen T. Bryson, Peter Tenenbaum, Jon M. Jenkins, Hema Chandrasekaran, Todd Klaus, Douglas A. Caldwell, Ronald L. Gilliland, Michael R. Haas, Jessie L. Dotson… 展开作者
Stephen T. Bryson, Peter Tenenbaum, Jon M. Jenkins, Hema Chandrasekaran, Todd Klaus, Douglas A. Caldwell, Ronald L. Gilliland, Michael R. Haas, Jessie L. Dotson, David G. Koch, William J. Borucki
备注:
10 pages, 5 figures, accepted by ApJ Letters. Version accepted for publication.
Kepler seeks to detect sequences of transits of Earth-size exoplanets orbiting Solar-like stars. Such transit signals are on the order of 100 ppm. The high photometric precision demanded by Kepler requires detailed knowledge of how the Kepler pixels respond to starlight during a nominal observation. This information is provided by the Kepler pixel response function (PRF), defined as the composite of Kepler's optical point spread function, integrated spacecraft pointing jitter during a nominal cadence and other systematic effects. To provide sub-pixel resolution, the PRF is represented as a piecewise-continuous polynomial on a sub-pixel mesh. This continuous representation allows the prediction of a star's flux value on any pixel given the star's pixel position. The advantages and difficulties of this polynomial representation are discussed, including characterization of spatial variation in the PRF and the smoothing of discontinuities between sub-pixel polynomial patches. On-orbit super-resolution measurements of the PRF across the Kepler field of view are described. Two uses of the PRF are presented: the selection of pixels for each star that maximizes the photometric signal to noise ratio for that star, and PRF-fitted centroids which provide robust and accurate stellar positions on the CCD, primarily used for attitude and plate scale tracking. Good knowledge of the PRF has been a critical component for the successful collection of high-precision photometry by Kepler.
The discovery of an exomoon would provide deep insights into planet formation and the habitability of planetary systems, with transiting examples being particularly sought after. Of the hundreds of Kepler planets now discovered, the seven-planet system Kepler-90 is unusual for exhibiting an unidentified transit-like signal in close proximity to one of the transits of the long-period gas-giant Kepler-90g, as noted by Cabrera et. al. (2014). As part of the 'Hunt for Exomoons with Kepler' (HEK) project, we investigate this possible exomoon signal and find it passes all conventional photometric, d…
The Kepler mission has provided a wealth of data, revealing new insights in time-domain astronomy. However, Kepler's single band-pass has limited studies to a single wavelength. In this work we build a data-driven, pixel-level model for the Pixel Response Function (PRF) of Kepler targets, modeling the image data from the spacecraft. Our model is sufficiently flexible to capture known detector effects, such as non-linearity, intra-pixel sensitivity variations, and focus change. In theory, the shape of the Kepler PRF should also be weakly wavelength dependent, due to optical chromatic aberration…
We announce FluxCT, a web tool for identifying contaminating flux in Kepler and TESS target pixel files due to secondary visual sources. We demonstrate the usage of this tool and discuss the benefits of this tool over a simple Gaia radius search. FluxCT focuses on clarity and simplicity, where the only input needed from the user is a KIC or TIC ID. By more appropriately accounting for the actual shape of the photometric pixel apertures, FluxCT can produce much more accurate estimates of contaminating flux than simple radial cone searches.
