We report on the magnetic hyperthermia properties of chemically synthesized ferromagnetic 11 and 16 nm Fe(0) nanoparticles of cubic shape displaying the saturation magnetization of bulk iron. The specific absorption rate measured on 16 nm nanocubes is 1690+-160 W/g at 300 kHz and 66 mT. This corresponds to specific losses-per-cycle of 5.6 mJ/g, largely exceeding the ones reported in other systems. A way to quantify the degree of optimization of any system with respect to hyperthermia applications is proposed. Applied here, this method shows that our nanoparticles are not fully optimized, probably due to the strong influence of magnetic interactions on their magnetic response. Once protected from oxidation and further optimized, such nano-objects could constitute efficient magnetic cores for biomedical applications requiring very large heating power.
Among the strategies to fight cancer, multi-therapeutic approaches are considered as a wise choice to put in place multiple weapons to suppress tumors. In this work, to combine chemotherapeutic effects to magnetic hyperthermia when using biocompatible scaffolds, we have established an electrospinning method to produce nanofibers of polycaprolactone loaded with magnetic nanoparticles as heat mediators to be selectively activated under alternating magnetic field and doxorubicin as a chemotherapeutic drug. Production of the fibers was investigated with iron oxide nanoparticles of peculiar cubic s…
The performance of magnetic nanoparticles is intimately entwined with their structure, mean size and magnetic anisotropy. Besides, ensembles offer a unique way of engineering the magnetic response by modifying the strength of the dipolar interactions between particles. Here we report on an experimental and theoretical analysis of magnetic hyperthermia, a rapidly developing technique in medical research and oncology. Experimentally, we demonstrate that single-domain cubic iron oxide particles resembling bacterial magnetosomes have superior magnetic heating efficiency compared to spherical parti…
We report on the magnetic and hyperthermia properties of iron nanoparticles synthesized by organometallic chemistry. They are 5.5 nm in diameter and display a saturation magnetization close to the bulk one. Magnetic properties are dominated by the contribution of aggregates of nanoparticles with respect to individual isolated nanoparticles. Alternative susceptibility measurements are been performed on a low interacting system obtained after eliminating the aggregates by centrifugation. A quantitative analysis using the Gittleman s model allow a determination of the effective anisotropy Keff = …
Iron oxide nanoparticles have tremendous scientific and technological potential in a broad range of technologies, from energy applications to biomedicine. To improve their performance, single-crystalline and defect-free nanoparticles have thus far been aspired. However, in several recent studies defect-rich nanoparticles outperform their defect-free counterparts in magnetic hyperthermia and magnetic particle imaging. Here, an overview on the state-of-the-art of design and characterization of defects and resulting spin disorder in magnetic nanoparticles is presented with a focus on iron oxide n…
Micromagnetic simulation results on dynamic hysteresis loops of clusters of iron oxide nanoparticles (NPs) with internal structure composed of nanorods are compared with the widely used macrospin approximation. Such calculations allowing for nanorod-composed NPs is facilitated by a previously developed coarse-graining method based on the renormalization group approach. With a focus on applications to magnetic hyperthermia, we show that magnetostatic interactions improve the heating performance of NPs in chains and triangles, and reduce heating performance in fcc arrangements. Hysteresis loops …
A low-cost and simple setup for measuring the high-frequency hysteresis loops of magnetic samples is described. An AMF in the range 6-100 kHz with amplitude up to 80 mT is produced by a Litz wire coil. The latter is air-cooled using a forced-air approach so no water flow is required to run the setup. High-frequency hysteresis loops are measured using a system of pick-up coils and numerical integration of signals. Reproducible measurements are obtained in the frequency range of 6-56 kHz. Measurement examples on ferrite cylinders and on iron oxide nanoparticle ferrofluids are shown. Comparison w…
The present study investigates the effect of different reaction times on the crystallinity, surface morphology and size of iron oxide nanoparticles. In this synthetic system, aqueous iron (III) nitrate (Fe(NO$_3$)$_3\cdot9$H$_2$O) nonahydrate, provided the iron source and triethylamine was the precipitant and alkaline agent. The as-synthesised iron oxide nanoparticles were characterised by X-ray diffraction (XRD), Rietveld analysis, Scanning Electron Microscopy (SEM) and Fourier transform infrared spectroscopy (FTIR). Prolonged reaction times indicated the change on nanoparticle shape from elo…
Magnetic materials for specific applications require an accurate control and complete comprehension of their magnetic properties. In particular, nanoparticles embedded in a polycrystalline matrix emerge as good candidates for applications due to the possibility of tuning the magnetic properties through interface interaction effects. Here, iron/wüstite composite is prepared using high energy mechanical milling from iron powder and water. The sample is analyzed by X-ray diffraction, dynamic laser light scattering, Mössbauer spectroscopy, field cooling and zero field cooling curves, magnetization…
The polyol route is a versatile and up-scalable method to produce large batches of iron oxide nanoparticles with well-defined structure and magnetic properties. Controlling parameters such as temperature and duration of reaction, heating profile, nature of polyol solvent or of organometallic precursors were reported in previous studies of literature, but none of them described yet the crucial role of water in the forced hydrolysis pathway, whose presence is mandatory for nanoparticle production. This communication investigates the influence of the water amount and temperature at which it is in…
In contrast to bulk materials, nanoscale crystal growth is critically influenced by size- and shape-dependent properties. However, it is challenging to decipher how stoichiometry, in the realm of mixed-valence elements, can act to control physical properties, especially when complex bonding is implicated by short and long-range ordering of structural defects. Here, solution-grown iron-oxide nanocrystals (NCs) of the pilot wustite system are found to convert into iron-deficient rock-salt and ferro-spinel sub-domains, but attain a surprising tetragonally distorted local structure. Cationic vacan…
Micromagnetic simulations based on the stochastic Landau-Lifshitz-Gilbert equation are used to calculate dynamic magnetic hysteresis loops relevant to magnetic hyperthermia. With the goal to effectively simulate room-temperature loops for large iron-oxide-based systems at relatively slow sweep rates on the order of 1 Oe/ns or less, a previously derived renormalization group approach for coarse-graining (Grinstein and Koch, Phys. Rev. Lett. 20, 207201, 2003) is modified and applied to calculating loops for a magnetite nanorod. The nanorod modelled is the building block for larger nanoparticles …
The Hidden Cost of Two-Dimensional TEM Reconstruction of Magnetic Nanoparticle Morphology
Universidade de Santiago de Compostela（圣地亚哥德孔波斯特拉大学）；Instituto de Materiais (iMATUS), Universidade de Santiago de Compostela（圣地亚哥德孔波斯特拉大学材料研究所）；Instituto de Nanociencia y Materiales de Aragón (INMA, UNIZAR-CSIC)（阿拉贡纳米科学与材料研究所）；Instituto de Ciencia de Materiales de Madrid (ICMM, CSIC)（马德里材料科学研究所）；University of York（约克大学）；Fundación Agencia Aragonesa para la Investigación y el Desarrollo (ARAID)（阿拉贡研究与开发署基金会）；Sheffield Hallam University（谢菲尔德哈勒姆大学）；Universitat de Barcelona（巴塞罗那大学）