In today's mailing, Hogg et al. propose image modeling techniques to maintain 10-ppm-level precision photometry in Kepler data with only two working reaction wheels. While these results are relevant to many scientific goals for the repurposed mission, all modeling efforts so far have used a toy model of the Kepler telescope. Because the two-wheel performance of Kepler remains to be determined, we advocate for the consideration of an alternate strategy for a >1 year program that maximizes the science return from the "low-torque" fields across the ecliptic plane. Assuming we can reach the precis…
Observations of very low-mass stars with Kepler represent an excellent opportunity to search for planetary transits and to characterize optical photometric variability at the cool end of the stellar mass distribution. In this paper, we present low-resolution red optical spectra that allow us to identify 18 very low-mass stars that have Kepler light curves available in the public archive. Spectral types of these targets are found to lie in the range dM4.5--dM8.5, implying spectrophotometric distances from 17 pc to 80 pc. Limits to the presence of transiting planets are placed from modelling of …
Astronomical observations are affected by several kinds of noise, each with its own causal source; there is photon noise, stochastic source variability, and residuals coming from imperfect calibration of the detector or telescope. The precision of NASA Kepler photometry for exoplanet science---the most precise photometric measurements of stars ever made---appears to be limited by unknown or untracked variations in spacecraft pointing and temperature, and unmodeled stellar variability. Here we present the Causal Pixel Model (CPM) for Kepler data, a data-driven model intended to capture variabil…
Inspired by the recent Kepler discoveries of circumbinary planets orbiting nine close binary stars, we explore the fate of the former as the latter evolve off the main sequence. We combine binary star evolution models with dynamical simulations to study the orbital evolution of these planets as their hosts undergo common-envelope stages, losing in the process a tremendous amount of mass on dynamical timescales. Five of the systems experience at least one Roche-lobe overflow and common-envelope stages (Kepler-1647 experiences three), and the binary stars either shrink to very short orbits or co…
The Kepler Mission was designed to measure the frequency of Earth-size planets in the habitable zone of Sun-like stars. A crucial component for recovering the underlying planet population from a sample of detected planets is understanding the completeness of that sample - what fraction of the planets that could have been discovered in a given data set were actually detected. Here we outline the information required to determine the sample completeness, and describe an experiment to address a specific aspect of that question, which is the issue of transit signal recovery. We investigate the ext…
Ten days of commissioning data (Quarter 0) and thirty-three days of science data (Quarter 1) yield instrumental flux timeseries of ~150,000 stars that were combed for transit events, termed Threshold Crossing Events (TCE), each having a total detection statistic above 7.1-sigma. TCE light curves are modeled as star+planet systems. Those returning a companion radius smaller than 2R_J are assigned a KOI (Kepler Object of Interest) number. The raw flux, pixel flux, and flux-weighted centroids of every KOI are scrutinized to assess the likelihood of being an astrophysical false-positive versus the…
The Kepler planet sample can only be used to reconstruct the underlying planet occurrence rate if the detection efficiency of the Kepler pipeline is known, here we present the results of a second experiment aimed at characterising this detection efficiency. We inject simulated transiting planet signals into the pixel data of ~10,000 targets, spanning one year of observations, and process the pixels as normal. We compare the set of detections made by the pipeline with the expectation from the set of simulated planets, and construct a sensitivity curve of signal recovery as a function of the sig…
NASA's Kepler mission observed background regions across its field of view for more than three consecutive years using custom designed super apertures (EXBA masks). Since these apertures were designed to capture a region of the sky rather than single targets, the Kepler Science Data Processing pipeline produced Target Pixel Files, but did not produce light curves for the sources within these background regions. In this work we produce light curves for $9,327$ sources observed in the EXBA masks. These light curves are generated using aperture photometry estimated from the instrument's Pixel Res…
We present ground-based observations from the Discovery Channel Telescope (DCT) of three transits of Kepler-445c---a supposed super-Earth exoplanet with properties resembling GJ 1214b---and demonstrate that the transit depth is approximately 50 percent shallower than the depth previously inferred from Kepler Spacecraft data. The resulting decrease in planetary radius significantly alters the interpretation of the exoplanet's bulk composition. Despite the faintness of the M4 dwarf host star, our ground-based photometry clearly recovers each transit and achieves repeatable 1-sigma precision of a…
The Kepler Mission Science Operations Center (SOC) performs several critical functions including managing the ~156,000 target stars, associated target tables, science data compression tables and parameters, as well as processing the raw photometric data downlinked from the spacecraft each month. The raw data are first calibrated at the pixel level to correct for bias, smear induced by a shutterless readout, and other detector and electronic effects. A background sky flux is estimated from ~4500 pixels on each of the 84 CCD readout channels, and simple aperture photometry is performed on an opt…
We present an analysis of the KOI-13.01 candidate exoplanet system included in the September 2011 Kepler data release. The host star is a known and relatively bright $(m_{\rm KP} = 9.95)$ visual binary with a separation significantly smaller (0.8 arcsec) than the size of a Kepler pixel (4 arcsec per pixel). The Kepler light curve shows both primary and secondary eclipses, as well as significant out-of-eclipse light curve variations. We confirm that the transit occurs round the brighter of the two stars. We model the relative contributions from (i) thermal emission from the companion, (ii) plan…
We present the first photometric observations of trans-Neptunian objects (TNOs) taken with the Kepler space telescope, obtained in the course of the K2 ecliptic survey. Two faint objects have been monitored in specifically designed pixel masks that were centered on the stationary points of the objects, when their daily motion was the slowest. In the design of the experiment, only the apparent path of these objects were retrieved from the detectors, i.e. the costs in terms of Kepler pixels were minimized. Because of the faintness of the targets we employ specific reduction techniques and co-add…
In this work we empirically measure the detection efficiency of Kepler pipeline used to create the final Kepler Threshold Crossing Event (TCE; Twicken et al. 2016) and planet candidate catalogs (Thompson et al. 2018), a necessary ingredient for occurrence rate calculations using these lists. By injecting simulated signals into the calibrated pixel data and processing those pixels through the pipeline as normal, we quantify the detection probability of signals as a function of their signal strength and orbital period. In addition we investigate the dependence of the detection efficiency on para…
We present a comprehensive catalog of cool (period $P\gtrsim 2\,\mathrm{yr}$) transiting planet candidates in the four-year light curves from the prime \kepler\ mission. Most of the candidates show only one or two transits and have largely been missed in the original Kepler Object of Interest catalog. Our catalog is based on all known such candidates in the literature as well as new candidates from the search in this paper, and provides a resource to explore the planet population near the snow line of Sun-like stars. We homogeneously performed pixel-level vetting, stellar characterization with…
With each new version of the Kepler pipeline and resulting planet candidate catalogue, an updated measurement of the underlying planet population can only be recovered with an corresponding measurement of the Kepler pipeline detection efficiency. Here, we present measurements of the sensitivity of the pipeline (version 9.2) used to generate the Q1-Q17 DR24 planet candidate catalog (Coughlin et al. 2016). We measure this by injecting simulated transiting planets into the pixel-level data of 159,013 targets across the entire Kepler focal plane, and examining the recovery rate. Unlike previous ve…
NASA's Kepler Mission uses transit photometry to determine the frequency of earth-size planets in or near the habitable zone of Sun-like stars. The mission reached a milestone toward meeting that goal: the discovery of its first rocky planet, Kepler-10b. Two distinct sets of transit events were detected: 1) a 152 +/- 4 ppm dimming lasting 1.811 +/- 0.024 hours with ephemeris T[BJD]=2454964.57375+N*0.837495 days and 2) a 376 +/- 9 ppm dimming lasting 6.86 +/- 0.07 hours with ephemeris T[BJD]=2454971.6761+N*45.29485 days. Statistical tests on the photometric and pixel flux time series establishe…
High-precision time series photometry with the Kepler satellite has been crucial to our understanding both of exoplanets, and via asteroseismology, of stellar physics. After the failure of two reaction wheels, the Kepler satellite has been repurposed as Kepler-2 (K2), observing fields close to the ecliptic plane. As these fields contain many more bright stars than the original Kepler field, K2 provides an unprecedented opportunity to study nearby objects amenable to detailed follow-up with ground-based instruments. Due to bandwidth constraints, only a small fraction of pixels can be downloaded…
Three transiting exoplanet candidate stars were discovered in a ground-based photometric survey prior to the launch of NASA's {\it Kepler} mission. {\it Kepler} observations of them were obtained during Quarter 1 of the {\it Kepler} mission. All three stars are faint by radial velocity follow-up standards, so we have examined these candidates with regard to eliminating false positives and providing high confidence exoplanet selection. We present a first attempt to exclude false positives for this set of faint stars without high resolution radial velocity analysis. This method of exoplanet conf…
The Kepler Mission has provided unprecedented, nearly continuous photometric data of $\sim$200,000 objects in the $\sim$105 deg$^{2}$ field of view from the beginning of science operations in May of 2009 until the loss of the second reaction wheel in May of 2013. The Kepler Eclipsing Binary Catalog contains information including but not limited to ephemerides, stellar parameters and analytical approximation fits for every known eclipsing binary system in the Kepler Field of View. Using Target Pixel level data collected from Kepler in conjunction with the Kepler Eclipsing Binary Catalog, we ide…
Following up the Kepler field with PLATO: Transit Timing Performance
University of Warwick(华威大学);Centre for Exoplanets and Habitability, University of Warwick(华威大学系外行星与宜居性中心);Centre for Space Domain Awareness, University of Warwick(华威大学太空领域感知中心);LIRA, Observatoire de Paris, Université PSL, Sorbonne Université, Université Paris Cité, CY Cergy Paris Université, CNRS(巴黎天文台、PSL大学、索邦大学、巴黎西岱大学、CY塞尔吉巴黎大学、法国国家科学研究中心LIRA实验室);Institute for Astronomy, KU Leuven(荷语鲁汶大学天文学研究所);Isaac Newton Group of Telescopes(艾萨克·牛顿望远镜组)
The original {\it Kepler} mission observed and characterized over 2400 eclipsing binaries in addition to its prolific exoplanet detections. Despite the mechanical malfunction and subsequent non-recovery of two reaction wheels used to stabilize the instrument, the {\it Kepler} satellite continues collecting data in its repurposed {\it K2} mission surveying a series of fields along the ecliptic plane. Here we present an analysis of the first full baseline {\it K2} data release: the Campaign 0 data-set. In the 7761 light curves, we have identified a total of 207 eclipsing binaries. Of these, 97 a…
The lithium doublet at 6708 Å provides an age diagnostic for main sequence FGK dwarfs. We measured the abundance of lithium in 1305 stars with detected transiting planets from the Kepler Mission using high-resolution spectroscopy. Our catalog of lithium measurements from this sample have a range of abundance from A(Li) = 3.11 $\pm$ 0.07 to an upper limit of $-$0.84 dex. For a magnitude-limited sample that comprises 960 of the 1305 stars, our Keck-HIRES spectra have a median S/N = 45 per pixel at $\sim$6700 Å with spectral resolution $\fracλ{Δλ}$ = $R$ = 55,000. We identify 80 young stars that …
We present an update to the EVEREST K2 pipeline that addresses various limitations in the previous version and improves the photometric precision of the de-trended light curves. We develop a fast regularization scheme for third order pixel level decorrelation (PLD) and adapt the algorithm to include the PLD vectors of neighboring stars to enhance the predictive power of the model and minimize overfitting, particularly for faint stars. We also modify PLD to work for saturated stars and improve its performance on extremely variable stars. On average, EVEREST 2.0 light curves have 10-20% higher p…
KOI-13.01, a planet-sized companion in an optical double star was announced as one of the 1235 Kepler planet candidates in February 2011. The transit curves show significant distortion that was stable over the ~130 days time-span of the data. Here we investigate the phenomenon via detailed analyses of the two components of the double star and a re-reduction of the Kepler data with pixel-level photometry. Our results indicate that KOI-13 is a common proper motion binary, with two rapidly rotating components (v sin i ~ 65--70 km/s). We identify the host star of KOI-13.01 and conclude that the tr…
Rescuing Kepler's False Positives: A Possible Habitable Zone Exoplanet in the Triple Star System KOI-1623
Institute for Astronomy, University of Hawai‘i(夏威夷大学天体物理研究所);Department of Astronomy, University of Texas at Austin(德克萨斯大学奥斯汀分校天文学系);Institute for Astronomy, University of Edinburgh, Royal Observatory(爱丁堡大学天体物理研究所皇家天文台);Department of Astronomy, California Institute of Technology(加州理工学院天文学系);University of Notre Dame, Department of Physics and Astronomy(圣母院大学物理与天文学系)
An investigation of the G-type stellar population with Kepler (as done by Maehara et al.) shows that less than 1 per cent of those stars show superflares. Due to the large pixel scale of Kepler ($\sim4 arcsec \: px^{-1}$), it is still not clear whether the detected superflares really occur on the G-type stars. Knowing the origin of such large brightenings is important to study their frequency statistics, which are uncertain due to the low number of sun-like stars ($T_{eff} = 5600-6000 \:K$ and $P_{rot} > 10 \:d$) which are currently considered to exhibit superflares. We present a complete Kepl…